1 # Buildsheet autogenerated by ravenadm tool -- Do not edit.
6 KEYWORDS= sysutils audio
8 SDESC[standard]= CD/DVD/BluRay command line recording software
9 HOMEPAGE= http://cdrecord.org/
13 SITES[main]= SF/cdrtools
14 DISTFILE[1]= cdrtools-3.01.tar.gz:main
16 SPKGS[standard]= complete
22 OPTIONS_AVAILABLE= none
23 OPTIONS_STANDARD= none
25 EXRUN[ogg]= vorbis-tools:primary:standard
26 EXRUN[mp3]= lame:complete:standard
30 LICENSE= CDDL:primary GPLv2:primary LGPL21:primary
32 LICENSE_TERMS= primary:{{WRKSRC}}/COPYING
33 LICENSE_FILE= CDDL:{{WRKSRC}}/CDDL.Schily.txt
34 GPLv2:{{WRKSRC}}/GPL-2.0.txt
35 LGPL21:{{WRKSRC}}/LGPL-2.1.txt
36 BSD2CLAUSE:{{WRKSRC}}/libfile/LEGAL.NOTICE
39 FPC_EQUIVALENT= sysutils/cdrtools
43 INS_BASE="{{LOCALBASE}}"
44 DEFOSINCDIRS="{{LOCALBASE}}/include"
45 LDPATH="-L{{LOCALBASE}}/lib -Wl,-rpath,{{LOCALBASE}}/lib"
49 (cd ${WRKSRC}/RULES && \
50 ${LN} -sf i386-freebsd-cc.rul amd64-freebsd-cc.rul && \
51 ${LN} -sf i386-freebsd-cc.rul x86_64-dragonfly-cc.rul && \
52 ${LN} -sf i586-linux-cc.rul x86_64-linux-cc.rul)
53 ${REINPLACE_CMD} -e 's|.(C_ARCH)|gcc|; /VOLMGT/d' \
54 ${WRKSRC}/RULES/i86pc-sunos5-gcc.rul
55 ${RM} ${WRKSRC}/TARGETS/55scgskeleton ${WRKSRC}/TARGETS/85man
56 ${RM} ${WRKSRC}/TARGETS/55rscsi
57 (cd ${WRKSRC} && ${REINPLACE_CMD} -e \
58 's|\/opt\/schily|${PREFIX}|g; \
59 s|\/usr\/local|${PREFIX}|g; s|\/etc\/default|${PREFIX}\/etc|g; \
60 s|\/var\/adm\/messages|\/var\/run\/dmesg.boot|g; \
61 s|^CDDA2WAV=|&${PREFIX}\/bin\/|g; \
62 s|^MP_CODER=|&${LOCALBASE}\/bin\/|g' ${RPTARGETS})
63 ${MV} -f ${WRKSRC}/libparanoia/cdda_paranoia.h \
64 ${WRKSRC}/libparanoia/js_cdda_paranoia.h
65 (cd ${WRKSRC} && ${REINPLACE_CMD} -e \
66 's|cdda_paranoia\.h|js_cdda_paranoia.h|g' ${RPTARGETS2})
67 ${REINPLACE_CMD} -e '/LDPATH=/d; /DEFOSINCDIRS=/d' \
68 ${WRKSRC}/DEFAULTS/Defaults.${OPSYS:tl:S/sunos/sunos5/}
72 ${WRKSRC}/cdda2wav/cdda2mp3 \
73 ${WRKSRC}/cdda2wav/cdda2ogg \
74 ${STAGEDIR}${PREFIX}/bin
76 ${WRKSRC}/btcflash/OBJ/*-cc/btcflash \
77 ${WRKSRC}/cdda2wav/OBJ/*-cc/cdda2wav \
78 ${WRKSRC}/mkisofs/diag/OBJ/*-cc/devdump \
79 ${WRKSRC}/mkisofs/diag/OBJ/*-cc/isodebug \
80 ${WRKSRC}/mkisofs/diag/OBJ/*-cc/isodump \
81 ${WRKSRC}/mkisofs/diag/OBJ/*-cc/isoinfo \
82 ${WRKSRC}/mkisofs/diag/OBJ/*-cc/isovfy \
83 ${WRKSRC}/mkisofs/OBJ/*-cc/mkisofs \
