Move isonum_ declaration to iso.h
[dragonfly.git] / sys / config / GENERIC
... / ...
CommitLineData
1#
2# GENERIC -- Generic kernel configuration file for DragonFly/i386
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6#
7# $DragonFly: src/sys/config/GENERIC,v 1.60 2008/07/26 14:26:30 sephe Exp $
8
9platform pc32
10machine i386
11machine_arch i386
12cpu I486_CPU
13cpu I586_CPU
14cpu I686_CPU
15ident GENERIC
16maxusers 0
17
18makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
19
20options MATH_EMULATE #Support for x87 emulation
21options INET #InterNETworking
22options INET6 #IPv6 communications protocols
23options HAMMER #Hammer Filesystem
24options FFS #Berkeley Fast Filesystem
25options FFS_ROOT #FFS usable as root device [keep this!]
26options SOFTUPDATES #Enable FFS soft updates support
27options UFS_DIRHASH #Improve performance on big directories
28options MFS #Memory Filesystem
29options MD_ROOT #MD is a potential root device
30options NFS #Network Filesystem
31options NFS_ROOT #NFS usable as root device, NFS required
32options MSDOSFS #MSDOS Filesystem
33options CD9660 #ISO 9660 Filesystem
34options PROCFS #Process filesystem
35options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40options UCONSOLE #Allow users to grab the console
41options USERCONFIG #boot -c editor
42options VISUAL_USERCONFIG #visual boot -c editor
43options KTRACE #ktrace(1) support
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49options ICMP_BANDLIM #Rate limit bad replies
50options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55
56# To make an SMP kernel both SMP and APIC_IO are usually
57# specified. SMP boxes with severely broken BIOSes which
58# boot fine for non-SMP builds *might* work in SMP mode
59# if you define SMP and leave APIC_IO turned off.
60#
61#options SMP # Symmetric MultiProcessor Kernel
62#options APIC_IO # Symmetric (APIC) I/O
63
64# Debugging for Development
65options DDB
66options DDB_TRACE
67options INVARIANTS
68
69# ACPI options
70#options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
71options ACPI_ENABLE_PCI
72
73device isa
74device eisa
75device pci
76
77# Floppy drives
78device fdc0 at isa? port IO_FD1 irq 6 drq 2
79device fd0 at fdc0 drive 0
80device fd1 at fdc0 drive 1
81#
82# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
83# don't use the above line for fdc0 but the following one:
84#device fdc0
85
86# AHCI driver, this will override NATA for AHCI devices,
87# both drivers may be included.
88#
89device ahci
90
91# Sil3124/3132/3531 driver
92#
93device sili
94
95# NEW-ATA (NATA) and ATAPI devices
96#
97device nata
98device natadisk # ATA disk drives
99device natapicd # ATAPI CDROM drives
100device natapifd # ATAPI floppy drives
101device natapist # ATAPI tape drives
102device natapicam # Emulate ATAPI devices as SCSI
103device nataraid # support for ATA software RAID
104 # controllers
105device natausb # ATA-over-USB support
106options ATA_STATIC_ID # Static device numbering
107
108# LEGACY ATA and ATAPI devices
109#device ata0 at isa? port IO_WD1 irq 14
110#device ata1 at isa? port IO_WD2 irq 15
111#device ata
112#device atadisk # ATA disk drives
113#device atapicd # ATAPI CDROM drives
114#device atapifd # ATAPI floppy drives
115#device atapist # ATAPI tape drives
116#device atapicam # Emulate ATAPI devices as SCSI via CAM
117#options ATA_STATIC_ID #Static device numbering
118
119# SCSI Controllers
120device ahb # EISA AHA1742 family
121device ahc # AHA2940 and onboard AIC7xxx devices
122device ahd # AHA39320/29320 and onboard AIC79xx devices
123device amd # AMD 53C974 (Tekram DC-390(T))
124device isp # Qlogic family
125device mpt # LSI-Logic MPT/Fusion
126device ncr # NCR/Symbios Logic
127device sym # NCR/Symbios Logic (newer chipsets)
128options SYM_SETUP_LP_PROBE_MAP=0x40
129 # Allow ncr to attach legacy NCR devices when
130 # both sym and ncr are configured
131
132device adv0 at isa?
