Merge branch 'vendor/OPENSSL'
[dragonfly.git] / sys / netinet6 / in6_pcb.c
1 /*      $FreeBSD: src/sys/netinet6/in6_pcb.c,v 1.10.2.9 2003/01/24 05:11:35 sam Exp $   */
2 /*      $KAME: in6_pcb.c,v 1.31 2001/05/21 05:45:10 jinmei Exp $        */
3
4 /*
5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the project nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  *
32  */
33
34 /*
35  * Copyright (c) 1982, 1986, 1991, 1993
36  *      The Regents of the University of California.  All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  * 1. Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  * 2. Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in the
45  *    documentation and/or other materials provided with the distribution.
46  * 3. Neither the name of the University nor the names of its contributors
47  *    may be used to endorse or promote products derived from this software
48  *    without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
51  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
52  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
53  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
54  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
55  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
56  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
57  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
58  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
59  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
60  * SUCH DAMAGE.
61  *
62  *      @(#)in_pcb.c    8.2 (Berkeley) 1/4/94
63  */
64
65 #include "opt_inet.h"
66 #include "opt_inet6.h"
67 #include "opt_ipsec.h"
68
69 #include <sys/param.h>
70 #include <sys/systm.h>
71 #include <sys/malloc.h>
72 #include <sys/mbuf.h>
73 #include <sys/domain.h>
74 #include <sys/protosw.h>
75 #include <sys/socket.h>
76 #include <sys/socketvar.h>
77 #include <sys/sockio.h>
78 #include <sys/errno.h>
79 #include <sys/time.h>
80 #include <sys/proc.h>
81 #include <sys/priv.h>
82 #include <sys/jail.h>
83
84 #include <sys/thread2.h>
85 #include <sys/msgport2.h>
86
87 #include <vm/vm_zone.h>
88
89 #include <net/if.h>
90 #include <net/if_types.h>
91 #include <net/route.h>
92 #include <net/netisr2.h>
93
94 #include <netinet/in.h>
95 #include <netinet/in_var.h>
96 #include <netinet/in_systm.h>
97 #include <netinet/ip6.h>
98 #include <netinet/ip_var.h>
99 #include <netinet6/ip6_var.h>
100 #include <netinet6/nd6.h>
101 #include <netinet/in_pcb.h>
102 #include <netinet6/in6_pcb.h>
103
104 #ifdef IPSEC
105 #include <netinet6/ipsec.h>
106 #ifdef INET6
107 #include <netinet6/ipsec6.h>
108 #endif
109 #include <netinet6/ah.h>
110 #ifdef INET6
111 #include <netinet6/ah6.h>
112 #endif
113 #include <netproto/key/key.h>
114 #endif /* IPSEC */
115
116 #ifdef FAST_IPSEC
117 #include <netproto/ipsec/ipsec.h>
118 #include <netproto/ipsec/ipsec6.h>
119 #include <netproto/ipsec/key.h>
120 #define IPSEC
121 #endif /* FAST_IPSEC */
122
123 struct  in6_addr zeroin6_addr;
124
125 int
126 in6_pcbbind(struct inpcb *inp, struct sockaddr *nam, struct thread *td)
127 {
128         struct socket *so = inp->inp_socket;
129         struct sockaddr_in6 jsin6;
130         int error;
131
132         if (!in6_ifaddr) /* XXX broken! */
133                 return (EADDRNOTAVAIL);
134         if (inp->inp_lport || !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
135                 return (EINVAL);
136
137         if (nam) {
138                 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
139                 struct inpcbinfo *pcbinfo;
140                 struct inpcbportinfo *portinfo;
141                 int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);
142                 struct ucred *cred = NULL;
143                 struct inpcb *t;
144                 u_short lport, lport_ho;
145
146                 if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
147                         wild = 1;
148                 if (td->td_proc != NULL)
149                         cred = td->td_proc->p_ucred;
150
151                 if (nam->sa_len != sizeof(*sin6))
152                         return (EINVAL);
153                 /*
154                  * family check.
155                  */
156                 if (nam->sa_family != AF_INET6)
157                         return (EAFNOSUPPORT);
158
159                 if (!prison_replace_wildcards(td, nam))
160                         return (EINVAL);
161
162                 /* KAME hack: embed scopeid */
163                 if (in6_embedscope(&sin6->sin6_addr, sin6, inp, NULL) != 0)
164                         return (EINVAL);
165                 /* this must be cleared for ifa_ifwithaddr() */
166                 sin6->sin6_scope_id = 0;
167
168                 lport = sin6->sin6_port;
169                 if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
170                         /*
171                          * Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
172                          * allow compepte duplication of binding if
173                          * SO_REUSEPORT is set, or if SO_REUSEADDR is set
174                          * and a multicast address is bound on both
175                          * new and duplicated sockets.
176                          */
177                         if (so->so_options & SO_REUSEADDR)
178                                 reuseport = SO_REUSEADDR|SO_REUSEPORT;
179                 } else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
180                         struct ifaddr *ia = NULL;
181
182                         sin6->sin6_port = 0;            /* yech... */
183                         if (!prison_replace_wildcards(td, (struct sockaddr *)sin6)) {
184                                 sin6->sin6_addr = kin6addr_any;
185                                 return (EINVAL);
186                         }
187                         if ((ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == NULL)
188                                 return (EADDRNOTAVAIL);
189
190                         /*
191                          * XXX: bind to an anycast address might accidentally
192                          * cause sending a packet with anycast source address.
193                          * We should allow to bind to a deprecated address, since
194                          * the application dare to use it.
195                          */
196                         if (ia &&
197                             ((struct in6_ifaddr *)ia)->ia6_flags &
198                             (IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|IN6_IFF_DETACHED))
199                                 return (EADDRNOTAVAIL);
200                 }
201
202                 inp->in6p_laddr = sin6->sin6_addr;
203
204                 if (lport == 0)
205                         goto auto_select;
206                 lport_ho = ntohs(lport);
207
208                 /* GROSS */
209                 if (lport_ho < IPV6PORT_RESERVED && cred &&
210                     priv_check_cred(cred, PRIV_NETINET_RESERVEDPORT, 0)) {
211                         inp->in6p_laddr = kin6addr_any;
212                         return (EACCES);
213                 }
214
215                 /*
216                  * Locate the proper portinfo based on lport
217                  */
218                 pcbinfo = inp->inp_pcbinfo;
219                 portinfo =
220                     &pcbinfo->portinfo[lport_ho & pcbinfo->portinfo_mask];
221                 KKASSERT((lport_ho & pcbinfo->portinfo_mask) ==
222                     portinfo->offset);
223
224                 /*
225                  * This has to be atomic.  If the porthash is shared across
226                  * multiple protocol threads (aka tcp) then the token must
227                  * be held.
