HAMMER Utilities: enhanced show, timeout option

[dragonfly.git] / sys / vfs / hammer / hammer_inode.c

/*
 * Copyright (c) 2007-2008 The DragonFly Project.  All rights reserved.
 * 
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@backplane.com>
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * $DragonFly: src/sys/vfs/hammer/hammer_inode.c,v 1.50 2008/05/04 09:06:45 dillon Exp $
 */

#include "hammer.h"
#include <vm/vm_extern.h>
#include <sys/buf.h>
#include <sys/buf2.h>

static int hammer_unload_inode(struct hammer_inode *ip);
static void hammer_flush_inode_core(hammer_inode_t ip, int flags);
static int hammer_setup_child_callback(hammer_record_t rec, void *data);
static int hammer_setup_parent_inodes(hammer_record_t record);

/*
 * The kernel is not actively referencing this vnode but is still holding
 * it cached.
 *
 * This is called from the frontend.
 */
int
hammer_vop_inactive(struct vop_inactive_args *ap)
{
	struct hammer_inode *ip = VTOI(ap->a_vp);

	/*
	 * Degenerate case
	 */
	if (ip == NULL) {
		vrecycle(ap->a_vp);
		return(0);
	}

	/*
	 * If the inode no longer has visibility in the filesystem and is
	 * fairly clean, try to recycle it immediately.  This can deadlock
	 * in vfsync() if we aren't careful.
	 */
	hammer_inode_unloadable_check(ip, 0);
	if (ip->flags & HAMMER_INODE_MODMASK)
		hammer_flush_inode(ip, 0);
	else if (ip->ino_rec.ino_nlinks == 0)
		vrecycle(ap->a_vp);
	return(0);
}

/*
 * Release the vnode association.  This is typically (but not always)
 * the last reference on the inode.
 *
 * Once the association is lost we are on our own with regards to
 * flushing the inode.
 */
int
hammer_vop_reclaim(struct vop_reclaim_args *ap)
{
	struct hammer_inode *ip;
	struct vnode *vp;

	vp = ap->a_vp;

	if ((ip = vp->v_data) != NULL) {
		vp->v_data = NULL;
		ip->vp = NULL;
		hammer_rel_inode(ip, 1);
	}
	return(0);
}

/*
 * Return a locked vnode for the specified inode.  The inode must be
 * referenced but NOT LOCKED on entry and will remain referenced on
 * return.
 *
 * Called from the frontend.
 */
int
hammer_get_vnode(struct hammer_inode *ip, struct vnode **vpp)
{
	struct vnode *vp;
	int error = 0;

	for (;;) {
		if ((vp = ip->vp) == NULL) {
			error = getnewvnode(VT_HAMMER, ip->hmp->mp, vpp, 0, 0);
			if (error)
				break;
			hammer_lock_ex(&ip->lock);
			if (ip->vp != NULL) {
				hammer_unlock(&ip->lock);
				vp->v_type = VBAD;
				vx_put(vp);
				continue;
			}
			hammer_ref(&ip->lock);
			vp = *vpp;
			ip->vp = vp;
			vp->v_type = hammer_get_vnode_type(
					    ip->ino_rec.base.base.obj_type);

			switch(ip->ino_rec.base.base.obj_type) {
			case HAMMER_OBJTYPE_CDEV:
			case HAMMER_OBJTYPE_BDEV:
				vp->v_ops = &ip->hmp->mp->mnt_vn_spec_ops;
				addaliasu(vp, ip->ino_data.rmajor,
					  ip->ino_data.rminor);
				break;
			case HAMMER_OBJTYPE_FIFO:
				vp->v_ops = &ip->hmp->mp->mnt_vn_fifo_ops;
				break;
			default:
				break;
			}

			/*
			 * Only mark as the root vnode if the ip is not
			 * historical, otherwise the VFS cache will get
			 * confused.  The other half of the special handling
			 * is in hammer_vop_nlookupdotdot().
			 */
			if (ip->obj_id == HAMMER_OBJID_ROOT &&
			    ip->obj_asof == ip->hmp->asof) {
				vp->v_flag |= VROOT;
			}

			vp->v_data = (void *)ip;
			/* vnode locked by getnewvnode() */
			/* make related vnode dirty if inode dirty? */
			hammer_unlock(&ip->lock);
			if (vp->v_type == VREG)
				vinitvmio(vp, ip->ino_rec.ino_size);
			break;
		}

		/*
		 * loop if the vget fails (aka races), or if the vp
		 * no longer matches ip->vp.
		 */
		if (vget(vp, LK_EXCLUSIVE) == 0) {
			if (vp == ip->vp)
				break;
			vput(vp);
		}
	}
	*vpp = vp;
	return(error);
}

/*
 * Acquire a HAMMER inode.  The returned inode is not locked.  These functions
 * do not attach or detach the related vnode (use hammer_get_vnode() for
 * that).
 *
 * The flags argument is only applied for newly created inodes, and only
 * certain flags are inherited.
 *
 * Called from the frontend.
 */
struct hammer_inode *
hammer_get_inode(hammer_transaction_t trans, struct hammer_node **cache,
		 u_int64_t obj_id, hammer_tid_t asof, int flags, int *errorp)
{
	hammer_mount_t hmp = trans->hmp;
	struct hammer_inode_info iinfo;
	struct hammer_cursor cursor;
	struct hammer_inode *ip;

	/*
	 * Determine if we already have an inode cached.  If we do then
	 * we are golden.
	 */
	iinfo.obj_id = obj_id;
	iinfo.obj_asof = asof;
loop:
	ip = hammer_ino_rb_tree_RB_LOOKUP_INFO(&hmp->rb_inos_root, &iinfo);
	if (ip) {
		hammer_ref(&ip->lock);
		*errorp = 0;
		return(ip);
	}

	ip = kmalloc(sizeof(*ip), M_HAMMER, M_WAITOK|M_ZERO);
	++hammer_count_inodes;
	ip->obj_id = obj_id;
	ip->obj_asof = iinfo.obj_asof;
	ip->hmp = hmp;
	ip->flags = flags & HAMMER_INODE_RO;
	if (hmp->ronly)
		ip->flags |= HAMMER_INODE_RO;
	ip->trunc_off = 0x7FFFFFFFFFFFFFFFLL;
	RB_INIT(&ip->rec_tree);
	TAILQ_INIT(&ip->bio_list);
	TAILQ_INIT(&ip->bio_alt_list);
	TAILQ_INIT(&ip->target_list);

	/*
	 * Locate the on-disk inode.
	 */
retry:
	hammer_init_cursor(trans, &cursor, cache, NULL);
	cursor.key_beg.obj_id = ip->obj_id;
	cursor.key_beg.key = 0;
	cursor.key_beg.create_tid = 0;
	cursor.key_beg.delete_tid = 0;
	cursor.key_beg.rec_type = HAMMER_RECTYPE_INODE;
	cursor.key_beg.obj_type = 0;
	cursor.asof = iinfo.obj_asof;
	cursor.flags = HAMMER_CURSOR_GET_RECORD | HAMMER_CURSOR_GET_DATA |
		       HAMMER_CURSOR_ASOF;

	*errorp = hammer_btree_lookup(&cursor);
	if (*errorp == EDEADLK) {
		hammer_done_cursor(&cursor);
		goto retry;
	}