84 ${WRKSRC}/readcd/OBJ/*-cc/readcd \
85 ${WRKSRC}/scgcheck/OBJ/*-cc/scgcheck \
86 ${WRKSRC}/cdrecord/OBJ/*-cc/cdrecord \
87 ${STAGEDIR}${PREFIX}/bin
88 ${LN} -sf mkisofs ${STAGEDIR}${PREFIX}/bin/mkhybrid
89 ${LN} -sf cdda2wav ${STAGEDIR}${PREFIX}/bin/list_audio_tracks
91 ${WRKSRC}/btcflash/btcflash.1 \
92 ${WRKSRC}/cdda2wav/cdda2wav.1 \
93 ${WRKSRC}/cdrecord/cdrecord.1 \
94 ${WRKSRC}/readcd/readcd.1 \
95 ${WRKSRC}/cdda2wav/cdda2ogg.1 \
96 ${WRKSRC}/scgcheck/scgcheck.1 \
97 ${STAGEDIR}${MANPREFIX}/man/man1
98 ${INSTALL_MAN} ${WRKSRC}/cdda2wav/cdda2ogg.1 \
99 ${STAGEDIR}${MANPREFIX}/man/man1/cdda2mp3.1
101 ${WRKSRC}/mkisofs/mkisofs.8 \
102 ${WRKSRC}/mkisofs/diag/isoinfo.8 \
103 ${STAGEDIR}${MANPREFIX}/man/man8
104 ${INSTALL_DATA} ${WRKSRC}/cdrecord/cdrecord.dfl \
105 ${STAGEDIR}${PREFIX}/etc/cdrecord.sample
107 ${MKDIR} ${STAGEDIR}${PREFIX}/lib/siconv
108 (cd ${WRKSRC}/libsiconv/tables && ${INSTALL_DATA} ${SICONVTABLES} \
109 ${STAGEDIR}${PREFIX}/lib/siconv)
110 # Documentation package
112 ${STAGEDIR}${STD_DOCDIR}/cdda2wav \
113 ${STAGEDIR}${STD_DOCDIR}/cdrecord \
114 ${STAGEDIR}${STD_DOCDIR}/mkisofs
115 (cd ${WRKSRC} && ${INSTALL_DATA} ${DOCS} ${STAGEDIR}${STD_DOCDIR})
116 (cd ${WRKSRC}/cdda2wav && ${INSTALL_DATA} ${CDDA2WAVDOCS} \
117 ${STAGEDIR}${STD_DOCDIR}/cdda2wav)
118 (cd ${WRKSRC}/cdrecord && ${INSTALL_DATA} ${CDRECORDDOCS} \
119 ${STAGEDIR}${STD_DOCDIR}/cdrecord)
120 (cd ${WRKSRC}/mkisofs && ${INSTALL_DATA} ${MKISOFSDOCS} \
121 ${STAGEDIR}${STD_DOCDIR}/mkisofs)
123 [FILE:962:descriptions/desc.primary]
124 The cdrtools software includes tools to create and/or extract
125 ISO-9660 filesystems, verify their integrity, and write them to
128 This package contains the following programs:
129 - btcflash (a firmware flash utility for BTC DRW1008 DVD+/-RW recorder)
130 - cdda2wav (a digital CD audio extraction program)
131 - cdrecord (a CD/DVD/BluRay recording program)
132 - devdump (dump a device or file in hex)
133 - isodebug (show debug info contained in an ISO-9660 image)
134 - isodump (dump a device or file based on ISO-9660)
135 - isoinfo (analyze or list an ISO-9660 image)
136 - isovfy (verify an ISO-9660 image)
137 - mkisofs (an ISO-9660 filesystem image creator)
138 - mkhybrid (an ISO-9660/HFS filesystem image creator)
140 - readcd (a data CD reading and recording program)
