[dragonfly.git] / sys / dev / netif / sf / if_sfreg.h

/*
 * Copyright (c) 1997, 1998, 1999
 *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD: src/sys/pci/if_sfreg.h,v 1.6.2.1 2001/08/16 20:35:04 wpaul Exp $
 * $DragonFly: src/sys/dev/netif/sf/if_sfreg.h,v 1.5 2006/08/01 18:08:24 swildner Exp $
 */

/*
 * Registers for the Adaptec AIC-6915 Starfire. The Starfire has a 512K
 * register space. These registers can be accessed in the following way:
 * - PCI config registers are always accessible through PCI config space
 * - Full 512K space mapped into memory using PCI memory mapped access
 * - 256-byte I/O space mapped through PCI I/O access
 * - Full 512K space mapped through indirect I/O using PCI I/O access
 * It's possible to use either memory mapped mode or I/O mode to access
 * the registers, but memory mapped is usually the easiest. All registers
 * are 32 bits wide and must be accessed using 32-bit operations.
 */

/*
 * AIC-6915 subsystem IDs. Adaptec uses the subsystem ID to identify
 * the exact kind of NIC on which the ASIC is mounted. Currently there
 * are six different variations. Note: the Adaptec manual lists code 0x28
 * for two different NICs: the 62044 and the 69011/TX. This is a typo:
 * the code for the 62044 is really 0x18.
 *
 * Note that there also appears to be an 0x19 code for a newer rev
 * 62044 card.
 */
#define AD_SUBSYSID_62011_REV0  0x0008  /* single port 10/100baseTX 64-bit */
#define AD_SUBSYSID_62011_REV1  0x0009  /* single port 10/100baseTX 64-bit */
#define AD_SUBSYSID_62022       0x0010  /* dual port 10/100baseTX 64-bit */
#define AD_SUBSYSID_62044_REV0  0x0018  /* quad port 10/100baseTX 64-bit */
#define AD_SUBSYSID_62044_REV1  0x0019  /* quad port 10/100baseTX 64-bit */
#define AD_SUBSYSID_62020       0x0020  /* single port 10/100baseFX 64-bit */
#define AD_SUBSYSID_69011       0x0028  /* single port 10/100baseTX 32-bit */

/*
 * Starfire internal register space map. The entire register space
 * is available using PCI memory mapped mode. The SF_RMAP_INTREG
 * space is available using PCI I/O mode. The entire space can be
 * accessed using indirect I/O using the indirect I/O addr and
 * indirect I/O data registers located within the SF_RMAP_INTREG space.
 */
#define SF_RMAP_ROMADDR_BASE    0x00000 /* Expansion ROM space */
#define SF_RMAP_ROMADDR_MAX     0x3FFFF

#define SF_RMAP_EXGPIO_BASE     0x40000 /* External general purpose regs */
#define SF_RMAP_EXGPIO_MAX      0x3FFFF

#define SF_RMAP_INTREG_BASE     0x50000 /* Internal functional registers */
#define SF_RMAP_INTREG_MAX      0x500FF
#define SF_RMAP_GENREG_BASE     0x50100 /* General purpose registers */
#define SF_RMAP_GENREG_MAX      0x5FFFF

#define SF_RMAP_FIFO_BASE       0x60000
#define SF_RMAP_FIFO_MAX        0x6FFFF

#define SF_RMAP_STS_BASE        0x70000
#define SF_RMAP_STS_MAX         0x70083

#define SF_RMAP_RSVD_BASE       0x70084
#define SF_RMAP_RSVD_MAX        0x7FFFF

/*
 * PCI config header registers, 0x0000 to 0x003F
 */
#define SF_PCI_VENDOR_ID        0x0000
#define SF_PCI_DEVICE_ID        0x0002
#define SF_PCI_COMMAND          0x0004
#define SF_PCI_STATUS           0x0006
#define SF_PCI_REVID            0x0008
#define SF_PCI_CLASSCODE        0x0009
#define SF_PCI_CACHELEN         0x000C
#define SF_PCI_LATENCY_TIMER    0x000D
#define SF_PCI_HEADER_TYPE      0x000E
#define SF_PCI_LOMEM            0x0010
#define SF_PCI_LOIO             0x0014
#define SF_PCI_SUBVEN_ID        0x002C
#define SF_PCI_SYBSYS_ID        0x002E
#define SF_PCI_BIOSROM          0x0030
#define SF_PCI_INTLINE          0x003C
#define SF_PCI_INTPIN           0x003D
#define SF_PCI_MINGNT           0x003E
#define SF_PCI_MINLAT           0x003F

/*
 * PCI registers, 0x0040 to 0x006F
 */
#define SF_PCI_DEVCFG           0x0040
#define SF_BACCTL               0x0044
#define SF_PCI_MON1             0x0048
#define SF_PCI_MON2             0x004C
#define SF_PCI_CAPID            0x0050 /* 8 bits */
#define SF_PCI_NEXTPTR          0x0051 /* 8 bits */
#define SF_PCI_PWRMGMTCAP       0x0052 /* 16 bits */
#define SF_PCI_PWRMGMTCTRL      0x0054 /* 16 bits */
#define SF_PCI_PME_EVENT        0x0058
#define SF_PCI_EECTL            0x0060
#define SF_PCI_COMPLIANCE       0x0064
#define SF_INDIRECTIO_ADDR      0x0068
#define SF_INDIRECTIO_DATA      0x006C

