1 /* $NetBSD: exphy.c,v 1.16 1999/04/23 04:24:32 thorpej Exp $ */
4 * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center, and by Frank van der Linden.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the NetBSD
22 * Foundation, Inc. and its contributors.
23 * 4. Neither the name of The NetBSD Foundation nor the names of its
24 * contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGE.
41 * Copyright (c) 1997 Manuel Bouyer. All rights reserved.
43 * Redistribution and use in source and binary forms, with or without
44 * modification, are permitted provided that the following conditions
46 * 1. Redistributions of source code must retain the above copyright
47 * notice, this list of conditions and the following disclaimer.
48 * 2. Redistributions in binary form must reproduce the above copyright
49 * notice, this list of conditions and the following disclaimer in the
50 * documentation and/or other materials provided with the distribution.
51 * 3. All advertising materials mentioning features or use of this software
52 * must display the following acknowledgement:
53 * This product includes software developed by Manuel Bouyer.
54 * 4. The name of the author may not be used to endorse or promote products
55 * derived from this software without specific prior written permission.
57 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
58 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
59 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
60 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
61 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
62 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
63 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
64 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
65 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
66 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
70 * driver for 3Com internal PHYs
73 #include <sys/param.h>
74 #include <sys/systm.h>
75 #include <sys/kernel.h>
76 #include <sys/socket.h>
77 #include <sys/module.h>
81 #include <net/if_media.h>
83 #include <dev/mii/mii.h>
84 #include <dev/mii/miivar.h>
85 #include <dev/mii/miidevs.h>
87 #include "miibus_if.h"
90 static const char rcsid[] =
91 "$FreeBSD: src/sys/dev/mii/exphy.c,v 1.4.2.2 2002/11/08 21:53:49 semenu Exp $";
94 static int exphy_probe __P((device_t));
95 static int exphy_attach __P((device_t));
96 static int exphy_detach __P((device_t));
98 static device_method_t exphy_methods[] = {
99 /* device interface */
100 DEVMETHOD(device_probe, exphy_probe),
101 DEVMETHOD(device_attach, exphy_attach),
102 DEVMETHOD(device_detach, exphy_detach),
103 DEVMETHOD(device_shutdown, bus_generic_shutdown),
107 static devclass_t exphy_devclass;
109 static driver_t exphy_driver = {
112 sizeof(struct mii_softc)
115 DRIVER_MODULE(xlphy, miibus, exphy_driver, exphy_devclass, 0, 0);
117 int exphy_service __P((struct mii_softc *, struct mii_data *, int));
118 void exphy_reset __P((struct mii_softc *));
120 static int exphy_probe(dev)
123 struct mii_attach_args *ma;
126 ma = device_get_ivars(dev);
127 parent = device_get_parent(device_get_parent(dev));
130 * Argh, 3Com PHY reports oui == 0 model == 0!
132 if ((MII_OUI(ma->mii_id1, ma->mii_id2) != 0 ||
133 MII_MODEL(ma->mii_id2) != 0) &&
134 (MII_OUI(ma->mii_id1, ma->mii_id2) != MII_OUI_BROADCOM ||
135 MII_MODEL(ma->mii_id2) != MII_MODEL_BROADCOM_3c905Cphy))
139 * Make sure the parent is an `ex'.
141 if (strcmp(device_get_name(parent), "xl") != 0)
144 if (MII_OUI(ma->mii_id1, ma->mii_id2) == 0)
145 device_set_desc(dev, "3Com internal media interface");
147 device_set_desc(dev, MII_STR_BROADCOM_3c905Cphy);
152 static int exphy_attach(dev)
155 struct mii_softc *sc;
156 struct mii_attach_args *ma;
157 struct mii_data *mii;
159 sc = device_get_softc(dev);
160 ma = device_get_ivars(dev);
161 sc->mii_dev = device_get_parent(dev);
162 mii = device_get_softc(sc->mii_dev);
165 * The 3Com PHY can never be isolated, so never allow non-zero
168 if (mii->mii_instance != 0) {
169 device_printf(dev, "ignoring this PHY, non-zero instance\n");
173 LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
175 sc->mii_inst = mii->mii_instance;
176 sc->mii_phy = ma->mii_phyno;
177 sc->mii_service = exphy_service;
181 sc->mii_flags |= MIIF_NOISOLATE;
183 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
185 #if 0 /* See above. */
186 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
190 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
191 BMCR_LOOP|BMCR_S100);
195 sc->mii_capabilities =
196 PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
197 device_printf(dev, " ");
198 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
199 printf("no media present");
201 mii_add_media(mii, sc->mii_capabilities,
205 MIIBUS_MEDIAINIT(sc->mii_dev);
209 static int exphy_detach(dev)
212 struct mii_softc *sc;
213 struct mii_data *mii;
215 sc = device_get_softc(dev);
216 mii = device_get_softc(device_get_parent(dev));
217 mii_phy_auto_stop(sc);
219 LIST_REMOVE(sc, mii_list);
225 exphy_service(sc, mii, cmd)
226 struct mii_softc *sc;
227 struct mii_data *mii;
230 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
233 * We can't isolate the 3Com PHY, so it has to be the only one!
235 if (IFM_INST(ife->ifm_media) != sc->mii_inst)
236 panic("exphy_service: can't isolate 3Com PHY");
244 * If the interface is not up, don't do anything.
246 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
249 switch (IFM_SUBTYPE(ife->ifm_media)) {
252 * If we're already in auto mode, just return.
254 if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN)
256 (void) mii_phy_auto(sc, 1);
260 * XXX Not supported as a manual setting right now.
265 * BMCR data is stored in the ifmedia entry.
267 PHY_WRITE(sc, MII_ANAR,
268 mii_anar(ife->ifm_media));
269 PHY_WRITE(sc, MII_BMCR, ife->ifm_data);
275 * Only used for autonegotiation.
277 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
281 * Is the interface even up?
283 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
287 * The 3Com PHY's autonegotiation doesn't need to be
288 * kicked; it continues in the background.
293 /* Update the media status. */
296 /* Callback if something changed. */
297 if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) {
298 MIIBUS_STATCHG(sc->mii_dev);
299 sc->mii_active = mii->mii_media_active;
306 struct mii_softc *sc;
312 * XXX 3Com PHY doesn't set the BMCR properly after
313 * XXX reset, which breaks autonegotiation.
315 PHY_WRITE(sc, MII_BMCR, BMCR_S100|BMCR_AUTOEN|BMCR_FDX);