	/*
	 * On success the B-Tree lookup will hold the appropriate
	 * buffer cache buffers and provide a pointer to the requested
	 * information.  Copy the information to the in-memory inode
	 * and cache the B-Tree node to improve future operations.
	 */
	if (*errorp == 0) {
		ip->ino_rec = cursor.record->inode;
		ip->ino_data = cursor.data->inode;
		hammer_cache_node(cursor.node, &ip->cache[0]);
		if (cache)
			hammer_cache_node(cursor.node, cache);
	}

	/*
	 * On success load the inode's record and data and insert the
	 * inode into the B-Tree.  It is possible to race another lookup
	 * insertion of the same inode so deal with that condition too.
	 *
	 * The cursor's locked node interlocks against others creating and
	 * destroying ip while we were blocked.
	 */
	if (*errorp == 0) {
		hammer_ref(&ip->lock);
		if (RB_INSERT(hammer_ino_rb_tree, &hmp->rb_inos_root, ip)) {
			hammer_uncache_node(&ip->cache[0]);
			hammer_uncache_node(&ip->cache[1]);
			KKASSERT(ip->lock.refs == 1);
			--hammer_count_inodes;
			kfree(ip, M_HAMMER);
			hammer_done_cursor(&cursor);
			goto loop;
		}
		ip->flags |= HAMMER_INODE_ONDISK;
	} else {
		kprintf("hammer_get_inode: failed ip %p cursor %p error %d\n",
			ip, &cursor, *errorp);
		/*Debugger("x");*/
		--hammer_count_inodes;
		kfree(ip, M_HAMMER);
		ip = NULL;
	}
	hammer_done_cursor(&cursor);
	return (ip);
}

/*
 * Create a new filesystem object, returning the inode in *ipp.  The
 * returned inode will be referenced.
 *
 * The inode is created in-memory.
 */
int
hammer_create_inode(hammer_transaction_t trans, struct vattr *vap,
		    struct ucred *cred, hammer_inode_t dip,
		    struct hammer_inode **ipp)
{
	hammer_mount_t hmp;
	hammer_inode_t ip;
	uid_t xuid;

	hmp = trans->hmp;
	ip = kmalloc(sizeof(*ip), M_HAMMER, M_WAITOK|M_ZERO);
	++hammer_count_inodes;
	ip->obj_id = hammer_alloc_objid(trans, dip);
	KKASSERT(ip->obj_id != 0);
	ip->obj_asof = hmp->asof;
	ip->hmp = hmp;
	ip->flush_state = HAMMER_FST_IDLE;
	ip->flags = HAMMER_INODE_DDIRTY | HAMMER_INODE_RDIRTY |
		    HAMMER_INODE_ITIMES;

	ip->trunc_off = 0x7FFFFFFFFFFFFFFFLL;
	RB_INIT(&ip->rec_tree);
	TAILQ_INIT(&ip->bio_list);
	TAILQ_INIT(&ip->bio_alt_list);
	TAILQ_INIT(&ip->target_list);

	ip->ino_rec.ino_atime = trans->time;
	ip->ino_rec.ino_mtime = trans->time;
	ip->ino_rec.ino_size = 0;
	ip->ino_rec.ino_nlinks = 0;
	/* XXX */
	ip->ino_rec.base.base.btype = HAMMER_BTREE_TYPE_RECORD;
	ip->ino_rec.base.base.obj_id = ip->obj_id;
	ip->ino_rec.base.base.key = 0;
	ip->ino_rec.base.base.create_tid = 0;
	ip->ino_rec.base.base.delete_tid = 0;
	ip->ino_rec.base.base.rec_type = HAMMER_RECTYPE_INODE;
	ip->ino_rec.base.base.obj_type = hammer_get_obj_type(vap->va_type);

	ip->ino_data.version = HAMMER_INODE_DATA_VERSION;
	ip->ino_data.mode = vap->va_mode;
	ip->ino_data.ctime = trans->time;
	ip->ino_data.parent_obj_id = (dip) ? dip->ino_rec.base.base.obj_id : 0;

	switch(ip->ino_rec.base.base.obj_type) {
	case HAMMER_OBJTYPE_CDEV:
	case HAMMER_OBJTYPE_BDEV:
		ip->ino_data.rmajor = vap->va_rmajor;
		ip->ino_data.rminor = vap->va_rminor;
		break;
	default:
		break;
	}

	/*
	 * Calculate default uid/gid and overwrite with information from
	 * the vap.
	 */
	xuid = hammer_to_unix_xid(&dip->ino_data.uid);
	ip->ino_data.gid = dip->ino_data.gid;
	xuid = vop_helper_create_uid(hmp->mp, dip->ino_data.mode, xuid, cred,
				     &vap->va_mode);
	ip->ino_data.mode = vap->va_mode;

	if (vap->va_vaflags & VA_UID_UUID_VALID)
		ip->ino_data.uid = vap->va_uid_uuid;
	else if (vap->va_uid != (uid_t)VNOVAL)
		hammer_guid_to_uuid(&ip->ino_data.uid, xuid);
	if (vap->va_vaflags & VA_GID_UUID_VALID)
		ip->ino_data.gid = vap->va_gid_uuid;
	else if (vap->va_gid != (gid_t)VNOVAL)
		hammer_guid_to_uuid(&ip->ino_data.gid, vap->va_gid);

	hammer_ref(&ip->lock);
	if (RB_INSERT(hammer_ino_rb_tree, &hmp->rb_inos_root, ip)) {
		hammer_unref(&ip->lock);
		panic("hammer_create_inode: duplicate obj_id %llx", ip->obj_id);
	}
	*ipp = ip;
	return(0);
}

/*
 * Called by hammer_sync_inode().
 */
static int
hammer_update_inode(hammer_cursor_t cursor, hammer_inode_t ip)
{
	hammer_transaction_t trans = cursor->trans;
	hammer_record_t record;
	int error;

retry:
	error = 0;

	/*
	 * If the inode has a presence on-disk then locate it and mark
	 * it deleted, setting DELONDISK.
	 *
	 * The record may or may not be physically deleted, depending on
	 * the retention policy.
	 */
	if ((ip->flags & (HAMMER_INODE_ONDISK|HAMMER_INODE_DELONDISK)) ==
	    HAMMER_INODE_ONDISK) {
		hammer_normalize_cursor(cursor);
		cursor->key_beg.obj_id = ip->obj_id;
		cursor->key_beg.key = 0;
		cursor->key_beg.create_tid = 0;
		cursor->key_beg.delete_tid = 0;
		cursor->key_beg.rec_type = HAMMER_RECTYPE_INODE;
		cursor->key_beg.obj_type = 0;
		cursor->asof = ip->obj_asof;
		cursor->flags &= ~HAMMER_CURSOR_INITMASK;
		cursor->flags |= HAMMER_CURSOR_GET_RECORD | HAMMER_CURSOR_ASOF;
		cursor->flags |= HAMMER_CURSOR_BACKEND;

		error = hammer_btree_lookup(cursor);
		if (hammer_debug_inode)
			kprintf("IPDEL %p %08x %d", ip, ip->flags, error);
		if (error) {
			kprintf("error %d\n", error);
			Debugger("hammer_update_inode");
		}

		if (error == 0) {
			error = hammer_ip_delete_record(cursor, trans->tid);
			if (hammer_debug_inode)
				kprintf(" error %d\n", error);
			if (error && error != EDEADLK) {
				kprintf("error %d\n", error);
				Debugger("hammer_update_inode2");
			}
			if (error == 0) {
				ip->flags |= HAMMER_INODE_DELONDISK;
			}
			if (cursor->node)
				hammer_cache_node(cursor->node, &ip->cache[0]);
		}
		if (error == EDEADLK) {
			hammer_done_cursor(cursor);
			error = hammer_init_cursor(trans, cursor,
						   &ip->cache[0], ip);
			if (hammer_debug_inode)
				kprintf("IPDED %p %d\n", ip, error);
			if (error == 0)
				goto retry;
		}
	}