#define SF_PCIDEVCFG_RESET      0x00000001
#define SF_PCIDEVCFG_FORCE64    0x00000002
#define SF_PCIDEVCFG_SYSTEM64   0x00000004
#define SF_PCIDEVCFG_RSVD0      0x00000008
#define SF_PCIDEVCFG_INCR_INB   0x00000010
#define SF_PCIDEVCFG_ABTONPERR  0x00000020
#define SF_PCIDEVCFG_STPONPERR  0x00000040
#define SF_PCIDEVCFG_MR_ENB     0x00000080
#define SF_PCIDEVCFG_FIFOTHR    0x00000F00
#define SF_PCIDEVCFG_STPONCA    0x00001000
#define SF_PCIDEVCFG_PCIMEN     0x00002000      /* enable PCI bus master */
#define SF_PCIDEVCFG_LATSTP     0x00004000
#define SF_PCIDEVCFG_BYTE_ENB   0x00008000
#define SF_PCIDEVCFG_EECSWIDTH  0x00070000
#define SF_PCIDEVCFG_STPMWCA    0x00080000
#define SF_PCIDEVCFG_REGCSWIDTH 0x00700000
#define SF_PCIDEVCFG_INTR_ENB   0x00800000
#define SF_PCIDEVCFG_DPR_ENB    0x01000000
#define SF_PCIDEVCFG_RSVD1      0x02000000
#define SF_PCIDEVCFG_RSVD2      0x04000000
#define SF_PCIDEVCFG_STA_ENB    0x08000000
#define SF_PCIDEVCFG_RTA_ENB    0x10000000
#define SF_PCIDEVCFG_RMA_ENB    0x20000000
#define SF_PCIDEVCFG_SSE_ENB    0x40000000
#define SF_PCIDEVCFG_DPE_ENB    0x80000000

#define SF_BACCTL_BACDMA_ENB    0x00000001
#define SF_BACCTL_PREFER_RXDMA  0x00000002
#define SF_BACCTL_PREFER_TXDMA  0x00000004
#define SF_BACCTL_SINGLE_DMA    0x00000008
#define SF_BACCTL_SWAPMODE_DATA 0x00000030
#define SF_BACCTL_SWAPMODE_DESC 0x000000C0

#define SF_SWAPMODE_LE          0x00000000
#define SF_SWAPMODE_BE          0x00000010

#define SF_PSTATE_MASK          0x0003
#define SF_PSTATE_D0            0x0000
#define SF_PSTATE_D1            0x0001
#define SF_PSTATE_D2            0x0002
#define SF_PSTATE_D3            0x0003
#define SF_PME_EN               0x0010
#define SF_PME_STATUS           0x8000


/*
 * Ethernet registers 0x0070 to 0x00FF
 */
#define SF_GEN_ETH_CTL          0x0070
#define SF_TIMER_CTL            0x0074
#define SF_CURTIME              0x0078
#define SF_ISR                  0x0080
#define SF_ISR_SHADOW           0x0084
#define SF_IMR                  0x0088
#define SF_GPIO                 0x008C
#define SF_TXDQ_CTL             0x0090
#define SF_TXDQ_ADDR_HIPRIO     0x0094
#define SF_TXDQ_ADDR_LOPRIO     0x0098
#define SF_TXDQ_ADDR_HIADDR     0x009C
#define SF_TXDQ_PRODIDX         0x00A0
#define SF_TXDQ_CONSIDX         0x00A4
#define SF_TXDMA_STS1           0x00A8
#define SF_TXDMA_STS2           0x00AC
#define SF_TX_FRAMCTL           0x00B0
#define SF_TXCQ_ADDR_HI         0x00B4
#define SF_TXCQ_CTL             0x00B8
#define SF_RXCQ_CTL_1           0x00BC
#define SF_RXCQ_CTL_2           0x00C0
#define SF_CQ_CONSIDX           0x00C4
#define SF_CQ_PRODIDX           0x00C8
#define SF_CQ_RXQ2              0x00CC
#define SF_RXDMA_CTL            0x00D0
#define SF_RXDQ_CTL_1           0x00D4
#define SF_RXDQ_CTL_2           0x00D8
#define SF_RXDQ_ADDR_HIADDR     0x00DC
#define SF_RXDQ_ADDR_Q1         0x00E0
#define SF_RXDQ_ADDR_Q2         0x00E4
#define SF_RXDQ_PTR_Q1          0x00E8
#define SF_RXDQ_PTR_Q2          0x00EC
#define SF_RXDMA_STS            0x00F0
#define SF_RXFILT               0x00F4
#define SF_RX_FRAMETEST_OUT     0x00F8

/* Ethernet control register */
#define SF_ETHCTL_RX_ENB        0x00000001
#define SF_ETHCTL_TX_ENB        0x00000002
#define SF_ETHCTL_RXDMA_ENB     0x00000004
#define SF_ETHCTL_TXDMA_ENB     0x00000008
#define SF_ETHCTL_RXGFP_ENB     0x00000010
#define SF_ETHCTL_TXGFP_ENB     0x00000020
#define SF_ETHCTL_SOFTINTR      0x00000800

/* Timer control register */
#define SF_TIMER_IMASK_INTERVAL 0x0000001F
#define SF_TIMER_IMASK_MODE     0x00000060
#define SF_TIMER_SMALLFRAME_BYP 0x00000100
#define SF_TIMER_SMALLRX_FRAME  0x00000600
#define SF_TIMER_TIMES_TEN      0x00000800
#define SF_TIMER_RXHIPRIO_BYP   0x00001000
#define SF_TIMER_TX_DMADONE_DLY 0x00002000
#define SF_TIMER_TX_QDONE_DLY   0x00004000
#define SF_TIMER_TX_FRDONE_DLY  0x00008000
#define SF_TIMER_GENTIMER       0x00FF0000
#define SF_TIMER_ONESHOT        0x01000000
#define SF_TIMER_GENTIMER_RES   0x02000000
#define SF_TIMER_TIMEST_RES     0x04000000
#define SF_TIMER_RXQ2DONE_DLY   0x10000000
#define SF_TIMER_EARLYRX2_DLY   0x20000000
#define SF_TIMER_RXQ1DONE_DLY   0x40000000
#define SF_TIMER_EARLYRX1_DLY   0x80000000

