ath - Temporarily remove ath from kernel build
[dragonfly.git] / sys / config / GENERIC
... / ...
CommitLineData
1#
2# GENERIC -- Generic kernel configuration file for DragonFly/i386
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6
7platform pc32
8machine i386
9machine_arch i386
10cpu I486_CPU
11cpu I586_CPU
12cpu I686_CPU
13ident GENERIC
14maxusers 0
15
16makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
17
18options MATH_EMULATE #Support for x87 emulation
19options INET #InterNETworking
20options INET6 #IPv6 communications protocols
21options HAMMER #Hammer Filesystem
22options NULLFS #NULL filesystem
23options FFS #Berkeley Fast Filesystem
24options FFS_ROOT #FFS usable as root device [keep this!]
25options SOFTUPDATES #Enable FFS soft updates support
26options UFS_DIRHASH #Improve performance on big directories
27options MFS #Memory Filesystem
28options TMPFS #Temporary Filesystem
29options MD_ROOT #MD is a potential root device
30options NFS #Network Filesystem
31options NFS_ROOT #NFS usable as root device, NFS required
32options MSDOSFS #MSDOS Filesystem
33options CD9660 #ISO 9660 Filesystem
34options PROCFS #Process filesystem
35#options COMPAT_43 #Compatible with BSD 4.3
36options COMPAT_DF12 #Compatible with DragonFly up to 1.2
37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38options IFPOLL_ENABLE # Support mixed interrupt-polling
39 # handling of network device drivers
40options UCONSOLE #Allow users to grab the console
41options USERCONFIG #boot -c editor
42options VISUAL_USERCONFIG #visual boot -c editor
43options KTRACE #ktrace(1) support
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49options ICMP_BANDLIM #Rate limit bad replies
50options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55options DSCHED_FQ # Fair-queuing disk scheduler
56
57# ALTQ
58options ALTQ #alternate queueing
59options ALTQ_CBQ #class based queueing
60options ALTQ_RED #random early detection
61options ALTQ_RIO #triple red for diffserv (needs RED)
62options ALTQ_HFSC #hierarchical fair service curve
63options ALTQ_PRIQ #priority queue
64options ALTQ_FAIRQ #fair queueing
65#options ALTQ_NOPCC #don't use processor cycle counter
66#options ALTQ_DEBUG #for debugging
67
68# Debugging for Development
69options DDB
70options DDB_TRACE
71options INVARIANTS
72
73device isa
74device pci
75
76# Floppy drives
77device fdc0 at isa? port IO_FD1 irq 6 drq 2
78device fd0 at fdc0 drive 0
79device fd1 at fdc0 drive 1
80#
81# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
82# don't use the above line for fdc0 but the following one:
83#device fdc0
84
85# AHCI driver, this will override NATA for AHCI devices,
86# both drivers may be included.
87#
88device ahci
89
90# SiI3124/3132 driver
91#
92device sili
93
94# NEW-ATA (NATA) and ATAPI devices
95#
96device nata
97device natadisk # ATA disk drives
98device natapicd # ATAPI CDROM drives
99device natapifd # ATAPI floppy drives
100device natapist # ATAPI tape drives
101device natapicam # Emulate ATAPI devices as SCSI
102device nataraid # support for ATA software RAID
103 # controllers
104device natausb # ATA-over-USB support
105options ATA_STATIC_ID # Static device numbering
106
107# SCSI Controllers
108device ahc # AHA2940 and onboard AIC7xxx devices
109device ahd # AHA39320/29320 and onboard AIC79xx devices
110device amd # AMD 53C974 (Tekram DC-390(T))
111device isp # Qlogic family
112#device ispfw # Firmware for QLogic HBAs- normally a module
113device mpt # LSI-Logic MPT/Fusion
114device mps # LSI-Logic MPT-Fusion 2
115device ncr # NCR/Symbios Logic
116device sym # NCR/Symbios Logic (newer chipsets)
117options SYM_SETUP_LP_PROBE_MAP=0x40
118 # Allow ncr to attach legacy NCR devices when
119 # both sym and ncr are configured
120
121device adv0 at isa?
122device adw
123device bt
124device aic
125
126device ncv # NCR 53C500
127device nsp # Workbit Ninja SCSI-3
128device stg # TMC 18C30/18C50
129
130# SCSI peripherals
131device scbus # SCSI bus (required)
132device da # Direct Access (disks)
133device sa # Sequential Access (tape etc)
134device cd # CD
135device pass # Passthrough device (direct SCSI access)
136device sg # Passthrough device (linux scsi generic)
137
138# RAID controllers interfaced to the SCSI subsystem
139device arcmsr # Areca SATA II RAID
140device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
141device ciss # Compaq SmartRAID 5* series
142device dpt # DPT Smartcache - See LINT for options!