228                  */
229                 GET_PORT_TOKEN(portinfo);
230
231                 if (so->so_cred->cr_uid != 0 &&
232                     !IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
233                         t = in6_pcblookup_local(portinfo,
234                             &sin6->sin6_addr, lport, INPLOOKUP_WILDCARD, cred);
235                         if (t &&
236                             (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr) ||
237                              !IN6_IS_ADDR_UNSPECIFIED(&t->in6p_laddr) ||
238                              (t->inp_socket->so_options & SO_REUSEPORT) == 0) &&
239                             (so->so_cred->cr_uid !=
240                              t->inp_socket->so_cred->cr_uid)) {
241                                 inp->in6p_laddr = kin6addr_any;
242                                 error = EADDRINUSE;
243                                 goto done;
244                         }
245                         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
246                             IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
247                                 struct sockaddr_in sin;
248
249                                 in6_sin6_2_sin(&sin, sin6);
250                                 t = in_pcblookup_local(portinfo,
251                                     sin.sin_addr, lport,
252                                     INPLOOKUP_WILDCARD, cred);
253                                 if (t &&
254                                     (so->so_cred->cr_uid !=
255                                      t->inp_socket->so_cred->cr_uid) &&
256                                     (ntohl(t->inp_laddr.s_addr) != INADDR_ANY ||
257                                      INP_SOCKAF(so) ==
258                                      INP_SOCKAF(t->inp_socket))) {
259                                         inp->in6p_laddr = kin6addr_any;
260                                         error = EADDRINUSE;
261                                         goto done;
262                                 }
263                         }
264                 }
265                 if (cred && cred->cr_prison &&
266                     !prison_replace_wildcards(td, nam)) {
267                         inp->in6p_laddr = kin6addr_any;
268                         error = EADDRNOTAVAIL;
269                         goto done;
270                 }
271                 t = in6_pcblookup_local(portinfo, &sin6->sin6_addr, lport,
272                     wild, cred);
273                 if (t && (reuseport & t->inp_socket->so_options) == 0) {
274                         inp->in6p_laddr = kin6addr_any;
275                         error = EADDRINUSE;
276                         goto done;
277                 }
278                 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
279                     IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
280                         struct sockaddr_in sin;
281
282                         in6_sin6_2_sin(&sin, sin6);
283                         t = in_pcblookup_local(portinfo, sin.sin_addr, lport,
284                             wild, cred);
285                         if (t && (reuseport & t->inp_socket->so_options) == 0 &&
286                             (ntohl(t->inp_laddr.s_addr) != INADDR_ANY ||
287                              INP_SOCKAF(so) == INP_SOCKAF(t->inp_socket))) {
288                                 inp->in6p_laddr = kin6addr_any;
289                                 error = EADDRINUSE;
290                                 goto done;
291                         }
292                 }
293
294                 inp->inp_lport = lport;
295                 in_pcbinsporthash(portinfo, inp);
296                 error = 0;
297 done:
298                 REL_PORT_TOKEN(portinfo);
299                 return (error);
300         } else {
301 auto_select:
302                 jsin6.sin6_addr = inp->in6p_laddr;
303                 jsin6.sin6_family = AF_INET6;
304                 if (!prison_replace_wildcards(td, (struct sockaddr*)&jsin6)) {
305                         inp->in6p_laddr = kin6addr_any;
306                         inp->inp_lport = 0;
307                         return (EINVAL);
308                 }
309
310                 return in6_pcbsetlport(&inp->in6p_laddr, inp, td);
311         }
312 }
313
314 /*
315  *   Transform old in6_pcbconnect() into an inner subroutine for new
316  *   in6_pcbconnect(): Do some validity-checking on the remote
317  *   address (in mbuf 'nam') and then determine local host address
318  *   (i.e., which interface) to use to access that remote host.
319  *
320  *   This preserves definition of in6_pcbconnect(), while supporting a
321  *   slightly different version for T/TCP.  (This is more than
322  *   a bit of a kludge, but cleaning up the internal interfaces would
323  *   have forced minor changes in every protocol).
324  */
325
326 int
327 in6_pcbladdr(struct inpcb *inp, struct sockaddr *nam,
328              struct in6_addr **plocal_addr6, struct thread *td)
329 {
330         struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
331         struct ifnet *ifp = NULL;
332         int error = 0;
333
334         if (nam->sa_len != sizeof (*sin6))
335                 return (EINVAL);
336         if (sin6->sin6_family != AF_INET6)
337                 return (EAFNOSUPPORT);
338         if (sin6->sin6_port == 0)
339                 return (EADDRNOTAVAIL);
340
341         /* KAME hack: embed scopeid */
342         if (in6_embedscope(&sin6->sin6_addr, sin6, inp, &ifp) != 0)
343                 return EINVAL;
344
345         if (in6_ifaddr) {
346                 /*
347                  * If the destination address is UNSPECIFIED addr,
348                  * use the loopback addr, e.g ::1.
349                  */
350                 if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
351                         sin6->sin6_addr = kin6addr_loopback;
352         }
353         {
354                 /*
355                  * XXX: in6_selectsrc might replace the bound local address
356                  * with the address specified by setsockopt(IPV6_PKTINFO).
357                  * Is it the intended behavior?
358                  */
359                 *plocal_addr6 = in6_selectsrc(sin6, inp->in6p_outputopts,
360                                               inp->in6p_moptions,
361                                               &inp->in6p_route,
362                                               &inp->in6p_laddr, &error, td);
363                 if (*plocal_addr6 == NULL) {
364                         if (error == 0)
365                                 error = EADDRNOTAVAIL;
366                         return (error);
367                 }
368                 /*
369                  * Don't do pcblookup call here; return interface in
370                  * plocal_addr6
371                  * and exit to caller, that will do the lookup.