/* Interrupt status register */
#define SF_ISR_PCIINT_ASSERTED  0x00000001
#define SF_ISR_GFP_TX           0x00000002
#define SF_ISR_GFP_RX           0x00000004
#define SF_ISR_TX_BADID_HIPRIO  0x00000008
#define SF_ISR_TX_BADID_LOPRIO  0x00000010
#define SF_ISR_NO_TX_CSUM       0x00000020
#define SF_ISR_RXDQ2_NOBUFS     0x00000040
#define SF_ISR_RXGFP_NORESP     0x00000080
#define SF_ISR_RXDQ1_DMADONE    0x00000100
#define SF_ISR_RXDQ2_DMADONE    0x00000200
#define SF_ISR_RXDQ1_EARLY      0x00000400
#define SF_ISR_RXDQ2_EARLY      0x00000800
#define SF_ISR_TX_QUEUEDONE     0x00001000
#define SF_ISR_TX_DMADONE       0x00002000
#define SF_ISR_TX_TXDONE        0x00004000
#define SF_ISR_NORMALINTR       0x00008000
#define SF_ISR_RXDQ1_NOBUFS     0x00010000
#define SF_ISR_RXCQ2_NOBUFS     0x00020000
#define SF_ISR_TX_LOFIFO        0x00040000
#define SF_ISR_DMAERR           0x00080000
#define SF_ISR_PCIINT           0x00100000
#define SF_ISR_TXCQ_NOBUFS      0x00200000
#define SF_ISR_RXCQ1_NOBUFS     0x00400000
#define SF_ISR_SOFTINTR         0x00800000
#define SF_ISR_GENTIMER         0x01000000
#define SF_ISR_ABNORMALINTR     0x02000000
#define SF_ISR_RSVD0            0x04000000
#define SF_ISR_STATSOFLOW       0x08000000
#define SF_ISR_GPIO             0xF0000000

/*
 * Shadow interrupt status register. Unlike the normal IRQ register,
 * reading bits here does not automatically cause them to reset.
 */
#define SF_SISR_PCIINT_ASSERTED 0x00000001
#define SF_SISR_GFP_TX          0x00000002
#define SF_SISR_GFP_RX          0x00000004
#define SF_SISR_TX_BADID_HIPRIO 0x00000008
#define SF_SISR_TX_BADID_LOPRIO 0x00000010
#define SF_SISR_NO_TX_CSUM      0x00000020
#define SF_SISR_RXDQ2_NOBUFS    0x00000040
#define SF_SISR_RXGFP_NORESP    0x00000080
#define SF_SISR_RXDQ1_DMADONE   0x00000100
#define SF_SISR_RXDQ2_DMADONE   0x00000200
#define SF_SISR_RXDQ1_EARLY     0x00000400
#define SF_SISR_RXDQ2_EARLY     0x00000800
#define SF_SISR_TX_QUEUEDONE    0x00001000
#define SF_SISR_TX_DMADONE      0x00002000
#define SF_SISR_TX_TXDONE       0x00004000
#define SF_SISR_NORMALINTR      0x00008000
#define SF_SISR_RXDQ1_NOBUFS    0x00010000
#define SF_SISR_RXCQ2_NOBUFS    0x00020000
#define SF_SISR_TX_LOFIFO       0x00040000
#define SF_SISR_DMAERR          0x00080000
#define SF_SISR_PCIINT          0x00100000
#define SF_SISR_TXCQ_NOBUFS     0x00200000
#define SF_SISR_RXCQ1_NOBUFS    0x00400000
#define SF_SISR_SOFTINTR        0x00800000
#define SF_SISR_GENTIMER        0x01000000
#define SF_SISR_ABNORMALINTR    0x02000000
#define SF_SISR_RSVD0           0x04000000
#define SF_SISR_STATSOFLOW      0x08000000
#define SF_SISR_GPIO            0xF0000000

/* Interrupt mask register */
#define SF_IMR_PCIINT_ASSERTED  0x00000001
#define SF_IMR_GFP_TX           0x00000002
#define SF_IMR_GFP_RX           0x00000004
#define SF_IMR_TX_BADID_HIPRIO  0x00000008
#define SF_IMR_TX_BADID_LOPRIO  0x00000010
#define SF_IMR_NO_TX_CSUM       0x00000020
#define SF_IMR_RXDQ2_NOBUFS     0x00000040
#define SF_IMR_RXGFP_NORESP     0x00000080
#define SF_IMR_RXDQ1_DMADONE    0x00000100
#define SF_IMR_RXDQ2_DMADONE    0x00000200
#define SF_IMR_RXDQ1_EARLY      0x00000400
#define SF_IMR_RXDQ2_EARLY      0x00000800
#define SF_IMR_TX_QUEUEDONE     0x00001000
#define SF_IMR_TX_DMADONE       0x00002000
#define SF_IMR_TX_TXDONE        0x00004000
#define SF_IMR_NORMALINTR       0x00008000
#define SF_IMR_RXDQ1_NOBUFS     0x00010000
#define SF_IMR_RXCQ2_NOBUFS     0x00020000
#define SF_IMR_TX_LOFIFO        0x00040000
#define SF_IMR_DMAERR           0x00080000
#define SF_IMR_PCIINT           0x00100000
#define SF_IMR_TXCQ_NOBUFS      0x00200000
#define SF_IMR_RXCQ1_NOBUFS     0x00400000
#define SF_IMR_SOFTINTR         0x00800000
#define SF_IMR_GENTIMER         0x01000000
#define SF_IMR_ABNORMALINTR     0x02000000
#define SF_IMR_RSVD0            0x04000000
#define SF_IMR_STATSOFLOW       0x08000000
#define SF_IMR_GPIO             0xF0000000

#define SF_INTRS        \
        (SF_IMR_RXDQ2_NOBUFS|SF_IMR_RXDQ1_DMADONE|SF_IMR_RXDQ2_DMADONE| \
         SF_IMR_TX_TXDONE|SF_IMR_RXDQ1_NOBUFS|SF_IMR_RXDQ2_DMADONE|     \
         SF_IMR_NORMALINTR|SF_IMR_ABNORMALINTR|SF_IMR_TXCQ_NOBUFS|      \
         SF_IMR_RXCQ1_NOBUFS|SF_IMR_RXCQ2_NOBUFS|SF_IMR_STATSOFLOW|     \
         SF_IMR_TX_LOFIFO)

