amr(4): Sync with FreeBSD.
[dragonfly.git] / sys / config / X86_64_GENERIC
... / ...
CommitLineData
1#
2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6
7platform pc64
8machine x86_64
9machine_arch x86_64
10cpu HAMMER_CPU
11ident X86_64_GENERIC
12maxusers 0
13
14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
15
16options INET #InterNETworking
17options INET6 #IPv6 communications protocols
18options HAMMER #Hammer Filesystem
19options NULLFS #NULL filesystem
20options FFS #Berkeley Fast Filesystem
21options FFS_ROOT #FFS usable as root device [keep this!]
22options SOFTUPDATES #Enable FFS soft updates support
23options UFS_DIRHASH #Improve performance on big directories
24options MFS #Memory Filesystem
25options TMPFS #Temporary Filesystem
26options MD_ROOT #MD is a potential root device
27options NFS #Network Filesystem
28options NFS_ROOT #NFS usable as root device, NFS required
29options MSDOSFS #MSDOS Filesystem
30options CD9660 #ISO 9660 Filesystem
31options PROCFS #Process filesystem
32options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
33options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
34options DEVICE_POLLING # Support mixed interrupt-polling
35 # handling of network device drivers
36options UCONSOLE #Allow users to grab the console
37options KTRACE #ktrace(1) support
38options SYSVSHM #SYSV-style shared memory
39options SYSVMSG #SYSV-style message queues
40options SYSVSEM #SYSV-style semaphores
41options P1003_1B #Posix P1003_1B real-time extensions
42options _KPOSIX_PRIORITY_SCHEDULING
43options ICMP_BANDLIM #Rate limit bad replies
44options KBD_INSTALL_CDEV # install a CDEV entry in /dev
45options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
46 # output. Adds ~128k to driver.
47options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
48 # output. Adds ~215k to driver.
49options DSCHED_FQ # Fair-queuing disk scheduler
50
51# ALTQ
52options ALTQ #alternate queueing
53options ALTQ_CBQ #class based queueing
54options ALTQ_RED #random early detection
55options ALTQ_RIO #triple red for diffserv (needs RED)
56options ALTQ_HFSC #hierarchical fair service curve
57options ALTQ_PRIQ #priority queue
58options ALTQ_FAIRQ #fair queueing
59#options ALTQ_NOPCC #don't use processor cycle counter
60#options ALTQ_DEBUG #for debugging
61
62
63# SMP boxes should normally be build with SMP and APIC_IO. If SMP has
64# interrupt routing problems in APIC_IO you can disable it with the
65# hw.apic_io_enable=0 tunable or by building without the APIC_IO option.
66#
67#
68#options SMP # Symmetric MultiProcessor Kernel
69#options APIC_IO # hw.apic_io_enable = 1 by default
70
71# Debugging for Development
72options DDB
73options DDB_TRACE
74options INVARIANTS
75
76device isa
77device pci
78
79# AHCI driver, this will override NATA for AHCI devices,
80# both drivers may be included.
81#
82device ahci
83
84# SiI3124/3132 driver
85#
86device sili
87
88# NEW-ATA (NATA) and ATAPI devices
89#
90device nata
91device natadisk # ATA disk drives
92device natapicd # ATAPI CDROM drives
93device natapifd # ATAPI floppy drives
94device natapist # ATAPI tape drives
95device natapicam # Emulate ATAPI devices as SCSI
96device nataraid # support for ATA software RAID
97 # controllers
98device natausb # ATA-over-USB support
99options ATA_STATIC_ID # Static device numbering
100
101# LEGACY ATA and ATAPI devices
102#device ata0 at isa? port IO_WD1 irq 14
103#device ata1 at isa? port IO_WD2 irq 15
104#device ata
105#device atadisk # ATA disk drives
106#device atapicd # ATAPI CDROM drives
107#device atapifd # ATAPI floppy drives
108#device atapist # ATAPI tape drives
109#device atapicam # Emulate ATAPI devices as SCSI via CAM
110#options ATA_STATIC_ID #Static device numbering
111
112# SCSI Controllers
113device ahb # EISA AHA1742 family
114device ahc # AHA2940 and onboard AIC7xxx devices
115device ahd # AHA39320/29320 and onboard AIC79xx devices
116device amd # AMD 53C974 (Tekram DC-390(T))
117device isp # Qlogic family
118device mpt # LSI-Logic MPT/Fusion
119device ncr # NCR/Symbios Logic
120device sym # NCR/Symbios Logic (newer chipsets)
121options SYM_SETUP_LP_PROBE_MAP=0x40
122 # Allow ncr to attach legacy NCR devices when
123 # both sym and ncr are configured
124
125device adv0 at isa?