141 May be used to write to DVD-RAM and to copy Solaris boot CD's.
142 - scgcheck (checks and validates the ABI of libscg)
143 - rscsi (daemon providing access to local SCSI-devices over the network)
146 [FILE:245:descriptions/desc.mp3]
147 The cdrtools software includes tools to create and/or extract
148 ISO-9660 filesystems, verify their integrity, and write them to
151 This package contains the following programs:
152 - cdda2mp3 (a digital CD audio extraction program to mp3 format)
155 [FILE:245:descriptions/desc.ogg]
156 The cdrtools software includes tools to create and/or extract
157 ISO-9660 filesystems, verify their integrity, and write them to
160 This package contains the following programs:
161 - cdda2ogg (a digital CD audio extraction program to ogg format)
165 a9261273b5a1a2da51bebc70584e63291b28ac6836237a4963865c50a9a026bb 2652621 cdrtools-3.01.tar.gz
168 [FILE:734:manifests/plist.primary]
169 @sample etc/cdrecord.sample
244 [FILE:42:manifests/plist.mp3]
246 share/man/man1/cdda2mp3.1.gz
249 [FILE:42:manifests/plist.ogg]
251 share/man/man1/cdda2ogg.1.gz
254 [FILE:661:manifests/plist.docs]
258 share/doc/cdrtools/cdda2wav/
266 share/doc/cdrtools/cdrecord/
282 share/doc/cdrtools/mkisofs/
301 [FILE:3127:patches/patch-RULES__cc-gcc.rul]
302 ###########################################################################
303 # This patch was contributed by Marius Strobl.
304 ###########################################################################
305 # The contents of this file are subject to the terms of the
306 # Common Development and Distribution License, Version 1.0 only
307 # (the "License"). You may not use this file except in compliance
310 # See the file CDDL.Schily.txt in this distribution for details.
312 # When distributing Covered Code, include this CDDL HEADER in each
313 # file and include the License file CDDL.Schily.txt from this distribution.
314 ###########################################################################
315 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
316 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
317 ###########################################################################
319 --- RULES/cc-gcc.rul.orig 2014-03-31 15:52:08 UTC
325 -GCC_OPTXX= $(GCC_OPT$(C_ARCH:gcc%=%))
328 CPPFLAGS= -DSCHILY_BUILD $(CPPOPTS) $(CPPOPTX) $(OSINCDIRS:%=-I%) $(OSDEFS) $(OSDEFSX)
329 -CFLAGS= $(COPTS) $(CWARNOPTS) $(COPTOPT) $(GCCOPTOPT) $(COPTX)
330 -C++FLAGS= $(C++OPTS) $(C++WARNOPTS) $(C++OPTOPT) $(G++OPTOPT) $(C++OPTX)
332 +CFLAGS= $(COPTS) $(CWARNOPTS) $(XCFLAGS) $(GCCOPTOPT) $(COPTX)
333 +C++FLAGS= $(C++OPTS) $(C++WARNOPTS) $(CXXFLAGS) $(G++OPTOPT) $(C++OPTX)
335 CPPOPTS= -I$(ARCHDIR) -I$(OINCSDIR) $(INCDIRS:%=-I%) $(INCDIRSX:%=-I%)
337 @@ -36,12 +37,10 @@ COPTS= $(GCC_OPTXX)
338 CWOPTS= -Wall -Wtraditional
339 CWOPTS= -Wall -Wno-unknown-pragmas \
340 -Wshadow -Wmissing-prototypes -Wstrict-prototypes
344 C++OPTS= $(GCC_OPTXX)
346 -C++OPTOPT= $(COPTOPT)
350 @@ -61,28 +60,18 @@ LNDYNLIB= @$(RM) $(RM_FORCE) $(PTARGET_B
354 -__CC_COM= $(_UNIQ)$(CC)
355 -___CC_COM= $(__CC_COM:$(_UNIQ)=$(CC_COM_DEF))
356 -CC_COM= $(___CC_COM:$(_UNIQ)%=%)
358 -__CC++_COM= $(_UNIQ)$(CCC)
359 -___CC++_COM= $(__CC++_COM:$(_UNIQ)=$(CC++_COM_DEF))
360 -CC++_COM= $(___CC++_COM:$(_UNIQ)%=%)
365 -CCC= $(CC++_COM_DEF)
367 -CCCC= @echo " ==> COMPILING \"$@\""; $(CC_COM) $(GCC_OPTXX)
368 -CC++ = @echo " ==> COMPILING \"$@\""; $(CC++_COM) $(GCC_OPTXX)
369 -LDCC= @echo " ==> LINKING \"$@\""; $(CC_COM) $(GCC_OPTXX)
370 -LDCC++ = @echo " ==> LINKING \"$@\""; $(CC++_COM) $(GCC_OPTXX)