372                  */
373         }
374
375         if (inp->in6p_route.ro_rt)
376                 ifp = inp->in6p_route.ro_rt->rt_ifp;
377
378         return (0);
379 }
380
381 /*
382  * Outer subroutine:
383  * Connect from a socket to a specified address.
384  * Both address and port must be specified in argument sin.
385  * If don't have a local address for this socket yet,
386  * then pick one.
387  */
388 int
389 in6_pcbconnect(struct inpcb *inp, struct sockaddr *nam, struct thread *td)
390 {
391         struct in6_addr *addr6;
392         struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
393         int error;
394
395         /*
396          * Call inner routine, to assign local interface address.
397          * in6_pcbladdr() may automatically fill in sin6_scope_id.
398          */
399         if ((error = in6_pcbladdr(inp, nam, &addr6, td)) != 0)
400                 return (error);
401
402         if (in6_pcblookup_hash(inp->inp_pcbinfo, &sin6->sin6_addr,
403                                sin6->sin6_port,
404                               IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)
405                               ? addr6 : &inp->in6p_laddr,
406                               inp->inp_lport, 0, NULL) != NULL) {
407                 return (EADDRINUSE);
408         }
409         if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
410                 if (inp->inp_lport == 0) {
411                         error = in6_pcbbind(inp, NULL, td);
412                         if (error)
413                                 return (error);
414                 }
415                 inp->in6p_laddr = *addr6;
416         }
417         inp->in6p_faddr = sin6->sin6_addr;
418         inp->inp_fport = sin6->sin6_port;
419         /* update flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
420         inp->in6p_flowinfo &= ~IPV6_FLOWLABEL_MASK;
421         if (inp->in6p_flags & IN6P_AUTOFLOWLABEL)
422                 inp->in6p_flowinfo |=
423                     (htonl(ip6_flow_seq++) & IPV6_FLOWLABEL_MASK);
424
425         in_pcbinsconnhash(inp);
426         return (0);
427 }
428
429 #if 0
430 /*
431  * Return an IPv6 address, which is the most appropriate for given
432  * destination and user specified options.
433  * If necessary, this function lookups the routing table and return
434  * an entry to the caller for later use.
435  */
436 struct in6_addr *
437 in6_selectsrc(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
438               struct ip6_moptions *mopts, struct route_in6 *ro,
439               struct in6_addr *laddr, int *errorp, struct thread *td)
440 {
441         struct sockaddr_in6 jsin6;
442         struct ucred *cred = NULL;
443         struct in6_addr *dst;
444         struct in6_ifaddr *ia6 = 0;
445         struct in6_pktinfo *pi = NULL;
446         int jailed = 0;
447
448         if (td && td->td_proc && td->td_proc->p_ucred)
449                 cred = td->td_proc->p_ucred;
450         if (cred && cred->cr_prison)
451                 jailed = 1;
452         jsin6.sin6_family = AF_INET6;
453         dst = &dstsock->sin6_addr;
454         *errorp = 0;
455
456         /*
457          * If the source address is explicitly specified by the caller,
458          * use it.
459          */
460         if (opts && (pi = opts->ip6po_pktinfo) &&
461             !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
462                 jsin6.sin6_addr = pi->ipi6_addr;
463                 if (jailed && !jailed_ip(cred->cr_prison,
464                     (struct sockaddr *)&jsin6)) {
465                         return(0);
466                 } else {
467                         return (&pi->ipi6_addr);
468                 }
469         }
470
471         /*
472          * If the source address is not specified but the socket(if any)
473          * is already bound, use the bound address.
474          */
475         if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr)) {
476                 jsin6.sin6_addr = *laddr;
477                 if (jailed && !jailed_ip(cred->cr_prison,
478                     (struct sockaddr *)&jsin6)) {
479                         return(0);
480                 } else {
481                         return (laddr);
482                 }
483         }
484
485         /*
486          * If the caller doesn't specify the source address but
487          * the outgoing interface, use an address associated with
488          * the interface.
489          */
490         if (pi && pi->ipi6_ifindex) {
491                 /* XXX boundary check is assumed to be already done. */
492                 ia6 = in6_ifawithscope(ifindex2ifnet[pi->ipi6_ifindex],
493                                        dst, cred);
494
495                 if (ia6 && jailed) {
496                         jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
497                         if (!jailed_ip(cred->cr_prison,
498                                 (struct sockaddr *)&jsin6))
499                                 ia6 = 0;
500                 }
501
502                 if (ia6 == 0) {
503                         *errorp = EADDRNOTAVAIL;
504                         return (0);
505                 }
506                 return (&satosin6(&ia6->ia_addr)->sin6_addr);
507         }
508
509         /*
510          * If the destination address is a link-local unicast address or
511          * a multicast address, and if the outgoing interface is specified
512          * by the sin6_scope_id filed, use an address associated with the
513          * interface.
514          * XXX: We're now trying to define more specific semantics of
515          *      sin6_scope_id field, so this part will be rewritten in
516          *      the near future.
517          */
518         if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MULTICAST(dst)) &&
519             dstsock->sin6_scope_id) {
520                 /*
521                  * I'm not sure if boundary check for scope_id is done
522                  * somewhere...
523                  */
524                 if (dstsock->sin6_scope_id < 0 ||
525                     if_index < dstsock->sin6_scope_id) {
526                         *errorp = ENXIO; /* XXX: better error? */
527                         return (0);
528                 }
529                 ia6 = in6_ifawithscope(ifindex2ifnet[dstsock->sin6_scope_id],
530                                        dst, cred);
531
532                 if (ia6 && jailed) {
533                         jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
534                         if (!jailed_ip(cred->cr_prison,
535                                 (struct sockaddr *)&jsin6))
536                                 ia6 = 0;
537                 }
538
539                 if (ia6 == 0) {
540                         *errorp = EADDRNOTAVAIL;
541                         return (0);
542                 }
543                 return (&satosin6(&ia6->ia_addr)->sin6_addr);
544         }
545
546         /*
547          * If the destination address is a multicast address and
548          * the outgoing interface for the address is specified
549          * by the caller, use an address associated with the interface.
550          * There is a sanity check here; if the destination has node-local
551          * scope, the outgoing interfacde should be a loopback address.
