2 * Copyright (c) 2000 Matthew N. Dodd
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * $FreeBSD: src/sys/dev/ex/if_ex_isa.c,v 1.3.2.1 2001/03/05 05:33:20 imp Exp $
27 * $DragonFly: src/sys/dev/netif/ex/if_ex_isa.c,v 1.2 2003/06/17 04:28:25 dillon Exp $
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/kernel.h>
33 #include <sys/socket.h>
35 #include <sys/module.h>
38 #include <machine/bus.h>
39 #include <machine/resource.h>
43 #include <net/if_arp.h>
44 #include <net/if_media.h>
47 #include <isa/isavar.h>
48 #include <isa/pnpvar.h>
50 #include <dev/ex/if_exreg.h>
51 #include <dev/ex/if_exvar.h>
53 /* Bus Front End Functions */
54 static void ex_isa_identify __P((driver_t *, device_t));
55 static int ex_isa_probe __P((device_t));
56 static int ex_isa_attach __P((device_t));
59 static void ex_pnp_wakeup (void *);
61 SYSINIT(ex_pnpwakeup, SI_SUB_CPU, SI_ORDER_ANY, ex_pnp_wakeup, NULL);
64 static device_method_t ex_methods[] = {
65 /* Device interface */
66 DEVMETHOD(device_identify, ex_isa_identify),
67 DEVMETHOD(device_probe, ex_isa_probe),
68 DEVMETHOD(device_attach, ex_isa_attach),
73 static driver_t ex_driver = {
76 sizeof(struct ex_softc),
79 devclass_t ex_devclass;
81 DRIVER_MODULE(ex, isa, ex_driver, ex_devclass, 0, 0);
83 static struct isa_pnp_id ex_ids[] = {
84 { 0x3110d425, NULL }, /* INT1031 */
85 { 0x3010d425, NULL }, /* INT1030 */
90 #define EX_PNP_WAKE 0x279
92 static u_int8_t ex_pnp_wake_seq[] =
93 { 0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,
94 0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,
95 0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,
96 0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43 };
99 ex_pnp_wakeup (void * dummy)
104 printf("ex_pnp_wakeup()\n");
106 outb(EX_PNP_WAKE, 0);
107 outb(EX_PNP_WAKE, 0);
108 for (tmp = 0; tmp < 32; tmp++) {
109 outb(EX_PNP_WAKE, ex_pnp_wake_seq[tmp]);
115 * Non-destructive identify.
118 ex_isa_identify (driver_t *driver, device_t parent)
128 printf("ex_isa_identify()\n");
130 for (ioport = 0x200; ioport < 0x3a0; ioport += 0x10) {
132 /* No board found at address */
133 if (!look_for_card(ioport)) {
138 printf("ex: Found card at 0x%03x!\n", ioport);
140 /* Board in PnP mode */
141 if (eeprom_read(ioport, EE_W0) & EE_W0_PNP) {
142 /* Reset the card. */
143 outb(ioport + CMD_REG, Reset_CMD);
146 printf("ex: card at 0x%03x in PnP mode!\n", ioport);
150 bzero(enaddr, sizeof(enaddr));
152 /* Reset the card. */
153 outb(ioport + CMD_REG, Reset_CMD);
156 ex_get_address(ioport, enaddr);
157 tmp = eeprom_read(ioport, EE_W1) & EE_W1_INT_SEL;
159 /* work out which set of irq <-> internal tables to use */
160 if (ex_card_type(enaddr) == CARD_TYPE_EX_10_PLUS) {
161 irq = plus_ee2irqmap[tmp];
162 desc = "Intel Pro/10+";
164 irq = ee2irqmap[tmp];
165 desc = "Intel Pro/10";
168 child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "ex", -1);
169 device_set_desc_copy(child, desc);
170 device_set_driver(child, driver);
171 bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
172 bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, EX_IOSIZE);
175 printf("ex: Adding board at 0x%03x, irq %d\n", ioport, irq);
182 ex_isa_probe(device_t dev)
192 /* Check isapnp ids */
193 error = ISA_PNP_PROBE(device_get_parent(dev), dev, ex_ids);
195 /* If the card had a PnP ID that didn't match any we know about */
196 if (error == ENXIO) {
200 /* If we had some other problem. */
201 if (!(error == 0 || error == ENOENT)) {
205 iobase = bus_get_resource_start(dev, SYS_RES_IOPORT, 0);
207 printf("ex: no iobase?\n");
211 if (!look_for_card(iobase)) {
212 printf("ex: no card found at 0x%03x\n", iobase);
217 printf("ex: ex_isa_probe() found card at 0x%03x\n", iobase);
222 outb(iobase + CMD_REG, Reset_CMD);
225 ex_get_address(iobase, enaddr);
227 /* work out which set of irq <-> internal tables to use */
228 if (ex_card_type(enaddr) == CARD_TYPE_EX_10_PLUS) {
229 irq2ee = plus_irq2eemap;
230 ee2irq = plus_ee2irqmap;
236 tmp = eeprom_read(iobase, EE_W1) & EE_W1_INT_SEL;
237 irq = bus_get_resource_start(dev, SYS_RES_IRQ, 0);
240 /* This will happen if board is in PnP mode. */
241 if (ee2irq[tmp] != irq) {
242 printf("ex: WARNING: board's EEPROM is configured"
243 " for IRQ %d, using %d\n",
248 bus_set_resource(dev, SYS_RES_IRQ, 0, irq, 1);
252 printf("ex: invalid IRQ.\n");
260 ex_isa_attach(device_t dev)
262 struct ex_softc * sc = device_get_softc(dev);
270 if ((error = ex_alloc_resources(dev)) != 0) {
271 device_printf(dev, "ex_alloc_resources() failed!\n");
276 * Fill in several fields of the softc structure:
277 * - I/O base address.
278 * - Hardware Ethernet address.
279 * - IRQ number (if not supplied in config file, read it from EEPROM).
282 sc->iobase = rman_get_start(sc->ioport);
283 sc->irq_no = rman_get_start(sc->irq);
285 ex_get_address(sc->iobase, sc->arpcom.ac_enaddr);
287 temp = eeprom_read(sc->iobase, EE_W0);
288 device_printf(sc->dev, "%s config, %s bus, ",
289 (temp & EE_W0_PNP) ? "PnP" : "Manual",
290 (temp & EE_W0_BUS16) ? "16-bit" : "8-bit");
292 temp = eeprom_read(sc->iobase, EE_W6);
293 printf("board id 0x%03x, stepping 0x%01x\n",
294 (temp & EE_W6_BOARD_MASK) >> EE_W6_BOARD_SHIFT,
295 temp & EE_W6_STEP_MASK);
297 if ((error = ex_attach(dev)) != 0) {
298 device_printf(dev, "ex_attach() failed!\n");
302 error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET,
303 ex_intr, (void *)sc, &sc->ih);
305 device_printf(dev, "bus_setup_intr() failed!\n");
311 ex_release_resources(dev);