Hardwire i386 instead of using the borken machine variable

[dragonfly.git] / sys / dev / disk / aha / aha_isa.c

/*
 * Product specific probe and attach routines for:
 *      Adaptec 154x.
 *
 * Derived from code written by:
 *
 * Copyright (c) 1998 Justin T. Gibbs
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification, immediately at the beginning of the file.
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD: src/sys/dev/aha/aha_isa.c,v 1.17.2.1 2000/08/02 22:24:40 peter Exp $
 * $DragonFly: src/sys/dev/disk/aha/aha_isa.c,v 1.2 2003/06/17 04:28:21 dillon Exp $
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>

#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/rman.h>

#include <isa/isavar.h>

#include <dev/aha/ahareg.h>

#include <cam/scsi/scsi_all.h>

static struct isa_pnp_id aha_ids[] = {
	{ADP0100_PNP,		"Adaptec 1540/1542 ISA SCSI"},	/* ADP0100 */
	{AHA1540_PNP,		"Adaptec 1540/aha-1640/aha-1535"},/* ADP1542 */
	{AHA1542_PNP,		"Adaptec 1542/aha-1535"},	/* ADP1542 */
	{AHA1542_PNPCOMPAT,	"Adaptec 1542 compatible"},	/* PNP00A0 */
	{ICU0091_PNP,		"Adaptec AHA-1540/1542 SCSI"},	/* ICU0091 */
	{0}
};

/*
 * Check if the device can be found at the port given
 * and if so, set it up ready for further work
 * as an argument, takes the isa_device structure from
 * autoconf.c
 */
static int
aha_isa_probe(device_t dev)
{
	/*
	 * find unit and check we have that many defined
	 */
	struct	aha_softc **sc = device_get_softc(dev);
	struct	aha_softc *aha;
	int	port_index;
	int	max_port_index;
	int	error;
	u_long	port_start, port_count;
	struct resource *port_res;
	int	port_rid;
	int	drq;
	int	irq;

	aha = NULL;

	/* Check isapnp ids */
	if (ISA_PNP_PROBE(device_get_parent(dev), dev, aha_ids) == ENXIO)
		return (ENXIO);

	error = bus_get_resource(dev, SYS_RES_IOPORT, 0,
				 &port_start, &port_count);
	if (error != 0)
		port_start = 0;

	/*
	 * Bound our board search if the user has
	 * specified an exact port.
	 */
	aha_find_probe_range(port_start, &port_index, &max_port_index);

	if (port_index < 0)
		return ENXIO;

	/* Attempt to find an adapter */
	for (;port_index <= max_port_index; port_index++) {
		config_data_t config_data;
		u_int ioport;
		int error;

		ioport = aha_iop_from_bio(port_index);

		error = bus_set_resource(dev, SYS_RES_IOPORT, 0,
					 ioport, AHA_NREGS);
		if (error)
			return error;
		
		port_rid = 0;
		port_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &port_rid,
		    0, ~0, AHA_NREGS, RF_ACTIVE);
		if (!port_res)
			continue;

		/* Allocate a softc for use during probing */
		aha = aha_alloc(device_get_unit(dev), rman_get_bustag(port_res),
		    rman_get_bushandle(port_res));

		if (aha == NULL) {
			bus_release_resource(dev, SYS_RES_IOPORT, port_rid, 
			    port_res);
			break;
		}

		/* See if there is really a card present */
		if (aha_probe(aha) || aha_fetch_adapter_info(aha)) {
			aha_free(aha);
			bus_release_resource(dev, SYS_RES_IOPORT, port_rid,
			    port_res);
			continue;
		}

		/*
		 * Determine our IRQ, and DMA settings and
		 * export them to the configuration system.
		 */
		error = aha_cmd(aha, AOP_INQUIRE_CONFIG, NULL, /*parmlen*/0,
		    (u_int8_t*)&config_data, sizeof(config_data), 
		    DEFAULT_CMD_TIMEOUT);

		if (error != 0) {
			printf("aha_isa_probe: Could not determine IRQ or DMA "
			    "settings for adapter at 0x%x.  Failing probe\n",
			    ioport);
			aha_free(aha);
			bus_release_resource(dev, SYS_RES_IOPORT, port_rid, 
			    port_res);
			continue;
		}

		bus_release_resource(dev, SYS_RES_IOPORT, port_rid, port_res);

		switch (config_data.dma_chan) {
		case DMA_CHAN_5:
			drq = 5;
			break;
		case DMA_CHAN_6:
			drq = 6;
			break;
		case DMA_CHAN_7:
			drq = 7;
			break;
		default:
			printf("aha_isa_probe: Invalid DMA setting "
			    "detected for adapter at 0x%x.  "
			    "Failing probe\n", ioport);
			return (ENXIO);
		}
		error = bus_set_resource(dev, SYS_RES_DRQ, 0, drq, 1);
		if (error)
			return error;

		irq = ffs(config_data.irq) + 8;
		error = bus_set_resource(dev, SYS_RES_IRQ, 0, irq, 1);
		if (error)
			return error;