	/*
	 * Ok, write out the initial record or a new record (after deleting
	 * the old one), unless the DELETED flag is set.  This routine will
	 * clear DELONDISK if it writes out a record.
	 *
	 * Update our inode statistics if this is the first application of
	 * the inode on-disk.
	 */
	if (error == 0 && (ip->flags & HAMMER_INODE_DELETED) == 0) {
		/*
		 * Generate a record and write it to the media
		 */
		record = hammer_alloc_mem_record(ip);
		record->type = HAMMER_MEM_RECORD_GENERAL;
		record->flush_state = HAMMER_FST_FLUSH;
		record->rec.inode = ip->sync_ino_rec;
		record->rec.inode.base.base.create_tid = trans->tid;
		record->rec.inode.base.data_len = sizeof(ip->sync_ino_data);
		record->data = (void *)&ip->sync_ino_data;
		record->flags |= HAMMER_RECF_INTERLOCK_BE;
		for (;;) {
			error = hammer_ip_sync_record_cursor(cursor, record);
			if (hammer_debug_inode)
				kprintf("GENREC %p rec %08x %d\n",	
					ip, record->flags, error);
			if (error != EDEADLK)
				break;
			hammer_done_cursor(cursor);
			error = hammer_init_cursor(trans, cursor,
						   &ip->cache[0], ip);
			if (hammer_debug_inode)
				kprintf("GENREC reinit %d\n", error);
			if (error)
				break;
		}
		if (error) {
			kprintf("error %d\n", error);
			Debugger("hammer_update_inode3");
		}

		/*
		 * The record isn't managed by the inode's record tree,
		 * destroy it whether we succeed or fail.
		 */
		record->flags &= ~HAMMER_RECF_INTERLOCK_BE;
		record->flags |= HAMMER_RECF_DELETED_FE;
		record->flush_state = HAMMER_FST_IDLE;
		hammer_rel_mem_record(record);

		/*
		 * Finish up.
		 */
		if (error == 0) {
			if (hammer_debug_inode)
				kprintf("CLEANDELOND %p %08x\n", ip, ip->flags);
			ip->sync_flags &= ~(HAMMER_INODE_RDIRTY |
					    HAMMER_INODE_DDIRTY |
					    HAMMER_INODE_ITIMES);
			ip->flags &= ~HAMMER_INODE_DELONDISK;

			/*
			 * Root volume count of inodes
			 */
			if ((ip->flags & HAMMER_INODE_ONDISK) == 0) {
				hammer_modify_volume_field(trans,
							   trans->rootvol,
							   vol0_stat_inodes);
				++ip->hmp->rootvol->ondisk->vol0_stat_inodes;
				hammer_modify_volume_done(trans->rootvol);
				ip->flags |= HAMMER_INODE_ONDISK;
				if (hammer_debug_inode)
					kprintf("NOWONDISK %p\n", ip);
			}
		}
	}

	/*
	 * If the inode has been destroyed, clean out any left-over flags
	 * that may have been set by the frontend.
	 */
	if (error == 0 && (ip->flags & HAMMER_INODE_DELETED)) { 
		ip->sync_flags &= ~(HAMMER_INODE_RDIRTY |
				    HAMMER_INODE_DDIRTY |
				    HAMMER_INODE_ITIMES);
	}
	return(error);
}

/*
 * Update only the itimes fields.  This is done no-historically.  The
 * record is updated in-place on the disk.
 */
static int
hammer_update_itimes(hammer_cursor_t cursor, hammer_inode_t ip)
{
	hammer_transaction_t trans = cursor->trans;
	struct hammer_inode_record *rec;
	int error;

retry:
	error = 0;
	if ((ip->flags & (HAMMER_INODE_ONDISK|HAMMER_INODE_DELONDISK)) ==
	    HAMMER_INODE_ONDISK) {
		hammer_normalize_cursor(cursor);
		cursor->key_beg.obj_id = ip->obj_id;
		cursor->key_beg.key = 0;
		cursor->key_beg.create_tid = 0;
		cursor->key_beg.delete_tid = 0;
		cursor->key_beg.rec_type = HAMMER_RECTYPE_INODE;
		cursor->key_beg.obj_type = 0;
		cursor->asof = ip->obj_asof;
		cursor->flags &= ~HAMMER_CURSOR_INITMASK;
		cursor->flags |= HAMMER_CURSOR_GET_RECORD | HAMMER_CURSOR_ASOF;
		cursor->flags |= HAMMER_CURSOR_BACKEND;

		error = hammer_btree_lookup(cursor);
		if (error) {
			kprintf("error %d\n", error);
			Debugger("hammer_update_itimes1");
		}
		if (error == 0) {
			/*
			 * Do not generate UNDO records for atime/mtime
			 * updates.
			 */
			rec = &cursor->record->inode;
			hammer_modify_buffer(trans, cursor->record_buffer,
					     NULL, 0);
			rec->ino_atime = ip->sync_ino_rec.ino_atime;
			rec->ino_mtime = ip->sync_ino_rec.ino_mtime;
			hammer_modify_buffer_done(cursor->record_buffer);
			ip->sync_flags &= ~HAMMER_INODE_ITIMES;
			/* XXX recalculate crc */
			hammer_cache_node(cursor->node, &ip->cache[0]);
		}
		if (error == EDEADLK) {
			hammer_done_cursor(cursor);
			error = hammer_init_cursor(trans, cursor,
						   &ip->cache[0], ip);
			if (error == 0)
				goto retry;
		}
	}
	return(error);
}

/*
 * Release a reference on an inode, flush as requested.
 *
 * On the last reference we queue the inode to the flusher for its final
 * disposition.
 */
void
hammer_rel_inode(struct hammer_inode *ip, int flush)
{
	hammer_mount_t hmp = ip->hmp;

	/*
	 * Handle disposition when dropping the last ref.
	 */
	for (;;) {
		if (ip->lock.refs == 1) {
			/*
			 * Determine whether on-disk action is needed for
			 * the inode's final disposition.
			 */
			KKASSERT(ip->vp == NULL);
			hammer_inode_unloadable_check(ip, 0);
			if (ip->flags & HAMMER_INODE_MODMASK) {
				hammer_flush_inode(ip, 0);
			} else if (ip->lock.refs == 1) {
				hammer_unload_inode(ip);
				break;
			}
		} else {
			if (flush)
				hammer_flush_inode(ip, 0);

			/*
			 * The inode still has multiple refs, try to drop
			 * one ref.
			 */
			KKASSERT(ip->lock.refs >= 1);
			if (ip->lock.refs > 1) {
				hammer_unref(&ip->lock);
				break;
			}
		}
	}