/* TX descriptor queue control registers */
#define SF_TXDQCTL_DESCTYPE     0x00000007
#define SF_TXDQCTL_NODMACMP     0x00000008
#define SF_TXDQCTL_MINSPACE     0x00000070
#define SF_TXDQCTL_64BITADDR    0x00000080
#define SF_TXDQCTL_BURSTLEN     0x00003F00
#define SF_TXDQCTL_SKIPLEN      0x001F0000
#define SF_TXDQCTL_HIPRIOTHRESH 0xFF000000

#define SF_TXBUFDESC_TYPE0      0x00000000
#define SF_TXBUFDESC_TYPE1      0x00000001
#define SF_TXBUFDESC_TYPE2      0x00000002
#define SF_TXBUFDESC_TYPE3      0x00000003
#define SF_TXBUFDESC_TYPE4      0x00000004

#define SF_TXMINSPACE_UNLIMIT   0x00000000
#define SF_TXMINSPACE_32BYTES   0x00000010
#define SF_TXMINSPACE_64BYTES   0x00000020
#define SF_TXMINSPACE_128BYTES  0x00000030
#define SF_TXMINSPACE_256BYTES  0x00000040

#define SF_TXSKIPLEN_0BYTES     0x00000000
#define SF_TXSKIPLEN_8BYTES     0x00010000
#define SF_TXSKIPLEN_16BYTES    0x00020000
#define SF_TXSKIPLEN_24BYTES    0x00030000
#define SF_TXSKIPLEN_32BYTES    0x00040000

/* TX frame control register */
#define SF_TXFRMCTL_TXTHRESH    0x000000FF
#define SF_TXFRMCTL_CPLAFTERTX  0x00000100
#define SF_TXFRMCRL_DEBUG       0x0000FE00
#define SF_TXFRMCTL_STATUS      0x01FF0000
#define SF_TXFRMCTL_MAC_TXIF    0xFE000000

/* TX completion queue control register */
#define SF_TXCQ_THRESH          0x0000000F
#define SF_TXCQ_COMMON          0x00000010
#define SF_TXCQ_SIZE            0x00000020
#define SF_TXCQ_WRITEENB        0x00000040
#define SF_TXCQ_USE_64BIT       0x00000080
#define SF_TXCQ_ADDR            0xFFFFFF00

/* RX completion queue control register */
#define SF_RXCQ_THRESH          0x0000000F
#define SF_RXCQ_TYPE            0x00000030
#define SF_RXCQ_WRITEENB        0x00000040
#define SF_RXCQ_USE_64BIT       0x00000080
#define SF_RXCQ_ADDR            0xFFFFFF00

#define SF_RXCQTYPE_0           0x00000000
#define SF_RXCQTYPE_1           0x00000010
#define SF_RXCQTYPE_2           0x00000020
#define SF_RXCQTYPE_3           0x00000030

/* TX descriptor queue producer index register */
#define SF_TXDQ_PRODIDX_LOPRIO  0x000007FF
#define SF_TXDQ_PRODIDX_HIPRIO  0x07FF0000

/* TX descriptor queue consumer index register */
#define SF_TXDQ_CONSIDX_LOPRIO  0x000007FF
#define SF_TXDQ_CONSIDX_HIPRIO  0x07FF0000

/* Completion queue consumer index register */
#define SF_CQ_CONSIDX_RXQ1      0x000003FF
#define SF_CQ_CONSIDX_RXTHRMODE 0x00008000
#define SF_CQ_CONSIDX_TXQ       0x03FF0000
#define SF_CQ_CONSIDX_TXTHRMODE 0x80000000

/* Completion queue producer index register */
#define SF_CQ_PRODIDX_RXQ1      0x000003FF
#define SF_CQ_PRODIDX_TXQ       0x03FF0000

/* RX completion queue 2 consumer/producer index register */
#define SF_CQ_RXQ2_CONSIDX      0x000003FF
#define SF_CQ_RXQ2_RXTHRMODE    0x00008000
#define SF_CQ_RXQ2_PRODIDX      0x03FF0000

#define SF_CQ_RXTHRMODE_INT_ON  0x00008000
#define SF_CQ_RXTHRMODE_INT_OFF 0x00000000
#define SF_CQ_TXTHRMODE_INT_ON  0x80000000
#define SF_CQ_TXTHRMODE_INT_OFF 0x00000000

#define SF_IDX_LO(x)            ((x) & 0x000007FF)
#define SF_IDX_HI(x)            (((x) >> 16) & 0x000007FF)

/* RX DMA control register */
#define SF_RXDMA_BURSTSIZE      0x0000007F
#define SF_RXDMA_FPTESTMODE     0x00000080
#define SF_RXDMA_HIPRIOTHRESH   0x00000F00
#define SF_RXDMA_RXEARLYTHRESH  0x0001F000
#define SF_RXDMA_DMACRC         0x00040000
#define SF_RXDMA_USEBKUPQUEUE   0x00080000
#define SF_RXDMA_QUEUEMODE      0x00700000
#define SF_RXDMA_RXCQ2_ON       0x00800000
#define SF_RXDMA_CSUMMODE       0x03000000
#define SF_RXDMA_DMAPAUSEPKTS   0x04000000
#define SF_RXDMA_DMACTLPKTS     0x08000000
#define SF_RXDMA_DMACRXERRPKTS  0x10000000
#define SF_RXDMA_DMABADPKTS     0x20000000
#define SF_RXDMA_DMARUNTS       0x40000000
#define SF_RXDMA_REPORTBADPKTS  0x80000000

#define SF_RXDQMODE_Q1ONLY      0x00100000
#define SF_RXDQMODE_Q2_ON_FP    0x00200000
#define SF_RXDQMODE_Q2_ON_SHORT 0x00300000
#define SF_RXDQMODE_Q2_ON_PRIO  0x00400000
#define SF_RXDQMODE_SPLITHDR    0x00500000