552          * Even if the outgoing interface is not specified, we also
553          * choose a loopback interface as the outgoing interface.
554          */
555         if (!jailed && IN6_IS_ADDR_MULTICAST(dst)) {
556                 struct ifnet *ifp = mopts ? mopts->im6o_multicast_ifp : NULL;
557
558                 if (ifp == NULL && IN6_IS_ADDR_MC_NODELOCAL(dst)) {
559                         ifp = &loif[0];
560                 }
561
562                 if (ifp) {
563                         ia6 = in6_ifawithscope(ifp, dst, cred);
564                         if (ia6 == 0) {
565                                 *errorp = EADDRNOTAVAIL;
566                                 return (0);
567                         }
568                         return (&ia6->ia_addr.sin6_addr);
569                 }
570         }
571
572         /*
573          * If the next hop address for the packet is specified
574          * by caller, use an address associated with the route
575          * to the next hop.
576          */
577         {
578                 struct sockaddr_in6 *sin6_next;
579                 struct rtentry *rt;
580
581                 if (opts && opts->ip6po_nexthop) {
582                         sin6_next = satosin6(opts->ip6po_nexthop);
583                         rt = nd6_lookup(&sin6_next->sin6_addr, 1, NULL);
584                         if (rt) {
585                                 ia6 = in6_ifawithscope(rt->rt_ifp, dst, cred);
586                                 if (ia6 == 0)
587                                         ia6 = ifatoia6(rt->rt_ifa);
588                         }
589                         if (ia6 && jailed) {
590                                 jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
591                                 if (!jailed_ip(cred->cr_prison,
592                                         (struct sockaddr *)&jsin6))
593                                         ia6 = 0;
594                         }
595
596                         if (ia6 == 0) {
597                                 *errorp = EADDRNOTAVAIL;
598                                 return (0);
599                         }
600                         return (&satosin6(&ia6->ia_addr)->sin6_addr);
601                 }
602         }
603
604         /*
605          * If route is known or can be allocated now,
606          * our src addr is taken from the i/f, else punt.
607          */
608         if (ro) {
609                 if (ro->ro_rt &&
610                     !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr, dst)) {
611                         RTFREE(ro->ro_rt);
612                         ro->ro_rt = NULL;
613                 }
614                 if (ro->ro_rt == NULL || ro->ro_rt->rt_ifp == NULL) {
615                         struct sockaddr_in6 *dst6;
616
617                         /* No route yet, so try to acquire one */
618                         bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
619                         dst6 = &ro->ro_dst;
620                         dst6->sin6_family = AF_INET6;
621                         dst6->sin6_len = sizeof(struct sockaddr_in6);
622                         dst6->sin6_addr = *dst;
623                         if (!jailed && IN6_IS_ADDR_MULTICAST(dst)) {
624                                 ro->ro_rt =
625                                   rtpurelookup((struct sockaddr *)&ro->ro_dst);
626                         } else {
627                                 rtalloc((struct route *)ro);
628                         }
629                 }
630
631                 /*
632                  * in_pcbconnect() checks out IFF_LOOPBACK to skip using
633                  * the address. But we don't know why it does so.
634                  * It is necessary to ensure the scope even for lo0
635                  * so doesn't check out IFF_LOOPBACK.
636                  */
637
638                 if (ro->ro_rt) {
639                         ia6 = in6_ifawithscope(ro->ro_rt->rt_ifa->ifa_ifp, dst, cred);
640                         if (ia6 && jailed) {
641                                 jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
642                                 if (!jailed_ip(cred->cr_prison,
643                                         (struct sockaddr *)&jsin6))
644                                         ia6 = 0;
645                         }
646
647                         if (ia6 == 0) /* xxx scope error ?*/
648                                 ia6 = ifatoia6(ro->ro_rt->rt_ifa);
649
650                         if (ia6 && jailed) {
651                                 jsin6.sin6_addr = (&ia6->ia_addr)->sin6_addr;
652                                 if (!jailed_ip(cred->cr_prison,
653                                         (struct sockaddr *)&jsin6))
654                                         ia6 = 0;
655                         }
656                 }
657                 if (ia6 == 0) {
658                         *errorp = EHOSTUNREACH; /* no route */
659                         return (0);
660                 }
661                 return (&satosin6(&ia6->ia_addr)->sin6_addr);
662         }
663
664         *errorp = EADDRNOTAVAIL;
665         return (0);
666 }
667
668 /*
669  * Default hop limit selection. The precedence is as follows:
670  * 1. Hoplimit valued specified via ioctl.
671  * 2. (If the outgoing interface is detected) the current
672  *     hop limit of the interface specified by router advertisement.
673  * 3. The system default hoplimit.