	/*
	 * XXX bad hack until I add code to track inodes in SETUP.  We
	 * can queue a lot of inodes to the syncer but if we don't wake
	 * it up the undo sets will be too large or too many unflushed
	 * records will build up and blow our malloc limit.
	 */
	if (++hmp->reclaim_count > 256) {
		hmp->reclaim_count = 0;
		hammer_flusher_async(hmp);
	}
}

/*
 * Unload and destroy the specified inode.  Must be called with one remaining
 * reference.  The reference is disposed of.
 *
 * This can only be called in the context of the flusher.
 */
static int
hammer_unload_inode(struct hammer_inode *ip)
{
	KASSERT(ip->lock.refs == 1,
		("hammer_unload_inode: %d refs\n", ip->lock.refs));
	KKASSERT(ip->vp == NULL);
	KKASSERT(ip->flush_state == HAMMER_FST_IDLE);
	KKASSERT(ip->cursor_ip_refs == 0);
	KKASSERT((ip->flags & HAMMER_INODE_MODMASK) == 0);

	KKASSERT(RB_EMPTY(&ip->rec_tree));
	KKASSERT(TAILQ_EMPTY(&ip->target_list));
	KKASSERT(TAILQ_EMPTY(&ip->bio_list));
	KKASSERT(TAILQ_EMPTY(&ip->bio_alt_list));

	RB_REMOVE(hammer_ino_rb_tree, &ip->hmp->rb_inos_root, ip);

	hammer_uncache_node(&ip->cache[0]);
	hammer_uncache_node(&ip->cache[1]);
	if (ip->objid_cache)
		hammer_clear_objid(ip);
	--hammer_count_inodes;
	kfree(ip, M_HAMMER);

	return(0);
}

/*
 * A transaction has modified an inode, requiring updates as specified by
 * the passed flags.
 *
 * HAMMER_INODE_RDIRTY:	Inode record has been updated
 * HAMMER_INODE_DDIRTY: Inode data has been updated
 * HAMMER_INODE_XDIRTY: Dirty in-memory records
 * HAMMER_INODE_BUFS:   Dirty buffer cache buffers
 * HAMMER_INODE_DELETED: Inode record/data must be deleted
 * HAMMER_INODE_ITIMES: mtime/atime has been updated
 */
void
hammer_modify_inode(hammer_transaction_t trans, hammer_inode_t ip, int flags)
{
	KKASSERT ((ip->flags & HAMMER_INODE_RO) == 0 ||
		  (flags & (HAMMER_INODE_RDIRTY|HAMMER_INODE_DDIRTY|
		   HAMMER_INODE_XDIRTY|HAMMER_INODE_BUFS|
		   HAMMER_INODE_DELETED|HAMMER_INODE_ITIMES)) == 0);

	ip->flags |= flags;
}

/*
 * Request that an inode be flushed.  This whole mess cannot block and may
 * recurse.  Once requested HAMMER will attempt to actively flush it until
 * the flush can be done.
 *
 * The inode may already be flushing, or may be in a setup state.  We can
 * place the inode in a flushing state if it is currently idle and flag it
 * to reflush if it is currently flushing.
 */
void
hammer_flush_inode(hammer_inode_t ip, int flags)
{
	hammer_record_t depend;
	int r, good;

	/*
	 * Trivial 'nothing to flush' case.  If the inode is ina SETUP
	 * state we have to put it back into an IDLE state so we can
	 * drop the extra ref.
	 */
	if ((ip->flags & HAMMER_INODE_MODMASK) == 0) {
		if (ip->flush_state == HAMMER_FST_SETUP) {
			ip->flush_state = HAMMER_FST_IDLE;
			hammer_rel_inode(ip, 0);
		}
		return;
	}

	/*
	 * Our flush action will depend on the current state.
	 */
	switch(ip->flush_state) {
	case HAMMER_FST_IDLE:
		/*
		 * We have no dependancies and can flush immediately.  Some
		 * our children may not be flushable so we have to re-test
		 * with that additional knowledge.
		 */
		hammer_flush_inode_core(ip, flags);
		break;
	case HAMMER_FST_SETUP:
		/*
		 * Recurse upwards through dependancies via target_list
		 * and start their flusher actions going if possible.
		 *
		 * 'good' is our connectivity.  -1 means we have none and
		 * can't flush, 0 means there weren't any dependancies, and
		 * 1 means we have good connectivity.
		 */
		good = 0;
		TAILQ_FOREACH(depend, &ip->target_list, target_entry) {
			r = hammer_setup_parent_inodes(depend);
			if (r < 0 && good == 0)
				good = -1;
			if (r > 0)
				good = 1;
		}

		/*
		 * We can continue if good >= 0.  Determine how many records
		 * under our inode can be flushed (and mark them).
		 */
		if (good >= 0) {
			hammer_flush_inode_core(ip, flags);
		} else {
			ip->flags |= HAMMER_INODE_REFLUSH;
			if (flags & HAMMER_FLUSH_SIGNAL) {
				ip->flags |= HAMMER_INODE_RESIGNAL;
				hammer_flusher_async(ip->hmp);
			}
		}
		break;
	default:
		/*
		 * We are already flushing, flag the inode to reflush
		 * if needed after it completes its current flush.
		 */
		if ((ip->flags & HAMMER_INODE_REFLUSH) == 0)
			ip->flags |= HAMMER_INODE_REFLUSH;
		if (flags & HAMMER_FLUSH_SIGNAL) {
			ip->flags |= HAMMER_INODE_RESIGNAL;
			hammer_flusher_async(ip->hmp);
		}
		break;
	}
}

/*
 * We are asked to recurse upwards and convert the record from SETUP
 * to FLUSH if possible.  record->ip is a parent of the caller's inode,
 * and record->target_ip is the caller's inode.
 *
 * Return 1 if the record gives us connectivity
 *
 * Return 0 if the record is not relevant 
 *
 * Return -1 if we can't resolve the dependancy and there is no connectivity.
 */
static int
hammer_setup_parent_inodes(hammer_record_t record)
{
	hammer_mount_t hmp = record->ip->hmp;
	hammer_record_t depend;
	hammer_inode_t ip;
	int r, good;

	KKASSERT(record->flush_state != HAMMER_FST_IDLE);
	ip = record->ip;

	/*
	 * If the record is already flushing, is it in our flush group?
	 *
	 * If it is in our flush group but it is a general record or a 
	 * delete-on-disk, it does not improve our connectivity (return 0),
	 * and if the target inode is not trying to destroy itself we can't
	 * allow the operation yet anyway (the second return -1).
	 */
	if (record->flush_state == HAMMER_FST_FLUSH) {
		if (record->flush_group != hmp->flusher_next) {
			ip->flags |= HAMMER_INODE_REFLUSH;
			return(-1);
		}
		if (record->type == HAMMER_MEM_RECORD_ADD)
			return(1);
		/* GENERAL or DEL */
		return(0);
	}

	/*
	 * It must be a setup record.  Try to resolve the setup dependancies
	 * by recursing upwards so we can place ip on the flush list.
	 */
	KKASSERT(record->flush_state == HAMMER_FST_SETUP);

	good = 0;
	TAILQ_FOREACH(depend, &ip->target_list, target_entry) {
		r = hammer_setup_parent_inodes(depend);
		if (r < 0 && good == 0)
			good = -1;
		if (r > 0)
			good = 1;
	}

	/*
	 * We can't flush ip because it has no connectivity (XXX also check
	 * nlinks for pre-existing connectivity!).  Flag it so any resolution
	 * recurses back down.
	 */
	if (good < 0) {
		ip->flags |= HAMMER_INODE_REFLUSH;
		return(good);
	}