143device "hpt27xx" # Highpoint RocketRAID 27xx series
144device hptiop # Highpoint RocketRAID 3xxx series
145device hptmv # Highpoint RocketRAID 182x
146device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
147device iir # Intel Integrated RAID
148device mly # Mylex AcceleRAID/eXtremeRAID
149device twa # 3ware 9000 series PATA/SATA RAID
150device tws # 3ware 9750 series SATA/SAS RAID
151
152# RAID controllers
153device aac # Adaptec FSA RAID, Dell PERC2/PERC3
154device aacp # SCSI passthrough for aac (requires CAM)
155device amr # AMI MegaRAID
156device amrp # SCSI Passthrough interface (optional, CAM req.)
157device ida # Compaq Smart RAID
158device ips # IBM ServeRAID
159device mlx # Mylex DAC960 family
160device mfi # LSI MegaRAID SAS
161device mfip # LSI MegaRAID SAS passthrough, requires CAM
162device pst # Promise Supertrack
163device twe # 3ware Escalade 7000/8000's
164
165# VirtIO support
166device virtio # VirtIO core
167device virtio_blk # VirtIO disk driver
168device virtio_pci # VirtIO transport over PCI bus
169
170# atkbdc0 controls both the keyboard and the PS/2 mouse
171device atkbdc0 at isa? port IO_KBD
172device atkbd0 at atkbdc? irq 1
173device psm0 at atkbdc? irq 12
174
175device vga0 at isa?
176
177# kbdmux is the keyboard multiplexer
178device kbdmux
179
180# splash screen/screen saver
181pseudo-device splash
182
183# syscons is the default console driver, resembling an SCO console
184device sc0 at isa? flags 0x100
185options SC_PIXEL_MODE # add support for the raster text mode
186
187device agp # support several AGP chipsets
188
189# Floating point support - do not disable.
190device npx0 at nexus? port IO_NPX irq 13
191
192# Power management support (see LINT for more options)
193device apm0 at nexus? disable flags 0x20 # Advanced Power Management
194
195# HW monitoring devices
196#device aps0 at isa? port 0x1600
197device lm0 at isa? port 0x290
198device it0 at isa? port 0x290
199device it1 at isa? port 0xc00
200device it2 at isa? port 0xd00
201device it3 at isa? port 0x228
202device wbsio0 at isa? port 0x2e
203device wbsio1 at isa? port 0x4e
204device lm#3 at wbsio?
205
206# PCCARD (PCMCIA) support
207device pccard
208device cardbus
209device cbb
210
211# Serial (COM) ports
212device sio0 at isa? port IO_COM1 flags 0x10 irq 4
213device sio1 at isa? port IO_COM2 irq 3
214device sio2 at isa? disable port IO_COM3 irq 5
215device sio3 at isa? disable port IO_COM4 irq 9
216
217# Parallel port
218device ppc0 at isa? irq 7
219device ppbus # Parallel port bus (required)
220device lpt # Printer
221device plip # TCP/IP over parallel
222device ppi # Parallel port interface device
223#device vpo # Requires scbus and da
224
225# PCI Ethernet NICs.
226device de # DEC/Intel DC21x4x (``Tulip'')
227device txp # 3Com 3cR990 (``Typhoon'')
228device vx # 3Com 3c590, 3c595 (``Vortex'')
229
230device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
231 # Requires ig_hal
232device igb # Intel Pro/1000 (82575, 82576, 82580, i350)
233 # Requires ig_hal
234device ig_hal # Intel PRO/1000 hardware abstraction layer
235device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
236
237device oce # Emulex OneConnect 10Gb
238
239# PCI Ethernet NICs that use the common MII bus controller code.
240# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
241device miibus # MII bus support
242device ae # Attansic/Atheros L2 Fast Ethernet
243device age # Attansic/Atheros L1 Gigabit Ethernet
244device alc # Atheros AR8131/AR8132
245device ale # Atheros AR8121/AR8113/AR8114
246device bce # Broadcom NetXtreme II Gigabit Ethernet
247device bfe # Broadcom BCM440x 10/100 Ethernet
248device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet
249device dc # DEC/Intel 21143 and various workalikes
250device et # Agere ET1310 10/100/1000 Ethernet
251device fxp # Intel EtherExpress PRO/100B (82557, 82558)
252device jme # JMicron Gigabit/Fast Ethernet
253device pcn # AMD Am79C97x PCI 10/100 NICs
254device rl # RealTek 8129/8139
255device re # RealTek 8139C+/8169
256device sf # Adaptec AIC-6915 (``Starfire'')
257device sis # Silicon Integrated Systems SiS 900/SiS 7016
258device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
259device ste # Sundance ST201 (D-Link DFE-550TX)
260device tl # Texas Instruments ThunderLAN
261device tx # SMC EtherPower II (83c170 ``EPIC'')
262device vge # VIA 612x GigE
263device vr # VIA Rhine, Rhine II
264device wb # Winbond W89C840F
265device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
266device bge # Broadcom BCM570x (``Tigon III'')
267device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
268device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
269device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
270
271# ISA Ethernet NICs.
272# 'device ed' requires 'device miibus'
273device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
274device ex
275device ep
276device fe0 at isa? disable port 0x300
277# Xircom Ethernet
278device xe
279
280# Wireless NIC cards
281options IEEE80211_DEBUG #enable debugging msgs
282options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
283options IEEE80211_SUPPORT_TDMA #enable TDMA support
284device wlan # 802.11 support
285device wlan_ccmp # 802.11 CCMP support
286device wlan_tkip # 802.11 TKIP support
287device wlan_wep # 802.11 WEP support
288#device wlan_amrr # AMRR
289
290# All wireless NICs require wlan and wlan_amrr
291# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
292# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
293# mode (the factory default). If you set the switches on your ISA
294# card for a manually chosen I/O address and IRQ, you must specify
295# those parameters here.
296device an
297#device ath # Atheros NICs
298#device ath_hal # Atheros Hardware Access Layer
299#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
300#device ath_rate_sample # Atheros Sample TX rate control algorithm
301device ral # Ralink Technology 802.11 wireless NIC
302device iwn # Intel
303#device rtw # RealTek 802.11 wireless NIC
304# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
305# exists only as a PCMCIA device, so there is no ISA attachment needed
306# and resources will always be dynamically assigned by the pccard code.
307device wi
308
309device lnc0 at isa? disable port 0x280 irq 10 drq 0
310device cs0 at isa? disable port 0x300
311device sn0 at isa? disable port 0x300 irq 10
312
313# Pseudo devices - the number indicates how many units to allocate.
314pseudo-device loop # Network loopback
315pseudo-device ether # Ethernet support
316pseudo-device sl 1 # Kernel SLIP
317pseudo-device ppp 1 # Kernel PPP
318pseudo-device tun # Packet tunnel.
319pseudo-device pty # Pseudo-ttys (telnet etc)
320pseudo-device md # Memory "disks"
321pseudo-device gif # IPv6 and IPv4 tunneling
322pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
323
324# CARP support
325options CARP
326pseudo-device carp
327
328# The `bpf' pseudo-device enables the Berkeley Packet Filter.
329# Be aware of the administrative consequences of enabling this!
330pseudo-device bpf #Berkeley packet filter
331
332pseudo-device crypto # core crypto support, used by wlan
333pseudo-device cryptodev
334
335# USB support
336device uhci # UHCI PCI->USB interface
337device ohci # OHCI PCI->USB interface
338device usb # USB Bus (required)
339#device "usb4bsd" # use this instead of usb for the new stack
340device ugen # Generic
341device uhid # "Human Interface Devices"
342device ukbd # Keyboard
343device ulpt # Printer
344device umass # Disks/Mass storage - Requires scbus and da
345device ums # Mouse
346device uscanner # Scanners
347device urio # Diamond Rio MP3 Player
348# USB Ethernet, requires mii
349device aue # ADMtek USB ethernet
350device axe # ASIX Electronics USB Ethernet
351device cue # CATC USB ethernet
352device kue # Kawasaki LSI USB ethernet
353device rue # RealTek 8150 based USB ethernet
354# USB wireless NICs, requires wlan, wlan_amrr
355#device rum # Ralink Technology RT2501USB/RT2601USB
356#device ural # Ralink Technology RT2500USB
357
358# FireWire support
359device firewire # FireWire bus code
360device sbp # SCSI over FireWire (Requires scbus and da)
361device fwe # Ethernet over FireWire (non-standard!)
362
363# MMC/SD
364device mmc
365device mmcsd
366device sdhci