674 */
675 int
676 in6_selecthlim(struct in6pcb *in6p, struct ifnet *ifp)
677 {
678         if (in6p && in6p->in6p_hops >= 0)
679                 return (in6p->in6p_hops);
680         else if (ifp)
681                 return (ND_IFINFO(ifp)->chlim);
682         else
683                 return (ip6_defhlim);
684 }
685 #endif
686
687 void
688 in6_pcbdisconnect(struct inpcb *inp)
689 {
690         bzero((caddr_t)&inp->in6p_faddr, sizeof(inp->in6p_faddr));
691         inp->inp_fport = 0;
692         /* clear flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
693         inp->in6p_flowinfo &= ~IPV6_FLOWLABEL_MASK;
694         in_pcbremconnhash(inp);
695         if (inp->inp_socket->so_state & SS_NOFDREF)
696                 in6_pcbdetach(inp);
697 }
698
699 void
700 in6_pcbdetach(struct inpcb *inp)
701 {
702         struct socket *so = inp->inp_socket;
703         struct inpcbinfo *ipi = inp->inp_pcbinfo;
704
705 #ifdef IPSEC
706         if (inp->in6p_sp != NULL)
707                 ipsec6_delete_pcbpolicy(inp);
708 #endif /* IPSEC */
709         inp->inp_gencnt = ++ipi->ipi_gencnt;
710         in_pcbremlists(inp);
711         so->so_pcb = NULL;
712         KKASSERT((so->so_state & SS_ASSERTINPROG) == 0);
713         sofree(so);             /* remove pcb ref */
714
715         if (inp->in6p_options)
716                 m_freem(inp->in6p_options);
717         ip6_freepcbopts(inp->in6p_outputopts);
718         ip6_freemoptions(inp->in6p_moptions);
719         if (inp->in6p_route.ro_rt)
720                 rtfree(inp->in6p_route.ro_rt);
721         /* Check and free IPv4 related resources in case of mapped addr */
722         if (inp->inp_options)
723                 m_free(inp->inp_options);
724         ip_freemoptions(inp->inp_moptions);
725
726         inp->inp_vflag = 0;
727         kfree(inp, M_PCB);
728 }
729
730 /*
731  * The calling convention of in6_setsockaddr() and in6_setpeeraddr() was
732  * modified to match the pru_sockaddr() and pru_peeraddr() entry points
733  * in struct pr_usrreqs, so that protocols can just reference then directly
734  * without the need for a wrapper function.  The socket must have a valid
735  * (i.e., non-nil) PCB, but it should be impossible to get an invalid one
736  * except through a kernel programming error, so it is acceptable to panic
737  * (or in this case trap) if the PCB is invalid.  (Actually, we don't trap
738  * because there actually /is/ a programming error somewhere... XXX)
739  */
740 void
741 in6_setsockaddr_dispatch(netmsg_t msg)
742 {
743         int error;
744
745         error = in6_setsockaddr(msg->sockaddr.base.nm_so, msg->sockaddr.nm_nam);
746         lwkt_replymsg(&msg->sockaddr.base.lmsg, error);
747 }
748
749 int
750 in6_setsockaddr(struct socket *so, struct sockaddr **nam)
751 {
752         struct inpcb *inp;
753         struct sockaddr_in6 *sin6;
754
755         /*
756          * Do the malloc first in case it blocks.
757          */
758         sin6 = kmalloc(sizeof *sin6, M_SONAME, M_WAITOK | M_ZERO);
759         sin6->sin6_family = AF_INET6;
760         sin6->sin6_len = sizeof(*sin6);
761
762         crit_enter();
763         inp = so->so_pcb;
764         if (!inp) {
765                 crit_exit();
766                 kfree(sin6, M_SONAME);
767                 return EINVAL;
768         }
769         sin6->sin6_port = inp->inp_lport;
770         sin6->sin6_addr = inp->in6p_laddr;
771         crit_exit();
772         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
773                 sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
774         else
775                 sin6->sin6_scope_id = 0;        /*XXX*/
776         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
777                 sin6->sin6_addr.s6_addr16[1] = 0;
778
779         *nam = (struct sockaddr *)sin6;
780         return 0;
781 }
782
783 void
784 in6_setpeeraddr_dispatch(netmsg_t msg)
785 {
786         int error;
787
788         error = in6_setpeeraddr(msg->peeraddr.base.nm_so, msg->peeraddr.nm_nam);
789         lwkt_replymsg(&msg->peeraddr.base.lmsg, error);
790 }
791
792 int
793 in6_setpeeraddr(struct socket *so, struct sockaddr **nam)
794 {
795         struct inpcb *inp;
796         struct sockaddr_in6 *sin6;
797
798         /*
799          * Do the malloc first in case it blocks.
800          */
801         sin6 = kmalloc(sizeof(*sin6), M_SONAME, M_WAITOK | M_ZERO);
802         sin6->sin6_family = AF_INET6;
803         sin6->sin6_len = sizeof(struct sockaddr_in6);
804
805         crit_enter();
806         inp = so->so_pcb;
807         if (!inp) {
808                 crit_exit();
809                 kfree(sin6, M_SONAME);
810                 return EINVAL;
811         }
812         sin6->sin6_port = inp->inp_fport;
813         sin6->sin6_addr = inp->in6p_faddr;
814         crit_exit();
815         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
816                 sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
817         else
818                 sin6->sin6_scope_id = 0;        /*XXX*/
819         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
820                 sin6->sin6_addr.s6_addr16[1] = 0;
821
822         *nam = (struct sockaddr *)sin6;
823         return 0;
824 }
825
826 void
827 in6_mapped_sockaddr_dispatch(netmsg_t msg)
828 {
829         int error;
830
831         error = in6_mapped_sockaddr(msg->sockaddr.base.nm_so,
832                                     msg->sockaddr.nm_nam);
833         lwkt_replymsg(&msg->sockaddr.base.lmsg, error);
834 }
835
836 int
837 in6_mapped_sockaddr(struct socket *so, struct sockaddr **nam)
838 {
839         struct  inpcb *inp = so->so_pcb;
840         int     error;
841
842         if (inp == NULL)
843                 return EINVAL;
844         if (inp->inp_vflag & INP_IPV4) {
845                 error = in_setsockaddr(so, nam);
846                 if (error == 0)
847                         in6_sin_2_v4mapsin6_in_sock(nam);
848         } else
849         /* scope issues will be handled in in6_setsockaddr(). */
850         error = in6_setsockaddr(so, nam);
851
852         return error;
853 }
854
855 int
856 in6_mapped_peeraddr(struct socket *so, struct sockaddr **nam)
857 {
858         struct  inpcb *inp = so->so_pcb;
859         int     error;
860
861         if (inp == NULL)
862                 return EINVAL;
863         if (inp->inp_vflag & INP_IPV4) {
864                 error = in_setpeeraddr(so, nam);
865                 if (error == 0)
866                         in6_sin_2_v4mapsin6_in_sock(nam);
867         } else
868         /* scope issues will be handled in in6_setpeeraddr(). */
869         error = in6_setpeeraddr(so, nam);
870
871         return error;
872 }
873
874 void
875 in6_mapped_peeraddr_dispatch(netmsg_t msg)
876 {
877         int error;
878
879         error = in6_mapped_peeraddr(msg->base.nm_so, msg->peeraddr.nm_nam);
880         lwkt_replymsg(&msg->base.lmsg, error);
881 }
882
883 /*
884  * Pass some notification to all connections of a protocol
885  * associated with address dst.  The local address and/or port numbers
886  * may be specified to limit the search.  The "usual action" will be
887  * taken, depending on the ctlinput cmd.  The caller must filter any
888  * cmds that are uninteresting (e.g., no error in the map).
889  * Call the protocol specific routine (if any) to report
890  * any errors for each matching socket.
