Change sendfile() to use the new m_ext callback scheme for cleaning up after
[dragonfly.git] / sys / sys / agpio.h
... / ...
CommitLineData
1/*-
2 * Copyright (c) 2000 Doug Rabson
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD: src/sys/sys/agpio.h,v 1.1.2.2 2001/12/20 10:36:57 ru Exp $
27 * $DragonFly: src/sys/sys/agpio.h,v 1.3 2003/12/09 23:43:36 drhodus Exp $
28 */
29
30#ifndef _SYS_AGPIO_H_
31#define _SYS_AGPIO_H_
32
33/*
34 * The AGP gatt uses 4k pages irrespective of the host page size.
35 */
36#define AGP_PAGE_SIZE 4096
37#define AGP_PAGE_SHIFT 12
38
39/*
40 * Macros to manipulate AGP mode words.
41 *
42 * SBA = Sideband Address Port
43 * FW = Fast Writes
44 */
45#define AGP_MODE_GET_RQ(x) (((x) & 0xff000000U) >> 24)
46#define AGP_MODE_GET_ARQSZ(x) (((x) & 0x0000e000U) >> 13)
47#define AGP_MODE_GET_CAL(x) (((x) & 0x00001c00U) >> 10)
48#define AGP_MODE_GET_SBA(x) (((x) & 0x00000200U) >> 9)
49#define AGP_MODE_GET_AGP(x) (((x) & 0x00000100U) >> 8)
50#define AGP_MODE_GET_GART_64(x) (((x) & 0x00000080U) >> 7)
51#define AGP_MODE_GET_OVER_4G(x) (((x) & 0x00000020U) >> 5)
52#define AGP_MODE_GET_FW(x) (((x) & 0x00000010U) >> 4)
53#define AGP_MODE_GET_MODE_3(x) (((x) & 0x00000008U) >> 3)
54#define AGP_MODE_GET_RATE(x) ((x) & 0x00000007U)
55#define AGP_MODE_SET_RQ(x,v) (((x) & ~0xff000000U) | ((v) << 24))
56#define AGP_MODE_SET_ARQSZ(x,v) (((x) & ~0x0000e000U) | ((v) << 13))
57#define AGP_MODE_SET_CAL(x,v) (((x) & ~0x00001c00U) | ((v) << 10))
58#define AGP_MODE_SET_SBA(x,v) (((x) & ~0x00000200U) | ((v) << 9))
59#define AGP_MODE_SET_AGP(x,v) (((x) & ~0x00000100U) | ((v) << 8))
60#define AGP_MODE_SET_GART_64(x,v) (((x) & ~0x00000080U) | ((v) << 7))
61#define AGP_MODE_SET_OVER_4G(x,v) (((x) & ~0x00000020U) | ((v) << 5))
62#define AGP_MODE_SET_FW(x,v) (((x) & ~0x00000010U) | ((v) << 4))
63#define AGP_MODE_SET_MODE_3(x,v) (((x) & ~0x00000008U) | ((v) << 3))
64#define AGP_MODE_SET_RATE(x,v) (((x) & ~0x00000007U) | (v))
65#define AGP_MODE_V2_RATE_1x 0x00000001
66#define AGP_MODE_V2_RATE_2x 0x00000002
67#define AGP_MODE_V2_RATE_4x 0x00000004
68#define AGP_MODE_V3_RATE_4x 0x00000001
69#define AGP_MODE_V3_RATE_8x 0x00000002
70#define AGP_MODE_V3_RATE_RSVD 0x00000004
71
72/* XXX: Compat */
73#define AGP_MODE_GET_4G(x) AGP_MODE_GET_OVER_4G(x)
74#define AGP_MODE_SET_4G(x) AGP_MODE_SET_OVER_4G(x)
75#define AGP_MODE_RATE_1x AGP_MODE_V2_RATE_1x
76#define AGP_MODE_RATE_2x AGP_MODE_V2_RATE_2x
77#define AGP_MODE_RATE_4x AGP_MODE_V2_RATE_4x
78
79#define AGPIOC_BASE 'A'
80#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, agp_info)
81#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1)
82#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2)
83#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, agp_setup)
84#if 0
85#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, agp_region)
86#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, agp_region)
87#endif
88#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, agp_allocate)
89#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
90#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, agp_bind)
91#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, agp_unbind)
92
93typedef struct _agp_version {
94 u_int16_t major;
95 u_int16_t minor;
96} agp_version;
97
98typedef struct _agp_info {
99 agp_version version; /* version of the driver */
100 u_int32_t bridge_id; /* bridge vendor/device */
101 u_int32_t agp_mode; /* mode info of bridge */
102 off_t aper_base; /* base of aperture */
103 size_t aper_size; /* size of aperture */
104 size_t pg_total; /* max pages (swap + system) */
105 size_t pg_system; /* max pages (system) */
106 size_t pg_used; /* current pages used */
107} agp_info;
108
109typedef struct _agp_setup {
110 u_int32_t agp_mode; /* mode info of bridge */
111} agp_setup;
112
113#if 0
114/*
115 * The "prot" down below needs still a "sleep" flag somehow ...
116 */
117typedef struct _agp_segment {
118 off_t pg_start; /* starting page to populate */
119 size_t pg_count; /* number of pages */
120 int prot; /* prot flags for mmap */
121} agp_segment;
122
123typedef struct _agp_region {
124 pid_t pid; /* pid of process */
125 size_t seg_count; /* number of segments */
126 struct _agp_segment *seg_list;
127} agp_region;
128#endif
129
130typedef struct _agp_allocate {
131 int key; /* tag of allocation */
132 size_t pg_count; /* number of pages */
133 u_int32_t type; /* 0 == normal, other devspec */
134 u_int32_t physical; /* device specific (some devices
135 * need a phys address of the
136 * actual page behind the gatt
137 * table) */
138} agp_allocate;
139
140typedef struct _agp_bind {
141 int key; /* tag of allocation */
142 off_t pg_start; /* starting page to populate */
143} agp_bind;
144
145typedef struct _agp_unbind {
146 int key; /* tag of allocation */
147 u_int32_t priority; /* priority for paging out */
148} agp_unbind;
149
150#endif /* !_SYS_AGPIO_H_ */