#define SF_RXCSUMMODE_IGNORE    0x00000000
#define SF_RXCSUMMODE_REJECT_BAD_TCP    0x01000000
#define SF_RXCSUMMODE_REJECT_BAD_TCPUDP 0x02000000
#define SF_RXCSUMMODE_RSVD      0x03000000

/* RX descriptor queue control registers */
#define SF_RXDQCTL_MINDESCTHR   0x0000007F
#define SF_RXDQCTL_Q1_WE        0x00000080
#define SF_RXDQCTL_DESCSPACE    0x00000700
#define SF_RXDQCTL_64BITDADDR   0x00000800
#define SF_RXDQCTL_64BITBADDR   0x00001000
#define SF_RXDQCTL_VARIABLE     0x00002000
#define SF_RXDQCTL_ENTRIES      0x00004000
#define SF_RXDQCTL_PREFETCH     0x00008000
#define SF_RXDQCTL_BUFLEN       0xFFFF0000

#define SF_DESCSPACE_4BYTES     0x00000000
#define SF_DESCSPACE_8BYTES     0x00000100
#define SF_DESCSPACE_16BYTES    0x00000200
#define SF_DESCSPACE_32BYTES    0x00000300
#define SF_DESCSPACE_64BYTES    0x00000400
#define SF_DESCSPACE_128_BYTES  0x00000500

/* RX buffer consumer/producer index registers */
#define SF_RXDQ_PRODIDX         0x000007FF
#define SF_RXDQ_CONSIDX         0x07FF0000

/* RX filter control register */
#define SF_RXFILT_PROMISC       0x00000001
#define SF_RXFILT_ALLMULTI      0x00000002
#define SF_RXFILT_BROAD         0x00000004
#define SF_RXFILT_HASHPRIO      0x00000008
#define SF_RXFILT_HASHMODE      0x00000030
#define SF_RXFILT_PERFMODE      0x000000C0
#define SF_RXFILT_VLANMODE      0x00000300
#define SF_RXFILT_WAKEMODE      0x00000C00
#define SF_RXFILT_MULTI_NOBROAD 0x00001000
#define SF_RXFILT_MIN_VLANPRIO  0x0000E000
#define SF_RXFILT_PEFECTPRIO    0xFFFF0000

/* Hash filtering mode */
#define SF_HASHMODE_OFF         0x00000000
#define SF_HASHMODE_WITHVLAN    0x00000010
#define SF_HASHMODE_ANYVLAN     0x00000020
#define SF_HASHMODE_ANY         0x00000030

/* Perfect filtering mode */
#define SF_PERFMODE_OFF         0x00000000
#define SF_PERFMODE_NORMAL      0x00000040
#define SF_PERFMODE_INVERSE     0x00000080
#define SF_PERFMODE_VLAN        0x000000C0

/* VLAN mode */
#define SF_VLANMODE_OFF         0x00000000
#define SF_VLANMODE_NOSTRIP     0x00000100
#define SF_VLANMODE_STRIP       0x00000200
#define SF_VLANMODE_RSVD        0x00000300

/* Wakeup mode */
#define SF_WAKEMODE_OFF         0x00000000
#define SF_WAKEMODE_FILTER      0x00000400
#define SF_WAKEMODE_FP          0x00000800
#define SF_WAKEMODE_HIPRIO      0x00000C00

/*
 * Extra PCI registers 0x0100 to 0x0FFF
 */
#define SF_PCI_TARGSTAT         0x0100
#define SF_PCI_MASTSTAT1        0x0104
#define SF_PCI_MASTSTAT2        0x0108
#define SF_PCI_DMAHOSTADDR_LO   0x010C
#define SF_BAC_DMADIAG0         0x0110
#define SF_BAC_DMADIAG1         0x0114
#define SF_BAC_DMADIAG2         0x0118
#define SF_BAC_DMADIAG3         0x011C
#define SF_PAR0                 0x0120
#define SF_PAR1                 0x0124
#define SF_PCICB_FUNCEVENT      0x0130
#define SF_PCICB_FUNCEVENT_MASK 0x0134
#define SF_PCICB_FUNCSTATE      0x0138
#define SF_PCICB_FUNCFORCE      0x013C

/*
 * Serial EEPROM registers 0x1000 to 0x1FFF
 * Presumeably the EEPROM is mapped into this 8K window.
 */
#define SF_EEADDR_BASE          0x1000
#define SF_EEADDR_MAX           0x1FFF

#define SF_EE_NODEADDR          14

/*
 * MII registers registers 0x2000 to 0x3FFF
 * There are 32 sets of 32 registers, one set for each possible
 * PHY address. Each 32 bit register is split into a 16-bit data
 * port and a couple of status bits.
 */

#define SF_MIIADDR_BASE         0x2000
#define SF_MIIADDR_MAX          0x3FFF
#define SF_MII_BLOCKS           32

#define SF_MII_DATAVALID        0x80000000
#define SF_MII_BUSY             0x40000000
#define SF_MII_DATAPORT         0x0000FFFF

#define SF_PHY_REG(phy, reg)                                            \
        (SF_MIIADDR_BASE + (phy * SF_MII_BLOCKS * sizeof(u_int32_t)) +  \
        (reg * sizeof(u_int32_t)))

/*
 * Ethernet extra registers 0x4000 to 0x4FFF
 */
#define SF_TESTMODE             0x4000
#define SF_RX_FRAMEPROC_CTL     0x4004
#define SF_TX_FRAMEPROC_CTL     0x4008