891  */
892 void
893 in6_pcbnotify(struct inpcbinfo *pcbinfo, struct sockaddr *dst, in_port_t fport,
894     const struct sockaddr *src, in_port_t lport, int cmd, int arg,
895     void (*notify) (struct inpcb *, int))
896 {
897         struct inpcb *inp, *marker;
898         struct sockaddr_in6 sa6_src, *sa6_dst;
899         u_int32_t flowinfo;
900
901         if ((unsigned)cmd >= PRC_NCMDS || dst->sa_family != AF_INET6)
902                 return;
903
904         sa6_dst = (struct sockaddr_in6 *)dst;
905         if (IN6_IS_ADDR_UNSPECIFIED(&sa6_dst->sin6_addr))
906                 return;
907
908         /*
909          * note that src can be NULL when we get notify by local fragmentation.
910          */
911         sa6_src = (src == NULL) ? sa6_any : *(const struct sockaddr_in6 *)src;
912         flowinfo = sa6_src.sin6_flowinfo;
913
914         /*
915          * Redirects go to all references to the destination,
916          * and use in6_rtchange to invalidate the route cache.
917          * Dead host indications: also use in6_rtchange to invalidate
918          * the cache, and deliver the error to all the sockets.
919          * Otherwise, if we have knowledge of the local port and address,
920          * deliver only to that socket.
921          */
922         if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
923                 fport = 0;
924                 lport = 0;
925                 bzero((caddr_t)&sa6_src.sin6_addr, sizeof(sa6_src.sin6_addr));
926
927                 if (cmd != PRC_HOSTDEAD)
928                         notify = in6_rtchange;
929         }
930         if (cmd != PRC_MSGSIZE)
931                 arg = inet6ctlerrmap[cmd];
932
933         marker = in_pcbmarker(mycpuid);
934
935         GET_PCBINFO_TOKEN(pcbinfo);
936
937         LIST_INSERT_HEAD(&pcbinfo->pcblisthead, marker, inp_list);
938         while ((inp = LIST_NEXT(marker, inp_list)) != NULL) {
939                 LIST_REMOVE(marker, inp_list);
940                 LIST_INSERT_AFTER(inp, marker, inp_list);
941
942                 if (inp->inp_flags & INP_PLACEMARKER)
943                         continue;
944
945                 if ((inp->inp_vflag & INP_IPV6) == 0)
946                         continue;
947                 /*
948                  * If the error designates a new path MTU for a destination
949                  * and the application (associated with this socket) wanted to
950                  * know the value, notify. Note that we notify for all
951                  * disconnected sockets if the corresponding application
952                  * wanted. This is because some UDP applications keep sending
953                  * sockets disconnected.
954                  * XXX: should we avoid to notify the value to TCP sockets?
955                  */
956                 if (cmd == PRC_MSGSIZE && (inp->inp_flags & IN6P_MTU) != 0 &&
957                     (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
958                      IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, &sa6_dst->sin6_addr))) {
959                         ip6_notify_pmtu(inp, (struct sockaddr_in6 *)dst, &arg);
960                 }
961
962                 /*
963                  * Detect if we should notify the error. If no source and
964                  * destination ports are specifed, but non-zero flowinfo and
965                  * local address match, notify the error. This is the case
966                  * when the error is delivered with an encrypted buffer
967                  * by ESP. Otherwise, just compare addresses and ports
968                  * as usual.
969                  */
970                 if (lport == 0 && fport == 0 && flowinfo &&
971                     inp->inp_socket != NULL &&
972                     flowinfo == (inp->in6p_flowinfo & IPV6_FLOWLABEL_MASK) &&
973                     IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, &sa6_src.sin6_addr))
974                         goto do_notify;
975                 else if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
976                                              &sa6_dst->sin6_addr) ||
977                          inp->inp_socket == 0 ||
978                          (lport && inp->inp_lport != lport) ||
979                          (!IN6_IS_ADDR_UNSPECIFIED(&sa6_src.sin6_addr) &&
980                           !IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
981                                               &sa6_src.sin6_addr)) ||
982                          (fport && inp->inp_fport != fport))
983                         continue;
984
985 do_notify:
986                 if (notify)
987                         (*notify)(inp, arg);
988         }
989         LIST_REMOVE(marker, inp_list);
990
991         REL_PCBINFO_TOKEN(pcbinfo);
992 }
993
994 /*
995  * Lookup a PCB based on the local address and port.
996  */
997 struct inpcb *
998 in6_pcblookup_local(struct inpcbportinfo *portinfo,
999     const struct in6_addr *laddr, u_int lport_arg, int wild_okay,
1000     struct ucred *cred)
1001 {
1002         struct inpcb *inp;
1003         int matchwild = 3, wildcard;
1004         u_short lport = lport_arg;
1005         struct inpcbporthead *porthash;
1006         struct inpcbport *phd;
1007         struct inpcb *match = NULL;
1008
1009         /*
1010          * If the porthashbase is shared across several cpus, it must
1011          * have been locked.
1012          */
1013         ASSERT_PORT_TOKEN_HELD(portinfo);
1014
1015         /*
1016          * Best fit PCB lookup.
1017          *
1018          * First see if this local port is in use by looking on the
1019          * port hash list.
1020          */
1021         porthash = &portinfo->porthashbase[
1022                                 INP_PCBPORTHASH(lport, portinfo->porthashmask)];
1023         LIST_FOREACH(phd, porthash, phd_hash) {
1024                 if (phd->phd_port == lport)
1025                         break;
1026         }
1027
1028         if (phd != NULL) {
1029                 /*
1030                  * Port is in use by one or more PCBs. Look for best
1031                  * fit.