371 -DYNLD= @echo " ==> LINKING dynamic library \"$@\""; $(CC_COM) $(GCC_OPTXX)
372 -DYNLDC++ = @echo " ==> LINKING dynamic library \"$@\""; $(CC++_COM) $(GCC_OPTXX)
379 +LDCC++ = $(CC++_COM)
381 +DYNLDC++ = $(CC++_COM)
384 -MKDEP= @echo " ==> MAKING DEPENDENCIES \"$@\""; $(RMDEP); $(CC_COM) $(GCC_OPTXX) -M
387 -MKC++DEP= @echo " ==> MAKING DEPENDENCIES \"$@\""; $(RMDEP); $(CC++_COM) $(GCC_OPTXX) -M
388 +MKC++DEP= $(CC++_COM) -M
392 [FILE:241:patches/patch-btcflash__btcflash.1]
393 --- btcflash/btcflash.1.orig 2014-12-03 21:04:39 UTC
394 +++ btcflash/btcflash.1
395 @@ -346,7 +346,6 @@ using an account that has been created w
405 [FILE:1382:patches/patch-cdrecord__README.rscsi]
406 --- cdrecord/README.rscsi.orig 2004-05-19 14:12:05 UTC
407 +++ cdrecord/README.rscsi
408 @@ -18,24 +18,21 @@ There are three possible ways to control
409 NOTE: In this case, rscsi must be installed suid root.
410 **** This is the preferred method ****
412 -To enable remote SCSI via the login shell method you should do the following:
414 - - Add an entry to /etc/passwd in the form:
415 + The FreeBSD port automatically installs the rscsi binary suid
416 + root and creates the user "rscsi".
418 - rscsi:x:1999:1000:Tape:/export/home/rscsi:/opt/schily/sbin/rscsi
420 - (modify this according to your OS). And don't forget to
421 - modify /etc/shadow the way it needs to be on your OS.
422 +To enable remote SCSI via the login shell method you should do the following:
424 - - Create a home directory for this user and add a .rhosts file
425 - to allow access to all users you like.
426 + - Make sure that there is an entry for rshd(8) in /etc/inetd.conf
427 + and inetd(8) is running.
429 - - Install rscsi suid root into /opt/schily/sbin
430 + - Edit /usr/local/rscsi/.rhosts to allow access to all users you
433 - - Install a file /etc/default/rscsi and define access rights.
434 + - Edit /usr/local/etc/rscsi and define access rights.
435 Without this file, rscsi will not work at all.
437 - The template for this file is: rscsi/rscsi.dfl
438 + The template for this file is: /usr/local/etc/rscsi.sample
444 [FILE:1183:patches/patch-cdrecord__cdrecord.1]
445 ###########################################################################
446 # This patch was contributed by Marius Strobl.
447 ###########################################################################
448 # The contents of this file are subject to the terms of the
449 # Common Development and Distribution License, Version 1.0 only
450 # (the "License"). You may not use this file except in compliance
453 # See the file CDDL.Schily.txt in this distribution for details.
455 # When distributing Covered Code, include this CDDL HEADER in each
456 # file and include the License file CDDL.Schily.txt from this distribution.
457 ###########################################################################
458 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
459 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
460 ###########################################################################
462 --- cdrecord/cdrecord.1.orig 2014-12-03 19:13:13 UTC
463 +++ cdrecord/cdrecord.1
464 @@ -3113,8 +3113,6 @@ There must be at least one track per fil
475 [FILE:1997:patches/patch-cdrecord__cdrecord.dfl]
476 --- cdrecord/cdrecord.dfl.orig 2014-01-03 21:59:27 UTC
477 +++ cdrecord/cdrecord.dfl
479 # This file is /etc/default/cdrecord
480 # It contains defaults that are used if no command line option
481 # or environment is present.