/*
 * MAC registers 0x5000 to 0x5FFF
 */
#define SF_MACCFG_1             0x5000
#define SF_MACCFG_2             0x5004
#define SF_BKTOBKIPG            0x5008
#define SF_NONBKTOBKIPG         0x500C
#define SF_COLRETRY             0x5010
#define SF_MAXLEN               0x5014
#define SF_TXNIBBLECNT          0x5018
#define SF_TXBYTECNT            0x501C
#define SF_RETXCNT              0x5020
#define SF_RANDNUM              0x5024
#define SF_RANDNUM_MASK         0x5028
#define SF_TOTALTXCNT           0x5034
#define SF_RXBYTECNT            0x5040
#define SF_TXPAUSETIMER         0x5060
#define SF_VLANTYPE             0x5064
#define SF_MIISTATUS            0x5070

#define SF_MACCFG1_HUGEFRAMES   0x00000001
#define SF_MACCFG1_FULLDUPLEX   0x00000002
#define SF_MACCFG1_AUTOPAD      0x00000004
#define SF_MACCFG1_HDJAM        0x00000008
#define SF_MACCFG1_DELAYCRC     0x00000010
#define SF_MACCFG1_NOBACKOFF    0x00000020
#define SF_MACCFG1_LENGTHCHECK  0x00000040
#define SF_MACCFG1_PUREPREAMBLE 0x00000080
#define SF_MACCFG1_PASSALLRX    0x00000100
#define SF_MACCFG1_PREAM_DETCNT 0x00000200
#define SF_MACCFG1_RX_FLOWENB   0x00000400
#define SF_MACCFG1_TX_FLOWENB   0x00000800
#define SF_MACCFG1_TESTMODE     0x00003000
#define SF_MACCFG1_MIILOOPBK    0x00004000
#define SF_MACCFG1_SOFTRESET    0x00008000

/*
 * There are the recommended IPG nibble counter settings
 * specified in the Adaptec manual for full duplex and
 * half duplex operation.
 */
#define SF_IPGT_FDX             0x15
#define SF_IPGT_HDX             0x11

/*
 * RX filter registers 0x6000 to 0x6FFF
 */
#define SF_RXFILT_PERFECT_BASE  0x6000
#define SF_RXFILT_PERFECT_MAX   0x60FF
#define SF_RXFILT_PERFECT_SKIP  0x0010
#define SF_RXFILT_PERFECT_CNT   0x0010

#define SF_RXFILT_HASH_BASE     0x6100
#define SF_RXFILT_HASH_MAX      0x62FF
#define SF_RXFILT_HASH_SKIP     0x0010
#define SF_RXFILT_HASH_CNT      0x001F
#define SF_RXFILT_HASH_ADDROFF  0x0000
#define SF_RXFILT_HASH_PRIOOFF  0x0004
#define SF_RXFILT_HASH_VLANOFF  0x0008

/*
 * Statistics registers 0x7000 to 0x7FFF
 */
#define SF_STATS_BASE           0x7000
#define SF_STATS_END            0x7FFF

/*
 * TX frame processor instruction space 0x8000 to 0x9FFF
 */

/*
 * RX frame processor instruction space 0xA000 to 0xBFFF
 */

/*
 * Ethernet FIFO access space 0xC000 to 0xDFFF
 */

/*
 * Reserved 0xE000 to 0xFFFF
 */

/*
 * Descriptor data structures.
 */


/* Receive descriptor formats. */
#define SF_RX_MINSPACING        8
#define SF_RX_DLIST_CNT         256
#define SF_RX_CLIST_CNT         1024
#define SF_RX_HOSTADDR(x)       (((x) >> 2) & 0x3FFFFFFF)

/*
 * RX buffer descriptor type 0, 32-bit addressing. Note that we
 * program the RX buffer queue control register(s) to allow a
 * descriptor spacing of 16 bytes, which leaves room after each
 * descriptor to store a pointer to the mbuf for each buffer.
 */
struct sf_rx_bufdesc_type0 {
        u_int32_t               sf_valid:1,
                                sf_end:1,
                                sf_addrlo:30;
        u_int32_t               sf_pad0;
#ifdef __i386__
        u_int32_t               sf_pad1;
#endif
        struct mbuf             *sf_mbuf;
};

/*
 * RX buffer descriptor type 0, 64-bit addressing.
 */
struct sf_rx_bufdesc_type1 {
        u_int32_t               sf_valid:1,
                                sf_end:1,
                                sf_addrlo:30;
        u_int32_t               sf_addrhi;
#ifdef __i386__
        u_int32_t               sf_pad;
#endif
        struct mbuf             *sf_mbuf;
};

/*
 * RX completion descriptor, type 0 (short).
 */
struct sf_rx_cmpdesc_type0 {
        u_int32_t               sf_len:16,
                                sf_endidx:11,
                                sf_status1:3,
                                sf_id:2;
};

/*
 * RX completion descriptor, type 1 (basic). Includes vlan ID
 * if this is a vlan-addressed packet, plus extended status.
 */
struct sf_rx_cmpdesc_type1 {
        u_int32_t               sf_len:16,
                                sf_endidx:11,
                                sf_status1:3,
                                sf_id:2;
        u_int16_t               sf_status2;
        u_int16_t               sf_vlanid;
};

/*
 * RX completion descriptor, type 2 (checksum). Includes partial TCP/IP
 * checksum instead of vlan tag, plus extended status.
 */
struct sf_rx_cmpdesc_type2 {
        u_int32_t               sf_len:16,
                                sf_endidx:11,
                                sf_status1:3,
                                sf_id:2;
        u_int16_t               sf_status2;
        u_int16_t               sf_cksum;
};

/*
 * RX completion descriptor type 3 (full). Includes timestamp, partial
 * TCP/IP checksum, vlan tag plus priority, two extended status fields.
 */
struct sf_rx_cmpdesc_type3 {
        u_int32_t               sf_len:16,
                                sf_endidx:11,
                                sf_status1:3,
                                sf_id:2;
        u_int32_t               sf_startidx:10,
                                sf_status3:6,
                                sf_status2:16;
        u_int16_t               sf_cksum;
        u_int16_t               sf_vlanid_prio;
        u_int32_t               sf_timestamp;
};