1032                  */
1033                 LIST_FOREACH(inp, &phd->phd_pcblist, inp_portlist) {
1034                         wildcard = 0;
1035                         if ((inp->inp_vflag & INP_IPV6) == 0)
1036                                 continue;
1037                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr))
1038                                 wildcard++;
1039                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
1040                                 if (IN6_IS_ADDR_UNSPECIFIED(laddr))
1041                                         wildcard++;
1042                                 else if (!IN6_ARE_ADDR_EQUAL(
1043                                         &inp->in6p_laddr, laddr))
1044                                         continue;
1045                         } else {
1046                                 if (!IN6_IS_ADDR_UNSPECIFIED(laddr))
1047                                         wildcard++;
1048                         }
1049                         if (wildcard && !wild_okay)
1050                                 continue;
1051                         if (wildcard < matchwild &&
1052                             (cred == NULL ||
1053                              cred->cr_prison == 
1054                                         inp->inp_socket->so_cred->cr_prison)) {
1055                                 match = inp;
1056                                 matchwild = wildcard;
1057                                 if (wildcard == 0)
1058                                         break;
1059                                 else
1060                                         matchwild = wildcard;
1061                         }
1062                 }
1063         }
1064         return (match);
1065 }
1066
1067 void
1068 in6_pcbpurgeif0(struct inpcbinfo *pcbinfo, struct ifnet *ifp)
1069 {
1070         struct in6pcb *in6p, *marker;
1071         struct ip6_moptions *im6o;
1072         struct in6_multi_mship *imm, *nimm;
1073
1074         /*
1075          * We only need to make sure that we are in netisr0, where all
1076          * multicast operation happen.  We could check inpcbinfo which
1077          * does not belong to netisr0 by holding the inpcbinfo's token.
1078          * In this case, the pcbinfo must be able to be shared, i.e.
1079          * pcbinfo->infotoken is not NULL.
1080          */
1081         KASSERT(&curthread->td_msgport == netisr_cpuport(0),
1082             ("not in netisr0"));
1083         KASSERT(pcbinfo->cpu == 0 || pcbinfo->infotoken != NULL,
1084             ("pcbinfo could not be shared"));
1085
1086         /*
1087          * Get a marker for the current netisr (netisr0).
1088          *
1089          * It is possible that the multicast address deletion blocks,
1090          * which could cause temporary token releasing.  So we use
1091          * inpcb marker here to get a coherent view of the inpcb list.
1092          *
1093          * While, on the other hand, moptions are only added and deleted
1094          * in netisr0, so we would not see staled moption or miss moption
1095          * even if the token was released due to the blocking multicast
1096          * address deletion.
1097          */
1098         marker = in_pcbmarker(mycpuid);
1099
1100         GET_PCBINFO_TOKEN(pcbinfo);
1101
1102         LIST_INSERT_HEAD(&pcbinfo->pcblisthead, marker, inp_list);
1103         while ((in6p = LIST_NEXT(marker, inp_list)) != NULL) {
1104                 LIST_REMOVE(marker, inp_list);
1105                 LIST_INSERT_AFTER(in6p, marker, inp_list);
1106
1107                 if (in6p->in6p_flags & INP_PLACEMARKER)
1108                         continue;
1109                 im6o = in6p->in6p_moptions;
1110                 if ((in6p->inp_vflag & INP_IPV6) &&
1111                     im6o) {
1112                         /*
1113                          * Unselect the outgoing interface if it is being
1114                          * detached.
1115                          */
1116                         if (im6o->im6o_multicast_ifp == ifp)
1117                                 im6o->im6o_multicast_ifp = NULL;
1118
1119                         /*
1120                          * Drop multicast group membership if we joined
1121                          * through the interface being detached.
1122                          * XXX controversial - is it really legal for kernel
1123                          * to force this?
1124                          */
1125                         for (imm = im6o->im6o_memberships.lh_first;
1126                              imm != NULL; imm = nimm) {
1127                                 nimm = imm->i6mm_chain.le_next;
1128                                 if (imm->i6mm_maddr->in6m_ifp == ifp) {
1129                                         LIST_REMOVE(imm, i6mm_chain);
1130                                         in6_delmulti(imm->i6mm_maddr);
1131                                         kfree(imm, M_IPMADDR);
1132                                 }
1133                         }
1134                 }
1135         }
1136         LIST_REMOVE(marker, inp_list);
1137
1138         REL_PCBINFO_TOKEN(pcbinfo);
1139 }
1140
1141 /*
1142  * Check for alternatives when higher level complains
1143  * about service problems.  For now, invalidate cached
1144  * routing information.  If the route was created dynamically
1145  * (by a redirect), time to try a default gateway again.
1146  */
1147 void
1148 in6_losing(struct inpcb *in6p)
1149 {
1150         struct rtentry *rt;
1151         struct rt_addrinfo info;
1152
1153         if ((rt = in6p->in6p_route.ro_rt) != NULL) {
1154                 bzero((caddr_t)&info, sizeof(info));
1155                 info.rti_flags = rt->rt_flags;
1156                 info.rti_info[RTAX_DST] = rt_key(rt);
1157                 info.rti_info[RTAX_GATEWAY] = rt->rt_gateway;
1158                 info.rti_info[RTAX_NETMASK] = rt_mask(rt);
1159                 rt_missmsg(RTM_LOSING, &info, rt->rt_flags, 0);
1160                 if (rt->rt_flags & RTF_DYNAMIC) {
1161                         rtrequest(RTM_DELETE, rt_key(rt), rt->rt_gateway,
1162                             rt_mask(rt), rt->rt_flags, NULL);
1163                 }
1164                 in6p->in6p_route.ro_rt = NULL;
1165                 rtfree(rt);
1166                 /*
1167                  * A new route can be allocated
1168                  * the next time output is attempted.
1169                  */
1170         }
1171 }
1172
1173 /*
1174  * After a routing change, flush old routing
1175  * and allocate a (hopefully) better one.
1176  */
1177 void
1178 in6_rtchange(struct inpcb *inp, int error)
1179 {
1180         if (inp->in6p_route.ro_rt) {
1181                 rtfree(inp->in6p_route.ro_rt);
1182                 inp->in6p_route.ro_rt = 0;
1183                 /*
1184                  * A new route can be allocated the next time
1185                  * output is attempted.
1186                  */
1187         }
1188 }
1189
1190 /*
1191  * Lookup PCB in hash list.
1192  */
1193 struct inpcb *
1194 in6_pcblookup_hash(struct inpcbinfo *pcbinfo, struct in6_addr *faddr,
1195                    u_int fport_arg, struct in6_addr *laddr, u_int lport_arg,
1196                    int wildcard, struct ifnet *ifp)
1197 {
1198         struct inpcbhead *head;
1199         struct inpcb *inp;
1200         struct inpcb *jinp = NULL;
1201         u_short fport = fport_arg, lport = lport_arg;
1202         int faith;
1203
1204         if (faithprefix_p != NULL)
1205                 faith = (*faithprefix_p)(laddr);
1206         else
1207                 faith = 0;
1208
1209         /*
1210          * First look for an exact match.