	/*
	 * We are go, place the parent inode in a flushing state so we can
	 * place its record in a flushing state.  Note that the parent
	 * may already be flushing.  The record must be in the same flush
	 * group as the parent.
	 */
	if (ip->flush_state != HAMMER_FST_FLUSH)
		hammer_flush_inode_core(ip, HAMMER_FLUSH_RECURSION);
	KKASSERT(ip->flush_state == HAMMER_FST_FLUSH);
	KKASSERT(record->flush_state == HAMMER_FST_SETUP);

#if 0
	if (record->type == HAMMER_MEM_RECORD_DEL &&
	    (record->target_ip->flags & (HAMMER_INODE_DELETED|HAMMER_INODE_DELONDISK)) == 0) {
		/*
		 * Regardless of flushing state we cannot sync this path if the
		 * record represents a delete-on-disk but the target inode
		 * is not ready to sync its own deletion.
		 *
		 * XXX need to count effective nlinks to determine whether
		 * the flush is ok, otherwise removing a hardlink will
		 * just leave the DEL record to rot.
		 */
		record->target_ip->flags |= HAMMER_INODE_REFLUSH;
		return(-1);
	} else
#endif
	if (ip->flush_group == ip->hmp->flusher_next) {
		/*
		 * This is the record we wanted to synchronize.
		 */
		record->flush_state = HAMMER_FST_FLUSH;
		record->flush_group = ip->flush_group;
		hammer_ref(&record->lock);
		if (record->type == HAMMER_MEM_RECORD_ADD)
			return(1);

		/*
		 * A general or delete-on-disk record does not contribute
		 * to our visibility.  We can still flush it, however.
		 */
		return(0);
	} else {
		/*
		 * We couldn't resolve the dependancies, request that the
		 * inode be flushed when the dependancies can be resolved.
		 */
		ip->flags |= HAMMER_INODE_REFLUSH;
		return(-1);
	}
}

/*
 * This is the core routine placing an inode into the FST_FLUSH state.
 */
static void
hammer_flush_inode_core(hammer_inode_t ip, int flags)
{
	int go_count;

	/*
	 * Set flush state and prevent the flusher from cycling into
	 * the next flush group.  Do not place the ip on the list yet.
	 * Inodes not in the idle state get an extra reference.
	 */
	KKASSERT(ip->flush_state != HAMMER_FST_FLUSH);
	if (ip->flush_state == HAMMER_FST_IDLE)
		hammer_ref(&ip->lock);
	ip->flush_state = HAMMER_FST_FLUSH;
	ip->flush_group = ip->hmp->flusher_next;
	++ip->hmp->flusher_lock;

	/*
	 * We need to be able to vfsync/truncate from the backend.
	 */
	KKASSERT((ip->flags & HAMMER_INODE_VHELD) == 0);
	if (ip->vp && (ip->vp->v_flag & VINACTIVE) == 0) {
		ip->flags |= HAMMER_INODE_VHELD;
		vref(ip->vp);
	}

	/*
	 * Figure out how many in-memory records we can actually flush
	 * (not including inode meta-data, buffers, etc).
	 */
	if (flags & HAMMER_FLUSH_RECURSION) {
		go_count = 1;
	} else {
		go_count = RB_SCAN(hammer_rec_rb_tree, &ip->rec_tree, NULL,
				   hammer_setup_child_callback, NULL);
	}

	/*
	 * This is a more involved test that includes go_count.  If we
	 * can't flush, flag the inode and return.  If go_count is 0 we
	 * were are unable to flush any records in our rec_tree and
	 * must ignore the XDIRTY flag.
	 */
	if (go_count == 0) {
		if ((ip->flags & HAMMER_INODE_MODMASK_NOXDIRTY) == 0) {
			ip->flags |= HAMMER_INODE_REFLUSH;
			ip->flush_state = HAMMER_FST_SETUP;
			if (ip->flags & HAMMER_INODE_VHELD) {
				ip->flags &= ~HAMMER_INODE_VHELD;
				vrele(ip->vp);
			}
			if (flags & HAMMER_FLUSH_SIGNAL) {
				ip->flags |= HAMMER_INODE_RESIGNAL;
				hammer_flusher_async(ip->hmp);
			}
			if (--ip->hmp->flusher_lock == 0)
				wakeup(&ip->hmp->flusher_lock);
			return;
		}
	}

	/*
	 * Snapshot the state of the inode for the backend flusher.
	 *
	 * The truncation must be retained in the frontend until after
	 * we've actually performed the record deletion.
	 *
	 * NOTE: The DELETING flag is a mod flag, but it is also sticky,
	 * and stays in ip->flags.  Once set, it stays set until the
	 * inode is destroyed.
	 */
	ip->sync_flags = (ip->flags & HAMMER_INODE_MODMASK);
	ip->sync_trunc_off = ip->trunc_off;
	ip->sync_ino_rec = ip->ino_rec;
	ip->sync_ino_data = ip->ino_data;
	ip->flags &= ~HAMMER_INODE_MODMASK | HAMMER_INODE_TRUNCATED;

	/*
	 * The flusher list inherits our inode and reference.
	 */
	TAILQ_INSERT_TAIL(&ip->hmp->flush_list, ip, flush_entry);
	if (--ip->hmp->flusher_lock == 0)
		wakeup(&ip->hmp->flusher_lock);

	if (flags & HAMMER_FLUSH_SIGNAL)
		hammer_flusher_async(ip->hmp);
}

/*
 * Callback for scan of ip->rec_tree.  Try to include each record in our
 * flush.  ip->flush_group has been set but the inode has not yet been
 * moved into a flushing state.
 *
 * If we get stuck on a record we have to set HAMMER_INODE_REFLUSH on
 * both inodes.
 *
 * We return 1 for any record placed or found in FST_FLUSH, which prevents
 * the caller from shortcutting the flush.
 */
static int
hammer_setup_child_callback(hammer_record_t rec, void *data)
{
	hammer_inode_t target_ip;
	hammer_inode_t ip;
	int r;

	/*
	 * If the record has been deleted by the backend (it's being held
	 * by the frontend in a race), just ignore it.
	 */
	if (rec->flags & HAMMER_RECF_DELETED_BE)
		return(0);