#define SF_RXSTAT1_QUEUE        0x1
#define SF_RXSTAT1_FIFOFULL     0x2
#define SF_RXSTAT1_OK           0x4

                                        /* 0=unknown,5=unsupported */
#define SF_RXSTAT2_FRAMETYPE    0x0007  /* 1=IPv4,2=IPv2,3=IPX,4=ICMP */
#define SF_RXSTAT2_UDP          0x0008
#define SF_RXSTAT2_TCP          0x0010
#define SF_RXSTAT2_FRAG         0x0020
#define SF_RXSTAT2_PCSUM_OK     0x0040  /* partial checksum ok */
#define SF_RXSTAT2_CSUM_BAD     0x0080  /* TCP/IP checksum bad */
#define SF_RXSTAT2_CSUM_OK      0x0100  /* TCP/IP checksum ok */
#define SF_RXSTAT2_VLAN         0x0200
#define SF_RXSTAT2_BADRXCODE    0x0400
#define SF_RXSTAT2_DRIBBLE      0x0800
#define SF_RXSTAT2_ISL_CRCERR   0x1000
#define SF_RXSTAT2_CRCERR       0x2000
#define SF_RXSTAT2_HASH         0x4000
#define SF_RXSTAT2_PERFECT      0x8000

#define SF_RXSTAT3_TRAILER      0x01
#define SF_RXSTAT3_HEADER       0x02
#define SF_RXSTAT3_CONTROL      0x04
#define SF_RXSTAT3_PAUSE        0x08
#define SF_RXSTAT3_ISL          0x10

/*
 * Transmit descriptor formats.
 * Each transmit descriptor type allows for a skip field at the
 * start of each structure. The size of the skip field can vary,
 * however we always set it for 8 bytes, which is enough to hold
 * a pointer (32 bits on x86, 64-bits on alpha) that we can use
 * to hold the address of the head of the mbuf chain for the
 * frame or fragment associated with the descriptor. This saves
 * us from having to create a separate pointer array to hold
 * the mbuf addresses.
 */
#define SF_TX_BUFDESC_ID                0xB
#define SF_MAXFRAGS                     14
#define SF_TX_MINSPACING                128
#define SF_TX_DLIST_CNT                 128
#define SF_TX_DLIST_SIZE                16384
#define SF_TX_SKIPLEN                   1
#define SF_TX_CLIST_CNT                 1024

struct sf_frag {
        u_int32_t               sf_addr;
        u_int16_t               sf_fraglen;
        u_int16_t               sf_pktlen;
};

struct sf_frag_msdos {
        u_int16_t               sf_pktlen;
        u_int16_t               sf_fraglen;
        u_int32_t               sf_addr;
};

/*
 * TX frame descriptor type 0, 32-bit addressing. One descriptor can
 * be used to map multiple packet fragments. We use this format since
 * BSD networking fragments packet data across mbuf chains. Note that
 * the number of fragments can be variable depending on how the descriptor
 * spacing is specified in the TX descriptor queue control register.
 * We always use a spacing of 128 bytes, and a skipfield length of 8
 * bytes: this means 16 bytes for the descriptor, including the skipfield,
 * with 121 bytes left for fragment maps. Each fragment requires 8 bytes,
 * which allows for 14 fragments per descriptor. The total size of the
 * transmit buffer queue is limited to 16384 bytes, so with a spacing of
 * 128 bytes per descriptor, we have room for 128 descriptors in the queue.
 */
struct sf_tx_bufdesc_type0 {
#ifdef __i386__
        u_int32_t               sf_pad;
#endif
        struct mbuf             *sf_mbuf;
        u_int32_t               sf_rsvd0:24,
                                sf_crcen:1,
                                sf_caltcp:1,
                                sf_end:1,
                                sf_intr:1,
                                sf_id:4;
        u_int8_t                sf_fragcnt;
        u_int8_t                sf_rsvd2;
        u_int16_t               sf_rsvd1;
        struct sf_frag          sf_frags[14];
};

/*
 * TX buffer descriptor type 1, 32-bit addressing. Each descriptor
 * maps a single fragment.
 */
struct sf_tx_bufdesc_type1 {
#ifdef __i386__
        u_int32_t               sf_pad;
#endif
        struct mbuf             *sf_mbuf;
        u_int32_t               sf_fraglen:16,
                                sf_fragcnt:8,
                                sf_crcen:1,
                                sf_caltcp:1,
                                sf_end:1,
                                sf_intr:1,
                                sf_id:4;
        u_int32_t               sf_addr;
};

/*
 * TX buffer descriptor type 2, 64-bit addressing. Each descriptor
 * maps a single fragment.
 */
struct sf_tx_bufdesc_type2 {
#ifdef __i386__
        u_int32_t               sf_pad;
#endif
        struct mbuf             *sf_mbuf;
        u_int32_t               sf_fraglen:16,
                                sf_fragcnt:8,
                                sf_crcen:1,
                                sf_caltcp:1,
                                sf_end:1,
                                sf_intr:1,
                                sf_id:4;
        u_int32_t               sf_addrlo;
        u_int32_t               sf_addrhi;
};

/* TX buffer descriptor type 3 is not defined. */

/*
 * TX frame descriptor type 4, 32-bit addressing. This is a special
 * case of the type 0 descriptor, identical except that the fragment
 * address and length fields are ordered differently. This is done
 * to optimize copies in MS-DOS and OS/2 drivers.
 */
struct sf_tx_bufdesc_type4 {
#ifdef __i386__
        u_int32_t               sf_pad;
#endif
        struct mbuf             *sf_mbuf;
        u_int32_t               sf_rsvd0:24,
                                sf_crcen:1,
                                sf_caltcp:1,
                                sf_end:1,
                                sf_intr:1,
                                sf_id:4;
        u_int8_t                sf_fragcnt;
        u_int8_t                sf_rsvd2;
        u_int16_t               sf_rsvd1;
        struct sf_frag_msdos    sf_frags[14];
};