1211          */
1212         head = &pcbinfo->hashbase[INP_PCBCONNHASH(faddr->s6_addr32[3] /* XXX */,
1213                                               fport,
1214                                               laddr->s6_addr32[3], /* XXX JH */
1215                                               lport,
1216                                               pcbinfo->hashmask)];
1217         LIST_FOREACH(inp, head, inp_hash) {
1218                 if ((inp->inp_vflag & INP_IPV6) == 0)
1219                         continue;
1220                 if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
1221                     IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
1222                     inp->inp_fport == fport &&
1223                     inp->inp_lport == lport) {
1224                         /*
1225                          * Found.
1226                          */
1227                         if (inp->inp_socket == NULL ||
1228                         inp->inp_socket->so_cred->cr_prison == NULL) {
1229                                 return (inp);
1230                         } else {
1231                                 if  (jinp == NULL)
1232                                         jinp = inp;
1233                         }
1234                 }
1235         }
1236         if (jinp != NULL)
1237                 return(jinp);
1238
1239         if (wildcard) {
1240                 struct inpcontainerhead *chead;
1241                 struct inpcontainer *ic;
1242                 struct inpcb *local_wild = NULL;
1243                 struct inpcb *jinp_wild = NULL;
1244                 struct sockaddr_in6 jsin6;
1245                 struct ucred *cred;
1246
1247                 /*
1248                  * Order of socket selection:
1249                  * 1. non-jailed, non-wild.
1250                  * 2. non-jailed, wild.
1251                  * 3. jailed, non-wild.
1252                  * 4. jailed, wild.
1253                  */
1254                 jsin6.sin6_family = AF_INET6;
1255                 chead = &pcbinfo->wildcardhashbase[INP_PCBWILDCARDHASH(lport,
1256                     pcbinfo->wildcardhashmask)];
1257
1258                 GET_PCBINFO_TOKEN(pcbinfo);
1259                 LIST_FOREACH(ic, chead, ic_list) {
1260                         inp = ic->ic_inp;
1261                         if (inp->inp_flags & INP_PLACEMARKER)
1262                                 continue;
1263
1264                         if (!(inp->inp_vflag & INP_IPV6))
1265                                 continue;
1266                         if (inp->inp_socket != NULL)
1267                                 cred = inp->inp_socket->so_cred;
1268                         else
1269                                 cred = NULL;
1270
1271                         if (cred != NULL && jailed(cred)) {
1272                                 if (jinp != NULL) {
1273                                         continue;
1274                                 } else {
1275                                         jsin6.sin6_addr = *laddr;
1276                                         if (!jailed_ip(cred->cr_prison,
1277                                             (struct sockaddr *)&jsin6))
1278                                                 continue;
1279                                 }
1280                         }
1281                         if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
1282                             inp->inp_lport == lport) {
1283                                 if (faith && (inp->inp_flags & INP_FAITH) == 0)
1284                                         continue;
1285                                 if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
1286                                                        laddr)) {
1287                                         if (cred != NULL && jailed(cred)) {
1288                                                 jinp = inp;
1289                                         } else {
1290                                                 REL_PCBINFO_TOKEN(pcbinfo);
1291                                                 return (inp);
1292                                         }
1293                                 } else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
1294                                         if (cred != NULL && jailed(cred))
1295                                                 jinp_wild = inp;
1296                                         else
1297                                                 local_wild = inp;
1298                                 }
1299                         }
1300                 }
1301                 REL_PCBINFO_TOKEN(pcbinfo);
1302
1303                 if (local_wild != NULL)
1304                         return (local_wild);
1305                 if (jinp != NULL)
1306                         return (jinp);
1307                 return (jinp_wild);
1308         }
1309
1310         /*
1311          * Not found.
1312          */
1313         return (NULL);
1314 }
1315
1316 void
1317 init_sin6(struct sockaddr_in6 *sin6, struct mbuf *m)
1318 {
1319         struct ip6_hdr *ip;
1320
1321         ip = mtod(m, struct ip6_hdr *);
1322         bzero(sin6, sizeof(*sin6));
1323         sin6->sin6_len = sizeof(*sin6);
1324         sin6->sin6_family = AF_INET6;
1325         sin6->sin6_addr = ip->ip6_src;
1326         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
1327                 sin6->sin6_addr.s6_addr16[1] = 0;
1328         sin6->sin6_scope_id =
1329                 (m->m_pkthdr.rcvif && IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
1330                 ? m->m_pkthdr.rcvif->if_index : 0;
1331
1332         return;
1333 }
1334
1335 static void
1336 in6_savefaddr(struct socket *so, const struct sockaddr *faddr)
1337 {
1338         struct sockaddr_in6 *sin6;
1339
1340         KASSERT(faddr->sa_family == AF_INET6,
1341             ("not AF_INET6 faddr %d", faddr->sa_family));
1342
1343         sin6 = kmalloc(sizeof(*sin6), M_SONAME, M_WAITOK | M_ZERO);
1344         sin6->sin6_family = AF_INET6;
1345         sin6->sin6_len = sizeof(*sin6);
1346
1347         sin6->sin6_port = ((const struct sockaddr_in6 *)faddr)->sin6_port;
1348         sin6->sin6_addr = ((const struct sockaddr_in6 *)faddr)->sin6_addr;
1349
1350         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
1351                 sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
1352         else
1353                 sin6->sin6_scope_id = 0;        /*XXX*/
1354         if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
1355                 sin6->sin6_addr.s6_addr16[1] = 0;
1356
1357         so->so_faddr = (struct sockaddr *)sin6;
1358 }
1359
1360 void
1361 in6_mapped_savefaddr(struct socket *so, const struct sockaddr *faddr)
1362 {
1363         if (faddr->sa_family == AF_INET) {
1364                 in_savefaddr(so, faddr);
1365                 in6_sin_2_v4mapsin6_in_sock(&so->so_faddr);
1366         } else {
1367                 in6_savefaddr(so, faddr);
1368         }
1369 }