	/*
	 * If the record is in an idle state it has no dependancies and
	 * can be flushed.
	 */
	ip = rec->ip;
	r = 0;

	switch(rec->flush_state) {
	case HAMMER_FST_IDLE:
		/*
		 * Record has no setup dependancy, we can flush it.
		 */
		KKASSERT(rec->target_ip == NULL);
		rec->flush_state = HAMMER_FST_FLUSH;
		rec->flush_group = ip->flush_group;
		hammer_ref(&rec->lock);
		r = 1;
		break;
	case HAMMER_FST_SETUP:
		/*
		 * Record has a setup dependancy.  Try to include the
		 * target ip in the flush. 
		 *
		 * We have to be careful here, if we do not do the right
		 * thing we can lose track of dirty inodes and the system
		 * will lockup trying to allocate buffers.
		 */
		target_ip = rec->target_ip;
		KKASSERT(target_ip != NULL);
		KKASSERT(target_ip->flush_state != HAMMER_FST_IDLE);
		if (target_ip->flush_state == HAMMER_FST_FLUSH) {
			/*
			 * If the target IP is already flushing in our group
			 * we are golden, otherwise make sure the target
			 * reflushes.
			 */
			if (target_ip->flush_group == ip->flush_group) {
				rec->flush_state = HAMMER_FST_FLUSH;
				rec->flush_group = ip->flush_group;
				hammer_ref(&rec->lock);
				r = 1;
			} else {
				target_ip->flags |= HAMMER_INODE_REFLUSH;
			}
		} else if (rec->type == HAMMER_MEM_RECORD_ADD) {
			/*
			 * If the target IP is not flushing we can force
			 * it to flush, even if it is unable to write out
			 * any of its own records we have at least one in
			 * hand that we CAN deal with.
			 */
			rec->flush_state = HAMMER_FST_FLUSH;
			rec->flush_group = ip->flush_group;
			hammer_ref(&rec->lock);
			hammer_flush_inode_core(target_ip,
						HAMMER_FLUSH_RECURSION);
			r = 1;
		} else {
			/*
			 * General or delete-on-disk record.
			 *
			 * XXX this needs help.  If a delete-on-disk we could
			 * disconnect the target.  If the target has its own
			 * dependancies they really need to be flushed.
			 *
			 * XXX
			 */
			rec->flush_state = HAMMER_FST_FLUSH;
			rec->flush_group = ip->flush_group;
			hammer_ref(&rec->lock);
			hammer_flush_inode_core(target_ip,
						HAMMER_FLUSH_RECURSION);
			r = 1;
		}
		break;
	case HAMMER_FST_FLUSH:
		/* 
		 * Record already associated with a flush group.  It had
		 * better be ours.
		 */
		KKASSERT(rec->flush_group == ip->flush_group);
		r = 1;
		break;
	}
	return(r);
}

/*
 * Wait for a previously queued flush to complete
 */
void
hammer_wait_inode(hammer_inode_t ip)
{
	while (ip->flush_state != HAMMER_FST_IDLE) {
		ip->flags |= HAMMER_INODE_FLUSHW;
		tsleep(&ip->flags, 0, "hmrwin", 0);
	}
}

/*
 * Called by the backend code when a flush has been completed.
 * The inode has already been removed from the flush list.
 *
 * A pipelined flush can occur, in which case we must re-enter the
 * inode on the list and re-copy its fields.
 */
void
hammer_flush_inode_done(hammer_inode_t ip)
{
	struct bio *bio;
	int dorel = 0;

	KKASSERT(ip->flush_state == HAMMER_FST_FLUSH);

	/*
	 * Allow BIOs to queue to the inode's primary bioq again.
	 */
	ip->flags &= ~HAMMER_INODE_WRITE_ALT;

	/*
	 * Merge left-over flags back into the frontend and fix the state.
	 */
	ip->flags |= ip->sync_flags;

	/*
	 * The backend may have adjusted nlinks, so if the adjusted nlinks
	 * does not match the fronttend set the frontend's RDIRTY flag again.
	 */
	if (ip->ino_rec.ino_nlinks != ip->sync_ino_rec.ino_nlinks)
		ip->flags |= HAMMER_INODE_RDIRTY;

	/*
	 * Reflush any BIOs that wound up in the alt list.  Our inode will
	 * also wind up at the end of the flusher's list.
	 */
	while ((bio = TAILQ_FIRST(&ip->bio_alt_list)) != NULL) {
		TAILQ_REMOVE(&ip->bio_alt_list, bio, bio_act);
		TAILQ_INSERT_TAIL(&ip->bio_list, bio, bio_act);
	}
	/*
	 * Fix up the dirty buffer status.
	 */
	if (TAILQ_FIRST(&ip->bio_list) ||
	    (ip->vp && RB_ROOT(&ip->vp->v_rbdirty_tree))) {
		ip->flags |= HAMMER_INODE_BUFS;
	}

	/*
	 * Re-set the XDIRTY flag if some of the inode's in-memory records
	 * could not be flushed.
	 */
	if (RB_ROOT(&ip->rec_tree))
		ip->flags |= HAMMER_INODE_XDIRTY;

	/*
	 * Do not lose track of inodes which no longer have vnode
	 * assocations, otherwise they may never get flushed again.
	 */
	if ((ip->flags & HAMMER_INODE_MODMASK) && ip->vp == NULL)
		ip->flags |= HAMMER_INODE_REFLUSH;

	/*
	 * Adjust flush_state.  The target state (idle or setup) shouldn't
	 * be terribly important since we will reflush if we really need
	 * to do anything. XXX
	 */
	if (TAILQ_EMPTY(&ip->target_list) && RB_EMPTY(&ip->rec_tree)) {
		ip->flush_state = HAMMER_FST_IDLE;
		dorel = 1;
	} else {
		ip->flush_state = HAMMER_FST_SETUP;
	}

	/*
	 * Clean up the vnode ref
	 */
	if (ip->flags & HAMMER_INODE_VHELD) {
		ip->flags &= ~HAMMER_INODE_VHELD;
		vrele(ip->vp);
	}

	/*
	 * If the frontend made more changes and requested another flush,
	 * then try to get it running.
	 */
	if (ip->flags & HAMMER_INODE_REFLUSH) {
		ip->flags &= ~HAMMER_INODE_REFLUSH;
		if (ip->flags & HAMMER_INODE_RESIGNAL) {
			ip->flags &= ~HAMMER_INODE_RESIGNAL;
			hammer_flush_inode(ip, HAMMER_FLUSH_SIGNAL);
		} else {
			hammer_flush_inode(ip, 0);
		}
	}

	/*
	 * Finally, if the frontend is waiting for a flush to complete,
	 * wake it up.
	 */
	if (ip->flush_state != HAMMER_FST_FLUSH) {
		if (ip->flags & HAMMER_INODE_FLUSHW) {
			ip->flags &= ~HAMMER_INODE_FLUSHW;
			wakeup(&ip->flags);
		}
	}
	if (dorel)
		hammer_rel_inode(ip, 0);
}

/*
 * Called from hammer_sync_inode() to synchronize in-memory records
 * to the media.
 */
static int
hammer_sync_record_callback(hammer_record_t record, void *data)
{
	hammer_cursor_t cursor = data;
	hammer_transaction_t trans = cursor->trans;
	int error;

	/*
	 * Skip records that do not belong to the current flush.
	 */
	if (record->flush_state != HAMMER_FST_FLUSH)
		return(0);
	KKASSERT((record->flags & HAMMER_RECF_DELETED_BE) == 0);
#if 1
	if (record->flush_group != record->ip->flush_group) {
		kprintf("sync_record %p ip %p bad flush group %d %d\n", record, record->ip, record->flush_group ,record->ip->flush_group);
		Debugger("blah2");
		return(0);
	}
#endif
	KKASSERT(record->flush_group == record->ip->flush_group);

	/*
	 * Interlock the record using the BE flag.  Once BE is set the
	 * frontend cannot change the state of FE.
	 *
	 * NOTE: If FE is set prior to us setting BE we still sync the
	 * record out, but the flush completion code converts it to 
	 * a delete-on-disk record instead of destroying it.
	 */
	KKASSERT((record->flags & HAMMER_RECF_INTERLOCK_BE) == 0);
	record->flags |= HAMMER_RECF_INTERLOCK_BE;