133device adw
134device bt0 at isa?
135device aha0 at isa?
136device aic0 at isa?
137
138device ncv # NCR 53C500
139device nsp # Workbit Ninja SCSI-3
140device stg # TMC 18C30/18C50
141
142# SCSI peripherals
143device scbus # SCSI bus (required)
144device da # Direct Access (disks)
145device sa # Sequential Access (tape etc)
146device cd # CD
147device pass # Passthrough device (direct SCSI access)
148device sg # Passthrough device (linux scsi generic)
149
150# RAID controllers interfaced to the SCSI subsystem
151device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
152device dpt # DPT Smartcache - See LINT for options!
153device iir # Intel Integrated RAID
154device mly # Mylex AcceleRAID/eXtremeRAID
155device ciss # Compaq SmartRAID 5* series
156
157# RAID controllers
158device aac # Adaptec FSA RAID, Dell PERC2/PERC3
159#device aacp # SCSI passthrough for aac (requires CAM)
160device ida # Compaq Smart RAID
161device ips # IBM ServeRAID
162device amr # AMI MegaRAID
163device mlx # Mylex DAC960 family
164device twe # 3ware Escalade 7000/8000's
165device twa # 3ware Escalade 9000's
166device pst # Promise Supertrack
167
168# atkbdc0 controls both the keyboard and the PS/2 mouse
169device atkbdc0 at isa? port IO_KBD
170device atkbd0 at atkbdc? irq 1 flags 0x1
171device psm0 at atkbdc? irq 12
172
173device vga0 at isa?
174
175# splash screen/screen saver
176pseudo-device splash
177
178# syscons is the default console driver, resembling an SCO console
179device sc0 at isa? flags 0x100
180options SC_PIXEL_MODE # add support for the raster text mode
181
182device agp # support several AGP chipsets
183
184# Floating point support - do not disable.
185device npx0 at nexus? port IO_NPX irq 13
186
187# Power management support (see LINT for more options)
188device apm0 at nexus? disable flags 0x20 # Advanced Power Management
189
190# HW monitoring devices
191device lm0 at isa? port 0x290
192device it0 at isa? port 0x290
193device it1 at isa? port 0xc00
194device it2 at isa? port 0xd00
195
196# PCCARD (PCMCIA) support
197device pccard
198device cardbus
199device cbb
200
201# Serial (COM) ports
202device sio0 at isa? port IO_COM1 flags 0x10 irq 4
203device sio1 at isa? port IO_COM2 irq 3
204device sio2 at isa? disable port IO_COM3 irq 5
205device sio3 at isa? disable port IO_COM4 irq 9
206
207# Parallel port
208device ppc0 at isa? irq 7
209device ppbus # Parallel port bus (required)
210device lpt # Printer
211device plip # TCP/IP over parallel
212device ppi # Parallel port interface device
213#device vpo # Requires scbus and da
214
215
216# PCI Ethernet NICs.
217device de # DEC/Intel DC21x4x (``Tulip'')
218device txp # 3Com 3cR990 (``Typhoon'')
219device vx # 3Com 3c590, 3c595 (``Vortex'')
220
221device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
222 # Requires ig_hal
223device ig_hal # Intel PRO/1000 hardware abstraction layer
224
225# PCI Ethernet NICs that use the common MII bus controller code.
226# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
227device miibus # MII bus support
228device ae # Attansic/Atheros L2 Fast Ethernet
229device age # Attansic/Atheros L1 Gigabit Ethernet
230device ale # Atheros AR8121/AR8113/AR8114
231device bce # Broadcom NetXtreme II Gigabit Ethernet
232device bfe # Broadcom BCM440x 10/100 Ethernet
233device dc # DEC/Intel 21143 and various workalikes
234device et # Agere ET1310 10/100/1000 Ethernet
235device fxp # Intel EtherExpress PRO/100B (82557, 82558)
236device jme # JMicron Gigabit/Fast Ethernet
237device pcn # AMD Am79C97x PCI 10/100 NICs
238device rl # RealTek 8129/8139
239device re # RealTek 8139C+/8169
240device sf # Adaptec AIC-6915 (``Starfire'')
241device sis # Silicon Integrated Systems SiS 900/SiS 7016
242device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
243device ste # Sundance ST201 (D-Link DFE-550TX)
244device tl # Texas Instruments ThunderLAN
245device tx # SMC EtherPower II (83c170 ``EPIC'')
246device vge # VIA 612x GigE
247device vr # VIA Rhine, Rhine II
248device wb # Winbond W89C840F
249device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
250device bge # Broadcom BCM570x (``Tigon III'')
251device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
252device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
253device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
254
255# ISA Ethernet NICs.
256# 'device ed' requires 'device miibus'
257device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
258device ex
259device ep
260device fe0 at isa? disable port 0x300
261# Xircom Ethernet
262device xe
263
264# Wireless NIC cards
265device wlan # 802.11 support
266device wlan_ccmp # 802.11 CCMP support
267device wlan_tkip # 802.11 TKIP support
268device wlan_wep # 802.11 WEP support
269# 802.11 TX rate control algorithms
270#device wlan_ratectl_amrr # AMRR
271device wlan_ratectl_onoe # Onoe
272device wlan_ratectl_sample # Sample
273
274# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
275# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
276# mode (the factory default). If you set the switches on your ISA
277# card for a manually chosen I/O address and IRQ, you must specify
278# those parameters here.
279device an
280device ral # Ralink Technology 802.11 wireless NIC
281 # Requires wlan_ratectl_onoe and
282 # wlan_ratectl_sample
283device rtw # RealTek 802.11 wireless NIC
284 # Requires wlan_ratectl_onoe and wlan_wep
285# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
286# exists only as a PCMCIA device, so there is no ISA attachment needed
287# and resources will always be dynamically assigned by the pccard code.
288device wi
289
290# The probe order of these is presently determined by i386/isa/isa_compat.c.
291device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
292#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
293device lnc0 at isa? disable port 0x280 irq 10 drq 0
294device cs0 at isa? disable port 0x300
295device sn0 at isa? disable port 0x300 irq 10
296
297# Pseudo devices - the number indicates how many units to allocate.
298pseudo-device loop # Network loopback
299pseudo-device ether # Ethernet support
300pseudo-device sl 1 # Kernel SLIP
301pseudo-device ppp 1 # Kernel PPP
302pseudo-device tun # Packet tunnel.
303pseudo-device pty # Pseudo-ttys (telnet etc)
304pseudo-device md # Memory "disks"
305pseudo-device gif # IPv6 and IPv4 tunneling
306pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
307
308# The `bpf' pseudo-device enables the Berkeley Packet Filter.
309# Be aware of the administrative consequences of enabling this!
310pseudo-device bpf #Berkeley packet filter
311
312pseudo-device crypto # core crypto support, used by wlan
313
314# USB support
315device uhci # UHCI PCI->USB interface
316device ohci # OHCI PCI->USB interface
317device usb # USB Bus (required)
318device ugen # Generic
319device uhid # "Human Interface Devices"
320device ukbd # Keyboard
321device ulpt # Printer
322device umass # Disks/Mass storage - Requires scbus and da
323device ums # Mouse
324device uscanner # Scanners
325device urio # Diamond Rio MP3 Player
326# USB Ethernet, requires mii
327device aue # ADMtek USB ethernet
328device axe # ASIX Electronics USB Ethernet
329device cue # CATC USB ethernet
330device kue # Kawasaki LSI USB ethernet
331device rue # RealTek 8150 based USB ethernet
332# USB wireless NICs, requires wlan, wlan_ratectl_onoe
333device rum # Ralink Technology RT2501USB/RT2601USB
334device ural # Ralink Technology RT2500USB
335
336# FireWire support
337device firewire # FireWire bus code
338device sbp # SCSI over FireWire (Requires scbus and da)
339device fwe # Ethernet over FireWire (non-standard!)