/*
 * Transmit completion queue descriptor formats.
 */

/*
 * Transmit DMA completion descriptor, type 0.
 */
#define SF_TXCMPTYPE_DMA        0x4
struct sf_tx_cmpdesc_type0 {
        u_int32_t               sf_index:15,
                                sf_priority:1,
                                sf_timestamp:13,
                                sf_type:3;
};

/*
 * Transmit completion descriptor, type 1.
 */
#define SF_TXCMPTYPE_TX         0x5
struct sf_tx_cmpdesc_type1 {
        u_int32_t               sf_index:15,
                                sf_priority:1,
                                sf_txstat:13,
                                sf_type:3;
};

#define SF_TXSTAT_CRCERR        0x0001
#define SF_TXSTAT_LENCHECKERR   0x0002
#define SF_TXSTAT_LENRANGEERR   0x0004
#define SF_TXSTAT_TX_OK         0x0008
#define SF_TXSTAT_TX_DEFERED    0x0010
#define SF_TXSTAT_EXCESS_DEFER  0x0020
#define SF_TXSTAT_EXCESS_COLL   0x0040
#define SF_TXSTAT_LATE_COLL     0x0080
#define SF_TXSTAT_TOOBIG        0x0100
#define SF_TXSTAT_TX_UNDERRUN   0x0200
#define SF_TXSTAT_CTLFRAME_OK   0x0400
#define SF_TXSTAT_PAUSEFRAME_OK 0x0800
#define SF_TXSTAT_PAUSED        0x1000

/* Statistics counters. */
struct sf_stats {
        u_int32_t               sf_tx_frames;
        u_int32_t               sf_tx_single_colls;
        u_int32_t               sf_tx_multi_colls;
        u_int32_t               sf_tx_crcerrs;
        u_int32_t               sf_tx_bytes;
        u_int32_t               sf_tx_defered;
        u_int32_t               sf_tx_late_colls;
        u_int32_t               sf_tx_pause_frames;
        u_int32_t               sf_tx_control_frames;
        u_int32_t               sf_tx_excess_colls;
        u_int32_t               sf_tx_excess_defer;
        u_int32_t               sf_tx_mcast_frames;
        u_int32_t               sf_tx_bcast_frames;
        u_int32_t               sf_tx_frames_lost;
        u_int32_t               sf_rx_rx_frames;
        u_int32_t               sf_rx_crcerrs;
        u_int32_t               sf_rx_alignerrs;
        u_int32_t               sf_rx_bytes;
        u_int32_t               sf_rx_control_frames;
        u_int32_t               sf_rx_unsup_control_frames;
        u_int32_t               sf_rx_giants;
        u_int32_t               sf_rx_runts;
        u_int32_t               sf_rx_jabbererrs;
        u_int32_t               sf_rx_pkts_64;
        u_int32_t               sf_rx_pkts_65_127;
        u_int32_t               sf_rx_pkts_128_255;
        u_int32_t               sf_rx_pkts_256_511;
        u_int32_t               sf_rx_pkts_512_1023;
        u_int32_t               sf_rx_pkts_1024_1518;
        u_int32_t               sf_rx_frames_lost;
        u_int16_t               sf_tx_underruns;
        u_int16_t               sf_pad;
};

/*
 * register space access macros
 */
#define CSR_WRITE_4(sc, reg, val)       \
        bus_space_write_4(sc->sf_btag, sc->sf_bhandle, reg, val)

#define CSR_READ_4(sc, reg)             \
        bus_space_read_4(sc->sf_btag, sc->sf_bhandle, reg)

#define CSR_READ_1(sc, reg)             \
        bus_space_read_1(sc->sf_btag, sc->sf_bhandle, reg)


struct sf_type {
        u_int16_t               sf_vid;
        u_int16_t               sf_did;
        char                    *sf_name;
};

#define SF_INC(x, y)    (x) = (x + 1) % y

#define ETHER_ALIGN 2

/*
 * Note: alignment is important here: each list must be aligned to
 * a 256-byte boundary. It turns out that each ring is some multiple
 * of 4K in length, so we can stack them all on top of each other
 * and just worry about aligning the whole mess. There's one transmit
 * buffer ring and two receive buffer rings: one RX ring is for small
 * packets and the other is for large packets. Each buffer ring also
 * has a companion completion queue.
 */
struct sf_list_data {
        struct sf_tx_bufdesc_type0      sf_tx_dlist[SF_TX_DLIST_CNT];
        struct sf_tx_cmpdesc_type1      sf_tx_clist[SF_TX_CLIST_CNT];
        struct sf_rx_bufdesc_type0      sf_rx_dlist_big[SF_RX_DLIST_CNT];
#ifdef notdef
        /*
         * Unfortunately, because the Starfire doesn't allow arbitrary
         * byte alignment, we have to copy packets in the RX handler in
         * order to align the payload correctly. This means that we
         * don't gain anything by having separate large and small descriptor
         * lists, so for now we don't bother with the small one.
         */
        struct sf_rx_bufdesc_type0      sf_rx_dlist_small[SF_RX_DLIST_CNT];
#endif
        struct sf_rx_cmpdesc_type3      sf_rx_clist[SF_RX_CLIST_CNT];
};

struct sf_softc {
        struct arpcom           arpcom;         /* interface info */
        bus_space_handle_t      sf_bhandle;     /* bus space handle */
        bus_space_tag_t         sf_btag;        /* bus space tag */
        void                    *sf_intrhand;   /* interrupt handler cookie */
        struct resource         *sf_irq;        /* irq resource descriptor */
        struct resource         *sf_res;        /* mem/ioport resource */
        struct sf_type          *sf_info;       /* Starfire adapter info */
        device_t                sf_miibus;
        u_int8_t                sf_unit;        /* interface number */
        struct sf_list_data     *sf_ldata;
        int                     sf_tx_cnt;
        u_int8_t                sf_link;
        int                     sf_if_flags;
        struct callout          sf_stat_timer;
};

#define SF_TIMEOUT      1000