	/*
	 * If DELETED_FE is set we may have already sent dependant pieces
	 * to the disk and we must flush the record as if it hadn't been
	 * deleted.  This creates a bit of a mess because we have to
	 * have ip_sync_record convert the record to MEM_RECORD_DEL before
	 * it inserts the B-Tree record.  Otherwise the media sync might
	 * be visible to the frontend.
	 */
	if (record->flags & HAMMER_RECF_DELETED_FE) {
		if (record->type == HAMMER_MEM_RECORD_ADD) {
			record->flags |= HAMMER_RECF_CONVERT_DELETE;
		} else {
			KKASSERT(record->type != HAMMER_MEM_RECORD_DEL);
			return(0);
		}
	}

	/*
	 * Assign the create_tid for new records.  Deletions already
	 * have the record's entire key properly set up.
	 */
	if (record->type != HAMMER_MEM_RECORD_DEL)
		record->rec.inode.base.base.create_tid = trans->tid;
	for (;;) {
		error = hammer_ip_sync_record_cursor(cursor, record);
		if (error != EDEADLK)
			break;
		hammer_done_cursor(cursor);
		error = hammer_init_cursor(trans, cursor, &record->ip->cache[0],
					   record->ip);
		if (error)
			break;
	}
	record->flags &= ~HAMMER_RECF_CONVERT_DELETE;

	if (error) {
		error = -error;
		if (error != -ENOSPC) {
			kprintf("hammer_sync_record_callback: sync failed rec "
				"%p, error %d\n", record, error);
			Debugger("sync failed rec");
		}
	}
	hammer_flush_record_done(record, error);
	return(error);
}

/*
 * XXX error handling
 */
int
hammer_sync_inode(hammer_inode_t ip)
{
	struct hammer_transaction trans;
	struct hammer_cursor cursor;
	struct bio *bio;
	hammer_record_t depend;
	hammer_record_t next;
	int error, tmp_error;
	u_int64_t nlinks;

	if ((ip->sync_flags & HAMMER_INODE_MODMASK) == 0)
		return(0);

	hammer_start_transaction_fls(&trans, ip->hmp);
	error = hammer_init_cursor(&trans, &cursor, &ip->cache[0], ip);
	if (error)
		goto done;

	/*
	 * Any directory records referencing this inode which are not in
	 * our current flush group must adjust our nlink count for the
	 * purposes of synchronization to disk.
	 *
	 * Records which are in our flush group can be unlinked from our
	 * inode now, allowing the inode to be physically deleted.
	 */
	nlinks = ip->ino_rec.ino_nlinks;
	next = TAILQ_FIRST(&ip->target_list);
	while ((depend = next) != NULL) {
		next = TAILQ_NEXT(depend, target_entry);
		if (depend->flush_state == HAMMER_FST_FLUSH &&
		    depend->flush_group == ip->hmp->flusher_act) {
			TAILQ_REMOVE(&ip->target_list, depend, target_entry);
			depend->target_ip = NULL;
			/* no need to signal target_ip, it is us */
		} else if ((depend->flags & HAMMER_RECF_DELETED_FE) == 0) {
			switch(depend->type) {
			case HAMMER_MEM_RECORD_ADD:
				--nlinks;
				break;
			case HAMMER_MEM_RECORD_DEL:
				++nlinks;
				break;
			default:
				break;
			}
		}
	}

	/*
	 * Set dirty if we had to modify the link count.
	 */
	if (ip->sync_ino_rec.ino_nlinks != nlinks) {
		KKASSERT((int64_t)nlinks >= 0);
		ip->sync_ino_rec.ino_nlinks = nlinks;
		ip->sync_flags |= HAMMER_INODE_RDIRTY;
	}

	/*
	 * Queue up as many dirty buffers as we can then set a flag to
	 * cause any further BIOs to go to the alternative queue.
	 */
	if (ip->flags & HAMMER_INODE_VHELD)
		error = vfsync(ip->vp, MNT_NOWAIT, 1, NULL, NULL);
	ip->flags |= HAMMER_INODE_WRITE_ALT;

	/*
	 * The buffer cache may contain dirty buffers beyond the inode
	 * state we copied from the frontend to the backend.  Because
	 * we are syncing our buffer cache on the backend, resync
	 * the truncation point and the file size so we don't wipe out
	 * any data.
	 *
	 * Syncing the buffer cache on the frontend has serious problems
	 * because it prevents us from passively queueing dirty inodes
	 * to the backend (the BIO's could stall indefinitely).
	 */
	if (ip->flags & HAMMER_INODE_TRUNCATED) {
		ip->sync_trunc_off = ip->trunc_off;
		ip->sync_flags |= HAMMER_INODE_TRUNCATED;
	}
	if (ip->sync_ino_rec.ino_size != ip->ino_rec.ino_size) {
		ip->sync_ino_rec.ino_size = ip->ino_rec.ino_size;
		ip->sync_flags |= HAMMER_INODE_RDIRTY;
	}

	/*
	 * If there is a trunction queued destroy any data past the (aligned)
	 * truncation point.  Userland will have dealt with the buffer
	 * containing the truncation point for us.
	 *
	 * We don't flush pending frontend data buffers until after we've
	 * dealth with the truncation.
	 *
	 * Don't bother if the inode is or has been deleted.
	 */
	if (ip->sync_flags & HAMMER_INODE_TRUNCATED) {
		/*
		 * Interlock trunc_off.  The VOP front-end may continue to
		 * make adjustments to it while we are blocked.
		 */
		off_t trunc_off;
		off_t aligned_trunc_off;

		trunc_off = ip->sync_trunc_off;
		aligned_trunc_off = (trunc_off + HAMMER_BUFMASK) &
				    ~HAMMER_BUFMASK64;

		/*
		 * Delete any whole blocks on-media.  The front-end has
		 * already cleaned out any partial block and made it
		 * pending.  The front-end may have updated trunc_off
		 * while we were blocked so do not just unconditionally
		 * set it to the maximum offset.
		 */
		error = hammer_ip_delete_range(&cursor, ip,
						aligned_trunc_off,
						0x7FFFFFFFFFFFFFFFLL);
		if (error)
			Debugger("hammer_ip_delete_range errored");
		ip->sync_flags &= ~HAMMER_INODE_TRUNCATED;
		if (ip->trunc_off >= trunc_off) {
			ip->trunc_off = 0x7FFFFFFFFFFFFFFFLL;
			ip->flags &= ~HAMMER_INODE_TRUNCATED;
		}
	} else {
		error = 0;
	}

	/*
	 * Now sync related records.  These will typically be directory
	 * entries or delete-on-disk records.
	 *
	 * Not all records will be flushed, but clear XDIRTY anyway.  We
	 * will set it again in the frontend hammer_flush_inode_done() 
	 * if records remain.
	 */
	if (error == 0) {
		tmp_error = RB_SCAN(hammer_rec_rb_tree, &ip->rec_tree, NULL,
				    hammer_sync_record_callback, &cursor);
		if (tmp_error < 0)
			tmp_error = -error;
		if (tmp_error)
			error = tmp_error;
		if (error == 0)
			ip->sync_flags &= ~HAMMER_INODE_XDIRTY;
	}