126device adw
127device bt0 at isa?
128device aha0 at isa?
129device aic0 at isa?
130
131device ncv # NCR 53C500
132device nsp # Workbit Ninja SCSI-3
133device stg # TMC 18C30/18C50
134
135# SCSI peripherals
136device scbus # SCSI bus (required)
137device da # Direct Access (disks)
138device sa # Sequential Access (tape etc)
139device cd # CD
140device pass # Passthrough device (direct SCSI access)
141device sg # Passthrough device (linux scsi generic)
142
143# RAID controllers interfaced to the SCSI subsystem
144device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
145device dpt # DPT Smartcache - See LINT for options!
146device iir # Intel Integrated RAID
147device mly # Mylex AcceleRAID/eXtremeRAID
148device ciss # Compaq SmartRAID 5* series
149
150# RAID controllers
151device aac # Adaptec FSA RAID, Dell PERC2/PERC3
152#device aacp # SCSI passthrough for aac (requires CAM)
153device ida # Compaq Smart RAID
154device ips # IBM ServeRAID
155device amr # AMI MegaRAID
156device amrp # SCSI Passthrough interface (optional, CAM req.)
157device mlx # Mylex DAC960 family
158device mfi # LSI MegaRAID SAS
159device mfip # LSI MegaRAID SAS passthrough, requires CAM
160device twe # 3ware Escalade 7000/8000's
161device twa # 3ware 9000 series PATA/SATA RAID
162
163#
164# Areca RAID (CAM is required).
165#
166device arcmsr # Areca SATA II RAID
167
168# atkbdc0 controls both the keyboard and the PS/2 mouse
169device atkbdc0 at isa? port IO_KBD
170device atkbd0 at atkbdc? irq 1 flags 0x1
171device psm0 at atkbdc? irq 12
172
173device vga0 at isa?
174
175# kbdmux is the keyboard multiplexer
176device kbdmux
177
178# splash screen/screen saver
179pseudo-device splash
180
181# syscons is the default console driver, resembling an SCO console
182device sc0 at isa? flags 0x100
183options SC_PIXEL_MODE # add support for the raster text mode
184
185device agp # support several AGP chipsets
186
187# HW monitoring devices
188device aps0 at isa? port 0x1600
189device lm0 at isa? port 0x290
190device it0 at isa? port 0x290
191device it1 at isa? port 0xc00
192device it2 at isa? port 0xd00
193device it3 at isa? port 0x228
194device wbsio0 at isa? port 0x2e
195device wbsio1 at isa? port 0x4e
196device lm#3 at wbsio?
197
198# PCCARD (PCMCIA) support
199device pccard
200device cardbus
201device cbb
202
203# Serial (COM) ports
204device sio0 at isa? port IO_COM1 flags 0x10 irq 4
205device sio1 at isa? port IO_COM2 irq 3
206device sio2 at isa? disable port IO_COM3 irq 5
207device sio3 at isa? disable port IO_COM4 irq 9
208
209# Parallel port
210device ppc0 at isa? irq 7
211device ppbus # Parallel port bus (required)
212device lpt # Printer
213device plip # TCP/IP over parallel
214device ppi # Parallel port interface device
215#device vpo # Requires scbus and da
216
217
218# PCI Ethernet NICs.
219device de # DEC/Intel DC21x4x (``Tulip'')
220device txp # 3Com 3cR990 (``Typhoon'')
221device vx # 3Com 3c590, 3c595 (``Vortex'')
222
223device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
224 # Requires ig_hal
225device ig_hal # Intel PRO/1000 hardware abstraction layer
226
227# PCI Ethernet NICs that use the common MII bus controller code.
228# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
229device miibus # MII bus support
230device ae # Attansic/Atheros L2 Fast Ethernet
231device age # Attansic/Atheros L1 Gigabit Ethernet
232device alc # Atheros AR8131/AR8132
233device ale # Atheros AR8121/AR8113/AR8114
234device bce # Broadcom NetXtreme II Gigabit Ethernet
235device bfe # Broadcom BCM440x 10/100 Ethernet
236device dc # DEC/Intel 21143 and various workalikes
237device et # Agere ET1310 10/100/1000 Ethernet
238device fxp # Intel EtherExpress PRO/100B (82557, 82558)
239device jme # JMicron Gigabit/Fast Ethernet
240device pcn # AMD Am79C97x PCI 10/100 NICs
241device rl # RealTek 8129/8139
242device re # RealTek 8139C+/8169
243device sf # Adaptec AIC-6915 (``Starfire'')
244device sis # Silicon Integrated Systems SiS 900/SiS 7016
245device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
246device ste # Sundance ST201 (D-Link DFE-550TX)
247device tl # Texas Instruments ThunderLAN
248device tx # SMC EtherPower II (83c170 ``EPIC'')
249device vge # VIA 612x GigE
250device vr # VIA Rhine, Rhine II
251device wb # Winbond W89C840F
252device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
253device bge # Broadcom BCM570x (``Tigon III'')
254device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
255device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
256device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
257
258# ISA Ethernet NICs.
259# 'device ed' requires 'device miibus'
260device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
261device ex
262# Xircom Ethernet
263device xe
264
265# Wireless NIC cards
266options IEEE80211_DEBUG #enable debugging msgs
267options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
268options IEEE80211_SUPPORT_TDMA #enable TDMA support
269device wlan # 802.11 support
270device wlan_ccmp # 802.11 CCMP support
271device wlan_tkip # 802.11 TKIP support
272device wlan_wep # 802.11 WEP support
273#device wlan_amrr # AMRR
274
275# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
276# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
277# mode (the factory default). If you set the switches on your ISA
278# card for a manually chosen I/O address and IRQ, you must specify
279# those parameters here.
280device an
281device ral # Ralink Technology 802.11 wireless NIC
282#device rtw # RealTek 802.11 wireless NIC
283# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
284# exists only as a PCMCIA device, so there is no ISA attachment needed
285# and resources will always be dynamically assigned by the pccard code.
286device wi
287
288# The probe order of these is presently determined by i386/isa/isa_compat.c.
289#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
290device lnc0 at isa? disable port 0x280 irq 10 drq 0
291device cs0 at isa? disable port 0x300
292device sn0 at isa? disable port 0x300 irq 10
293
294# Pseudo devices - the number indicates how many units to allocate.
295pseudo-device loop # Network loopback
296pseudo-device ether # Ethernet support
297pseudo-device sl 1 # Kernel SLIP
298pseudo-device ppp 1 # Kernel PPP
299pseudo-device tun # Packet tunnel.
300pseudo-device pty # Pseudo-ttys (telnet etc)
301pseudo-device md # Memory "disks"
302pseudo-device gif # IPv6 and IPv4 tunneling
303pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
304
305# The `bpf' pseudo-device enables the Berkeley Packet Filter.
306# Be aware of the administrative consequences of enabling this!
307pseudo-device bpf #Berkeley packet filter
308
309pseudo-device crypto # core crypto support, used by wlan
310
311# USB support
312device uhci # UHCI PCI->USB interface
313device ohci # OHCI PCI->USB interface
314device usb # USB Bus (required)
315device ugen # Generic
316device uhid # "Human Interface Devices"
317device ukbd # Keyboard
318device ulpt # Printer
319device umass # Disks/Mass storage - Requires scbus and da
320device ums # Mouse
321device uscanner # Scanners
322device urio # Diamond Rio MP3 Player
323# USB Ethernet, requires mii
324device aue # ADMtek USB ethernet
325device axe # ASIX Electronics USB Ethernet
326device cue # CATC USB ethernet
327device kue # Kawasaki LSI USB ethernet
328device rue # RealTek 8150 based USB ethernet
329# USB wireless NICs, requires wlan, wlan_amrr
330#device rum # Ralink Technology RT2501USB/RT2601USB
331#device ural # Ralink Technology RT2500USB
332
333# FireWire support
334device firewire # FireWire bus code
335device sbp # SCSI over FireWire (Requires scbus and da)
336device fwe # Ethernet over FireWire (non-standard!)