484 # The default device, if not specified elswhere
485 # Note that since Sommer 2006, cdrecord by default searches for a
486 # single CD-ROM device. You should set CDR_DEVICE= together with
488 # one CR-ROM drive in your system.
495 # The default speed (speed=), if not specified elswhere
497 # Note that newer cdrecord versions do not default
498 # to speed=1. For MMC compliant drives, the default
499 # is to write at maximum speed, so it in general does
500 -# not make sense to set up a default speed in /etc/default/cdrecord
501 +# not make sense to set up a default speed in /etc/default/cdrecord
506 # Linux and Solaris have problems with bigger transfer sizes.
507 # If you are on FreeBSD, it is recommened to set CDR_TRANSFERSIZE=126k
509 -#CDR_TRANSFERSIZE=32k
510 +CDR_TRANSFERSIZE=126k
513 # The following definitions allow abstract device names.
516 # drive name device speed fifosize driveropts transfersize
518 -my-default= 1,0,0 -1 -1 burnfree 63k
519 -sol-default= USCSI:1,0,0 -1 -1 burnfree
520 -ricoh-u= USCSI:0,2,0 -1 -1 burnfree
521 -teac= 1,3,0 -1 -1 ""
522 -teac-max-ts= 1,3,0 -1 -1 "" 32k
523 -panasonic= 1,4,0 -1 -1 ""
524 -plextor= 1,4,0 -1 -1 ""
525 -sanyo= 1,4,0 -1 -1 burnfree
526 -yamaha= 1,5,0 -1 -1 ""
527 -cdrom= 0,6,0 2 1m ""
528 -remote= REMOTE:rscsi@somehost:1,0,0 16 16m burnfree
529 +#my-default= 1,0,0 -1 -1 burnfree 63k
530 +#sol-default= USCSI:1,0,0 -1 -1 burnfree
531 +#ricoh-u= USCSI:0,2,0 -1 -1 burnfree
532 +#teac= 1,3,0 -1 -1 ""
533 +#teac-max-ts= 1,3,0 -1 -1 "" 32k
534 +#panasonic= 1,4,0 -1 -1 ""
535 +#plextor= 1,4,0 -1 -1 ""
536 +#sanyo= 1,4,0 -1 -1 burnfree
537 +#yamaha= 1,5,0 -1 -1 ""
538 +#cdrom= 0,6,0 2 1m ""
539 +#remote= REMOTE:rscsi@somehost:1,0,0 16 16m burnfree
542 [FILE:1161:patches/patch-inc_avoffset.c]
543 ###########################################################################
544 # This patch was contributed by Dimitry Andric.
545 ###########################################################################
546 # The contents of this file are subject to the terms of the
547 # Common Development and Distribution License, Version 1.0 only
548 # (the "License"). You may not use this file except in compliance
551 # See the file CDDL.Schily.txt in this distribution for details.
553 # When distributing Covered Code, include this CDDL HEADER in each
554 # file and include the License file CDDL.Schily.txt from this distribution.
555 ###########################################################################
556 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
557 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
558 ###########################################################################
560 --- inc/avoffset.c.orig 2011-11-28 19:28:41 UTC
562 @@ -60,7 +60,7 @@ main(ac, av)
565 #ifdef HAVE_SCANSTACK
566 - register struct frame *fp;
567 + volatile struct frame *fp;
573 [FILE:1375:patches/patch-inc_getfp.c]
574 ###########################################################################
575 # This patch was contributed by Dimitry Andric.
576 ###########################################################################
577 # The contents of this file are subject to the terms of the
578 # Common Development and Distribution License, Version 1.0 only
579 # (the "License"). You may not use this file except in compliance
582 # See the file CDDL.Schily.txt in this distribution for details.
584 # When distributing Covered Code, include this CDDL HEADER in each
585 # file and include the License file CDDL.Schily.txt from this distribution.