	/*
	 * If we are deleting the inode the frontend had better not have
	 * any active references on elements making up the inode.
	 */
	if (error == 0 && ip->sync_ino_rec.ino_nlinks == 0 &&
		RB_EMPTY(&ip->rec_tree)  &&
	    (ip->sync_flags & HAMMER_INODE_DELETING) &&
	    (ip->flags & HAMMER_INODE_DELETED) == 0) {
		int count1 = 0;

		kprintf("Y");
		ip->flags |= HAMMER_INODE_DELETED;
		error = hammer_ip_delete_range_all(&cursor, ip, &count1);
		if (error == 0) {
			ip->sync_flags &= ~HAMMER_INODE_DELETING;
			ip->sync_flags &= ~HAMMER_INODE_TRUNCATED;
			KKASSERT(RB_EMPTY(&ip->rec_tree));

			/*
			 * Set delete_tid in both the frontend and backend
			 * copy of the inode record.  The DELETED flag handles
			 * this, do not set RDIRTY.
			 */
			ip->ino_rec.base.base.delete_tid = trans.tid;
			ip->sync_ino_rec.base.base.delete_tid = trans.tid;

			/*
			 * Adjust the inode count in the volume header
			 */
			hammer_modify_volume_field(&trans, trans.rootvol,
						   vol0_stat_inodes);
			--ip->hmp->rootvol->ondisk->vol0_stat_inodes;
			hammer_modify_volume_done(trans.rootvol);
		} else {
			ip->flags &= ~HAMMER_INODE_DELETED;
			Debugger("hammer_ip_delete_range_all errored");
		}
	}

	/*
	 * Flush any queued BIOs.  These will just biodone() the IO's if
	 * the inode has been deleted.
	 */
	while ((bio = TAILQ_FIRST(&ip->bio_list)) != NULL) {
		TAILQ_REMOVE(&ip->bio_list, bio, bio_act);
		tmp_error = hammer_dowrite(&cursor, ip, bio);
		if (tmp_error)
			error = tmp_error;
	}
	ip->sync_flags &= ~HAMMER_INODE_BUFS;

	if (error)
		Debugger("RB_SCAN errored");

	/*
	 * Now update the inode's on-disk inode-data and/or on-disk record.
	 * DELETED and ONDISK are managed only in ip->flags.
	 */
	switch(ip->flags & (HAMMER_INODE_DELETED | HAMMER_INODE_ONDISK)) {
	case HAMMER_INODE_DELETED|HAMMER_INODE_ONDISK:
		/*
		 * If deleted and on-disk, don't set any additional flags.
		 * the delete flag takes care of things.
		 *
		 * Clear flags which may have been set by the frontend.
		 */
		ip->sync_flags &= ~(HAMMER_INODE_RDIRTY|HAMMER_INODE_DDIRTY|
				    HAMMER_INODE_XDIRTY|HAMMER_INODE_ITIMES|
				    HAMMER_INODE_DELETING);
		break;
	case HAMMER_INODE_DELETED:
		/*
		 * Take care of the case where a deleted inode was never
		 * flushed to the disk in the first place.
		 *
		 * Clear flags which may have been set by the frontend.
		 */
		ip->sync_flags &= ~(HAMMER_INODE_RDIRTY|HAMMER_INODE_DDIRTY|
				    HAMMER_INODE_XDIRTY|HAMMER_INODE_ITIMES|
				    HAMMER_INODE_DELETING);
		while (RB_ROOT(&ip->rec_tree)) {
			hammer_record_t record = RB_ROOT(&ip->rec_tree);
			hammer_ref(&record->lock);
			KKASSERT(record->lock.refs == 1);
			record->flags |= HAMMER_RECF_DELETED_FE;
			record->flags |= HAMMER_RECF_DELETED_BE;
			hammer_rel_mem_record(record);
		}
		break;
	case HAMMER_INODE_ONDISK:
		/*
		 * If already on-disk, do not set any additional flags.
		 */
		break;
	default:
		/*
		 * If not on-disk and not deleted, set both dirty flags
		 * to force an initial record to be written.  Also set
		 * the create_tid for the inode.
		 *
		 * Set create_tid in both the frontend and backend
		 * copy of the inode record.
		 */
		ip->ino_rec.base.base.create_tid = trans.tid;
		ip->sync_ino_rec.base.base.create_tid = trans.tid;
		ip->sync_flags |= HAMMER_INODE_RDIRTY | HAMMER_INODE_DDIRTY;
		break;
	}

	/*
	 * If RDIRTY or DDIRTY is set, write out a new record.  If the inode
	 * is already on-disk the old record is marked as deleted.
	 *
	 * If DELETED is set hammer_update_inode() will delete the existing
	 * record without writing out a new one.
	 *
	 * If *ONLY* the ITIMES flag is set we can update the record in-place.
	 */
	if (ip->flags & HAMMER_INODE_DELETED) {
		error = hammer_update_inode(&cursor, ip);
	} else 
	if ((ip->sync_flags & (HAMMER_INODE_RDIRTY | HAMMER_INODE_DDIRTY |
			       HAMMER_INODE_ITIMES)) == HAMMER_INODE_ITIMES) {
		error = hammer_update_itimes(&cursor, ip);
	} else
	if (ip->sync_flags & (HAMMER_INODE_RDIRTY | HAMMER_INODE_DDIRTY |
			      HAMMER_INODE_ITIMES)) {
		error = hammer_update_inode(&cursor, ip);
	}
	if (error)
		Debugger("hammer_update_itimes/inode errored");
done:
	/*
	 * Save the TID we used to sync the inode with to make sure we
	 * do not improperly reuse it.
	 */
	hammer_done_cursor(&cursor);
	hammer_done_transaction(&trans);
	return(error);
}

/*
 * This routine is called when the OS is no longer actively referencing
 * the inode (but might still be keeping it cached), or when releasing
 * the last reference to an inode.
 *
 * At this point if the inode's nlinks count is zero we want to destroy
 * it, which may mean destroying it on-media too.
 */
void
hammer_inode_unloadable_check(hammer_inode_t ip, int getvp)
{
	struct vnode *vp;

	/*
	 * If the inode is on-media and the link count is 0 we MUST delete
	 * it on-media.  DELETING is a mod flag, DELETED is a state flag.
	 */
	if (ip->ino_rec.ino_nlinks == 0 &&
	    (ip->flags & (HAMMER_INODE_DELETING|HAMMER_INODE_DELETED)) == 0) {
		ip->flags |= HAMMER_INODE_DELETING;
		ip->flags |= HAMMER_INODE_TRUNCATED;
		ip->trunc_off = 0;
		vp = NULL;
		if (getvp) {
			if (hammer_get_vnode(ip, &vp) != 0)
				return;
		}
		if (ip->vp) {
			vtruncbuf(ip->vp, 0, HAMMER_BUFSIZE);
			vnode_pager_setsize(ip->vp, 0);
		}
		if (getvp) {
			vput(vp);
		}
	}
}

/*
 * Re-test an inode when a dependancy had gone away to see if we
 * can chain flush it.
 */
void
hammer_test_inode(hammer_inode_t ip)
{
	if (ip->flags & HAMMER_INODE_REFLUSH) {
		ip->flags &= ~HAMMER_INODE_REFLUSH;
		hammer_ref(&ip->lock);
		if (ip->flags & HAMMER_INODE_RESIGNAL) {
			ip->flags &= ~HAMMER_INODE_RESIGNAL;
			hammer_flush_inode(ip, HAMMER_FLUSH_SIGNAL);
		} else {
			hammer_flush_inode(ip, 0);
		}
		hammer_rel_inode(ip, 0);
	}
}