		*sc = aha;
		aha_unit++;

		return (0);
	}

	return (ENXIO);
}

/*
 * Attach all the sub-devices we can find
 */
static int
aha_isa_attach(device_t dev)
{
	struct	aha_softc **sc = device_get_softc(dev);
	struct	aha_softc *aha;
	bus_dma_filter_t *filter;
	void		 *filter_arg;
	bus_addr_t	 lowaddr;
	void		 *ih;
	int		 error;

	aha = *sc;
	aha->portrid = 0;
	aha->port = bus_alloc_resource(dev, SYS_RES_IOPORT, &aha->portrid,
	    0, ~0, AHA_NREGS, RF_ACTIVE);
	if (!aha->port) {
		device_printf(dev, "Unable to allocate I/O ports\n");
		return ENOMEM;
	}

	aha->irqrid = 0;
	aha->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &aha->irqrid, 0, ~0, 1,
	    RF_ACTIVE);
	if (!aha->irq) {
		device_printf(dev, "Unable to allocate excluse use of irq\n");
		bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
		return ENOMEM;
	}

	aha->drqrid = 0;
	aha->drq = bus_alloc_resource(dev, SYS_RES_DRQ, &aha->drqrid, 0, ~0, 1,
	    RF_ACTIVE);
	if (!aha->drq) {
		device_printf(dev, "Unable to allocate drq\n");
		bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
		bus_release_resource(dev, SYS_RES_IRQ, aha->irqrid, aha->irq);
		return ENOMEM;
	}

#if 0				/* is the drq ever unset? */
	if (dev->id_drq != -1)
		isa_dmacascade(dev->id_drq);
#endif
	isa_dmacascade(rman_get_start(aha->drq));

	/* Allocate our parent dmatag */
	filter = NULL;
	filter_arg = NULL;
	lowaddr = BUS_SPACE_MAXADDR_24BIT;

	if (bus_dma_tag_create(/*parent*/NULL, /*alignemnt*/1, /*boundary*/0,
	    lowaddr, /*highaddr*/BUS_SPACE_MAXADDR,
	    filter, filter_arg,
	    /*maxsize*/BUS_SPACE_MAXSIZE_24BIT,
	    /*nsegments*/BUS_SPACE_UNRESTRICTED,
	    /*maxsegsz*/BUS_SPACE_MAXSIZE_24BIT,
	    /*flags*/0, &aha->parent_dmat) != 0) {
                aha_free(aha);
		bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
		bus_release_resource(dev, SYS_RES_IRQ, aha->irqrid, aha->irq);
		bus_release_resource(dev, SYS_RES_DRQ, aha->drqrid, aha->drq);
                return (ENOMEM);
        }                              

        if (aha_init(aha)) {
		device_printf(dev, "init failed\n");
                aha_free(aha);
		bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
		bus_release_resource(dev, SYS_RES_IRQ, aha->irqrid, aha->irq);
		bus_release_resource(dev, SYS_RES_DRQ, aha->drqrid, aha->drq);
                return (ENOMEM);
        }

	error = aha_attach(aha);
	if (error) {
		device_printf(dev, "attach failed\n");
                aha_free(aha);
		bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
		bus_release_resource(dev, SYS_RES_IRQ, aha->irqrid, aha->irq);
		bus_release_resource(dev, SYS_RES_DRQ, aha->drqrid, aha->drq);
                return (error);
	}

	error = bus_setup_intr(dev, aha->irq, INTR_TYPE_CAM, aha_intr, aha,
	    &ih);
	if (error) {
		device_printf(dev, "Unable to register interrupt handler\n");
                aha_free(aha);
		bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
		bus_release_resource(dev, SYS_RES_IRQ, aha->irqrid, aha->irq);
		bus_release_resource(dev, SYS_RES_DRQ, aha->drqrid, aha->drq);
                return (error);
	}

	return (0);
}

static int
aha_isa_detach(device_t dev)
{
	struct aha_softc *aha = *(struct aha_softc **) device_get_softc(dev);
	int error;

	error = bus_teardown_intr(dev, aha->irq, aha->ih);
	if (error) {
		device_printf(dev, "failed to unregister interrupt handler\n");
	}

	bus_release_resource(dev, SYS_RES_IOPORT, aha->portrid, aha->port);
	bus_release_resource(dev, SYS_RES_IRQ, aha->irqrid, aha->irq);
	bus_release_resource(dev, SYS_RES_DRQ, aha->drqrid, aha->drq);

	error = aha_detach(aha);
	if (error) {
		device_printf(dev, "detach failed\n");
		return (error);
	}
	aha_free(aha);

	return (0);
}

static void
aha_isa_identify(driver_t *driver, device_t parent)
{
}

static device_method_t aha_isa_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		aha_isa_probe),
	DEVMETHOD(device_attach,	aha_isa_attach),
	DEVMETHOD(device_detach,	aha_isa_detach),
	DEVMETHOD(device_identify,	aha_isa_identify),

	{ 0, 0 }
};

static driver_t aha_isa_driver = {
	"aha",
	aha_isa_methods,
	sizeof(struct aha_softc*),
};

static devclass_t aha_devclass;

DRIVER_MODULE(aha, isa, aha_isa_driver, aha_devclass, 0, 0);