586 ###########################################################################
587 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
588 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
589 ###########################################################################
591 --- inc/getfp.c.orig 2008-06-13 22:32:03 UTC
595 EXPORT void **___fpoff __PR((char *cp));
598 +EXPORT __attribute__ ((noinline)) void **
602 @@ -69,7 +69,7 @@ getfp()
603 * We need this function to fool GCCs check for returning addresses
604 * from outside the functions local address space.
607 +EXPORT __attribute__ ((noinline)) void **
613 [FILE:598:patches/patch-include__schily__sha2.h]
614 --- include/schily/sha2.h.orig 2010-08-27 10:41:30 UTC
615 +++ include/schily/sha2.h
616 @@ -104,10 +104,12 @@ extern char *SHA256Data __PR((const UIn
619 extern void SHA384Init __PR((SHA2_CTX *));
620 +#ifndef HAVE_PRAGMA_WEAK
621 extern void SHA384Transform __PR((UInt64_t state[8],
622 const UInt8_t [SHA384_BLOCK_LENGTH]));
623 extern void SHA384Update __PR((SHA2_CTX *, const UInt8_t *, size_t));
624 extern void SHA384Pad __PR((SHA2_CTX *));
626 extern void SHA384Final __PR((UInt8_t [SHA384_DIGEST_LENGTH],
628 extern char *SHA384End __PR((SHA2_CTX *, char *));
631 [FILE:423:patches/patch-libscg_scsihack.c]
632 --- libscg/scsihack.c.orig 2013-07-30 18:37:09 UTC
633 +++ libscg/scsihack.c
634 @@ -138,8 +138,7 @@ EXPORT scg_ops_t scg_std_ops = {
638 -#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || \
639 - defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__)
640 +#if defined(__NetBSD__) || defined(__OpenBSD__)
641 #define SCSI_IMPL /* We have a SCSI implementation for *BSD */
643 #include "scsi-bsd.c"
646 [FILE:1387:patches/patch-libschily_getfp.c]
647 ###########################################################################
648 # This patch was contributed by Dimitry Andric.
649 ###########################################################################
650 # The contents of this file are subject to the terms of the
651 # Common Development and Distribution License, Version 1.0 only
652 # (the "License"). You may not use this file except in compliance
655 # See the file CDDL.Schily.txt in this distribution for details.
657 # When distributing Covered Code, include this CDDL HEADER in each
658 # file and include the License file CDDL.Schily.txt from this distribution.
659 ###########################################################################
660 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
661 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
662 ###########################################################################
664 --- libschily/getfp.c.orig 2008-06-13 22:32:03 UTC
665 +++ libschily/getfp.c
668 EXPORT void **___fpoff __PR((char *cp));
671 +EXPORT __attribute__ ((noinline)) void **
675 @@ -69,7 +69,7 @@ getfp()
676 * We need this function to fool GCCs check for returning addresses
677 * from outside the functions local address space.
680 +EXPORT __attribute__ ((noinline)) void **
686 [FILE:546:patches/patch-mkisofs__mkisofs.8]
687 --- mkisofs/mkisofs.8.orig 2014-12-03 21:21:11 UTC
688 +++ mkisofs/mkisofs.8
689 @@ -2674,7 +2674,7 @@ but is kept to be compatible with
692 file is almost identical to the
695 file used by the Linux
697 command - the routines for reading and decoding the
698 @@ -2713,7 +2713,7 @@ l l l l .
701 The format of the file is described in the
704 man page. The only difference here is that for each entry in the magic file, the
706 for the initial offset
709 [FILE:1130:patches/patch-readcd__readcd.1]
710 ###########################################################################
711 # This patch was contributed by Marius Strobl.
712 ###########################################################################
713 # The contents of this file are subject to the terms of the
714 # Common Development and Distribution License, Version 1.0 only
715 # (the "License"). You may not use this file except in compliance
718 # See the file CDDL.Schily.txt in this distribution for details.
720 # When distributing Covered Code, include this CDDL HEADER in each
721 # file and include the License file CDDL.Schily.txt from this distribution.
722 ###########################################################################
723 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
724 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
725 ###########################################################################
727 --- readcd/readcd.1.orig 2015-03-25 19:14:30 UTC
729 @@ -604,8 +604,6 @@ login shell.
