Add the DragonFly cvs id and perform general cleanups on cvs/rcs/sccs ids. Most
[dragonfly.git] / sys / dev / netif / snc / if_snc.c
1 /*
2  * Copyright (c) 1995, David Greenman
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice unmodified, this list of conditions, and the following
10  *    disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  * $FreeBSD: src/sys/dev/snc/if_snc.c,v 1.2.2.1 2000/10/21 03:30:03 nyan Exp $
28  * $DragonFly: src/sys/dev/netif/snc/Attic/if_snc.c,v 1.2 2003/06/17 04:28:29 dillon Exp $
29  */
30
31 /*
32  *      National Semiconductor  DP8393X SONIC Driver
33  *
34  *      This is the bus independent attachment on FreeBSD 4.x
35  *              written by Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
36  */
37
38 #include <sys/param.h>
39 #include <sys/systm.h>
40 #include <sys/sockio.h>
41 #include <sys/mbuf.h>
42 #include <sys/socket.h>
43 #include <sys/syslog.h>
44
45 #include <sys/module.h>
46 #include <sys/bus.h>
47 #include <machine/bus.h>
48 #include <sys/rman.h>
49 #include <machine/resource.h>
50
51 #include <net/ethernet.h>
52 #include <net/if.h>
53 #include <net/if_arp.h>
54 #include <net/if_media.h>
55 #include <net/if_dl.h>
56 #include <net/if_mib.h>
57
58 #include <net/bpf.h>
59 #include "opt_bdg.h"
60 #ifdef BRIDGE
61 #include <net/bridge.h>
62 #endif
63
64 #include <dev/snc/dp83932reg.h>
65 #include <dev/snc/dp83932var.h>
66 #include <dev/snc/dp83932subr.h>
67 #include <dev/snc/if_sncreg.h>
68 #include <dev/snc/if_sncvar.h>
69
70 /* devclass for "snc" */
71 devclass_t snc_devclass;
72
73 /****************************************************************
74   Resource management functions
75  ****************************************************************/
76
77 /*
78  * Allocate a port resource with the given resource id.
79  */
80 int
81 snc_alloc_port(dev, rid)
82         device_t dev;
83         int rid;
84 {
85         struct snc_softc *sc = device_get_softc(dev);
86         struct resource *res;
87
88         res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
89                                  0ul, ~0ul, SNEC_NREGS, RF_ACTIVE);
90         if (res) {
91                 sc->ioport = res;
92                 sc->ioport_rid = rid;
93                 sc->sc_iot = rman_get_bustag(res);
94                 sc->sc_ioh = rman_get_bushandle(res);
95                 return (0);
96         } else {
97                 device_printf(dev, "can't assign port\n");
98                 return (ENOENT);
99         }
100 }
101
102 /*
103  * Allocate a memory resource with the given resource id.
104  */
105 int
106 snc_alloc_memory(dev, rid)
107         device_t dev;
108         int rid;
109 {
110         struct snc_softc *sc = device_get_softc(dev);
111         struct resource *res;
112
113         res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
114                                  0ul, ~0ul, SNEC_NMEMS, RF_ACTIVE);
115         if (res) {
116                 sc->iomem = res;
117                 sc->iomem_rid = rid;
118                 sc->sc_memt = rman_get_bustag(res);
119                 sc->sc_memh = rman_get_bushandle(res);
120                 return (0);
121         } else {
122                 device_printf(dev, "can't assign memory\n");
123                 return (ENOENT);
124         }
125 }
126
127 /*
128  * Allocate an irq resource with the given resource id.
129  */
130 int
131 snc_alloc_irq(dev, rid, flags)
132         device_t dev;
133         int rid;
134         int flags;
135 {
136         struct snc_softc *sc = device_get_softc(dev);
137         struct resource *res;
138
139         res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
140                                  0ul, ~0ul, 1, (RF_ACTIVE | flags));
141         if (res) {
142                 sc->irq = res;
143                 sc->irq_rid = rid;
144                 return (0);
145         } else {
146                 device_printf(dev, "can't assign irq\n");
147                 return (ENOENT);
148         }
149 }
150
151 /*
152  * Release all resources
153  */
154 void
155 snc_release_resources(dev)
156         device_t dev;
157 {
158         struct snc_softc *sc = device_get_softc(dev);
159
160         if (sc->ioport) {
161                 bus_release_resource(dev, SYS_RES_IOPORT,
162                                      sc->ioport_rid, sc->ioport);
163                 sc->ioport = 0;
164         }
165         if (sc->iomem) {
166                 bus_release_resource(dev, SYS_RES_MEMORY,
167                                      sc->iomem_rid, sc->iomem);
168                 sc->iomem = 0;
169         }
170         if (sc->irq) {
171                 bus_release_resource(dev, SYS_RES_IRQ,
172                                      sc->irq_rid, sc->irq);
173                 sc->irq = 0;
174         }
175 }
176
177 /****************************************************************
178   Probe routine
179  ****************************************************************/
180
181 int
182 snc_probe(dev, type)
183      device_t dev;
184      int type;
185 {
186         struct snc_softc *sc = device_get_softc(dev);
187
188         return snc_nec16_detectsubr(sc->sc_iot, sc->sc_ioh,
189                                     sc->sc_memt, sc->sc_memh,
190                                     rman_get_start(sc->irq),
191                                     rman_get_start(sc->iomem),
192                                     type);
193 }
194
195 /****************************************************************
196   Attach routine
197  ****************************************************************/
198
199 int
200 snc_attach(dev)
201         device_t dev;
202 {
203         struct snc_softc *sc = device_get_softc(dev);
204         u_int8_t myea[ETHER_ADDR_LEN];
205
206         if (snc_nec16_register_irq(sc, rman_get_start(sc->irq)) == 0 || 
207             snc_nec16_register_mem(sc, rman_get_start(sc->iomem)) == 0) {
208                 snc_release_resources(dev);
209                 return(ENOENT);
210         }
211
212         snc_nec16_get_enaddr(sc->sc_iot, sc->sc_ioh, myea);
213         device_printf(dev, "%s Ethernet\n", snc_nec16_detect_type(myea));
214
215         sc->sc_dev = dev;
216
217         sc->sncr_dcr = DCR_SYNC | DCR_WAIT0 |
218             DCR_DMABLOCK | DCR_RFT16 | DCR_TFT28;
219         sc->sncr_dcr2 = 0;      /* XXX */
220         sc->bitmode = 0;        /* 16 bit card */
221
222         sc->sc_nic_put = snc_nec16_nic_put;
223         sc->sc_nic_get = snc_nec16_nic_get;
224         sc->sc_writetodesc = snc_nec16_writetodesc;
225         sc->sc_readfromdesc = snc_nec16_readfromdesc;
226         sc->sc_copytobuf = snc_nec16_copytobuf;
227         sc->sc_copyfrombuf = snc_nec16_copyfrombuf;
228         sc->sc_zerobuf = snc_nec16_zerobuf;
229
230         /* sncsetup returns 1 if something fails */
231         if (sncsetup(sc, myea)) {
232                 snc_release_resources(dev);
233                 return(ENOENT);
234         }
235
236         sncconfig(sc, NULL, 0, 0, myea);
237
238         return 0;
239 }
240
241 /****************************************************************
242   Shutdown routine
243  ****************************************************************/
244
245 void
246 snc_shutdown(dev)
247         device_t dev;
248 {
249         sncshutdown(device_get_softc(dev));
250 }