740 [FILE:695:patches/patch-rscsi__rscsi.dfl]
741 --- rscsi/rscsi.dfl.orig 2005-08-09 13:19:20 UTC
744 # Each USER= entry adds the listed user to the users who may run rscsi
746 # A typical passwd entry looks like this:
747 -# rscsi:x:1999:1000:Remote SCSI:/export/home/rscsi:/opt/schily/sbin/rscsi
748 +# rscsi:*:99:99::0:0:Remote SCSI:/usr/local/rscsi:/opt/schily/sbin/rscsi
750 -# Add entries for all valid remote users to /export/home/rscsi/.rhosts
751 +# Add entries for all valid remote users to /usr/local/rscsi/.rhosts
753 # USER= entries are checked with a pattern matcher. USER=* matches all users.
759 # Each ACCESS= entry adds a target or group of targets to the list of visible
762 [FILE:1173:patches/patch-scgcheck__scgcheck.1]
763 ###########################################################################
764 # This patch was contributed by Marius Strobl.
765 ###########################################################################
766 # The contents of this file are subject to the terms of the
767 # Common Development and Distribution License, Version 1.0 only
768 # (the "License"). You may not use this file except in compliance
771 # See the file CDDL.Schily.txt in this distribution for details.
773 # When distributing Covered Code, include this CDDL HEADER in each
774 # file and include the License file CDDL.Schily.txt from this distribution.
775 ###########################################################################
776 # The file CDDL.Schily.txt can be found in the original cdrtools tarball,
777 # which is mirrored at ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/.
778 ###########################################################################
780 --- scgcheck/scgcheck.1.orig 2014-12-03 21:20:04 UTC
781 +++ scgcheck/scgcheck.1
782 @@ -269,8 +269,7 @@ Specify the log file to be used instead
794 [FILE:1477:files/special.mk]
795 DOCS= README.FreeBSD README.mkisofs
796 CDDA2WAVDOCS= FAQ Frontends HOWTOUSE OtherProgs README THANKS TODO
797 CDRECORDDOCS= README README.ATAPI README.DiskT@2 README.WORM README.audio \
798 README.cdplus README.cdrw README.cdtext README.clone \
799 README.copy README.multi README.raw README.rscsi README.sony \
801 MKISOFSDOCS= README README.compression README.eltorito README.graft_dirs \
802 README.hfs_boot README.hfs_magic README.hide README.joliet \
803 README.macosx README.mkhybrid README.prep_boot README.rootinfo \
804 README.session README.sort README.sparcboot README.sunx86boot
805 SICONVTABLES= cp10000 cp10006 cp10007 cp10029 cp10079 cp10081 cp1250 \
806 cp1251 cp1252 cp1253 cp1254 cp1255 cp1256 cp1257 cp1258 \
807 cp437 cp737 cp775 cp850 cp852 cp855 cp857 cp860 cp861 \
808 cp862 cp863 cp864 cp865 cp866 cp869 cp874 iso8859-1 \
809 iso8859-10 iso8859-11 iso8859-13 iso8859-14 iso8859-15 \
810 iso8859-16 iso8859-2 iso8859-3 iso8859-4 iso8859-5 \
811 iso8859-6 iso8859-7 iso8859-8 iso8859-9 koi8-r koi8-u
812 RPTARGETS= btcflash/btcflash.1 cdda2wav/cdda2mp3 cdda2wav/cdda2ogg \
813 cdda2wav/cdda2ogg.1 cdda2wav/cdda2wav.1 cdrecord/README.rscsi \
814 cdrecord/cdrecord.1 cdrecord/cdrecord.dfl include/schily/deflts.h \
815 libcdrdeflt/cdrdeflt.c librscg/scsi-remote.c readcd/readcd.1 \
816 rscsi/rscsi.1 rscsi/rscsi.c rscsi/rscsi.dfl scgcheck/scgcheck.1
817 RPTARGETS2= cdda2wav/cdda2wav.c cdda2wav/global.h libparanoia/gap.c \
818 libparanoia/overlap.c libparanoia/p_block.c libparanoia/paranoia.c