1 /* $OpenBSD: rlphy.c,v 1.23 2006/05/16 02:24:45 brad Exp $ */
4 * Copyright (c) 1997, 1998, 1999
5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
34 * $FreeBSD: src/sys/dev/mii/rlphy.c,v 1.2.2.4 2002/11/08 21:53:49 semenu Exp $
35 * $DragonFly: src/sys/dev/netif/mii_layer/rlphy.c,v 1.12 2006/12/22 23:26:20 swildner Exp $
39 * driver for RealTek 8139 internal PHYs
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/kernel.h>
45 #include <sys/socket.h>
49 #include <net/if_arp.h>
50 #include <net/if_media.h>
56 #include "../rl/if_rlreg.h"
58 #include "miibus_if.h"
60 static int rlphy_probe(device_t);
61 static int rlphy_attach(device_t);
62 static int rlphy_service(struct mii_softc *, struct mii_data *, int);
63 static void rlphy_status(struct mii_softc *);
65 static device_method_t rlphy_methods[] = {
66 /* device interface */
67 DEVMETHOD(device_probe, rlphy_probe),
68 DEVMETHOD(device_attach, rlphy_attach),
69 DEVMETHOD(device_detach, ukphy_detach),
70 DEVMETHOD(device_shutdown, bus_generic_shutdown),
74 static const struct mii_phydesc rlphys[] = {
75 MII_PHYDESC(REALTEK, RTL8201L),
76 MII_PHYDESC(ICPLUS, IP101),
80 static devclass_t rlphy_devclass;
82 static driver_t rlphy_driver = {
85 sizeof(struct mii_softc)
88 DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0);
91 rlphy_probe(device_t dev)
93 struct mii_attach_args *ma = device_get_ivars(dev);
94 const struct mii_phydesc *mpd;
98 * A "real" phy should get preference, but on the 8139 there
99 * is no phyid register.
101 mpd = mii_phy_match(ma, rlphys);
103 device_set_desc(dev, mpd->mpd_name);
108 * RealTek PHY doesn't have vendor/device ID registers:
109 * the rl driver fakes up a return value of all zeros.
111 if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 ||
112 MII_MODEL(ma->mii_id2) != 0)
115 parent = device_get_parent(device_get_parent(dev));
118 * Make sure the parent is an `rl'.
120 if (strcmp(device_get_name(parent), "rl") != 0)
123 device_set_desc(dev, "RealTek internal media interface");
129 rlphy_attach(device_t dev)
131 struct mii_softc *sc;
132 struct mii_attach_args *ma;
133 struct mii_data *mii;
135 sc = device_get_softc(dev);
136 ma = device_get_ivars(dev);
137 mii_softc_init(sc, ma);
138 sc->mii_dev = device_get_parent(dev);
139 mii = device_get_softc(sc->mii_dev);
142 * The RealTek PHY can never be isolated, so never allow non-zero
145 if (mii->mii_instance != 0) {
146 device_printf(dev, "ignoring this PHY, non-zero instance\n");
150 LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
152 sc->mii_inst = mii->mii_instance;
153 sc->mii_service = rlphy_service;
157 sc->mii_flags |= MIIF_NOISOLATE;
159 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
161 #if 0 /* See above. */
162 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
166 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
172 * After PHY is reset, BMCR_AUTOEN will be cleared.
173 * If it is *not* turned on here, mii_pollstat() will
174 * lie about the active media until mii_mediachg() is
175 * called(in rl_init()).
177 PHY_WRITE(sc, MII_BMCR, BMCR_AUTOEN);
179 sc->mii_capabilities =
180 PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
181 device_printf(dev, " ");
182 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
183 kprintf("no media present");
185 mii_phy_add_media(sc);
188 MIIBUS_MEDIAINIT(sc->mii_dev);
193 rlphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
195 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
198 * We can't isolate the RealTek PHY, so it has to be the only one!
200 KASSERT(IFM_INST(ife->ifm_media) == sc->mii_inst,
201 ("rlphy_service: can't isolate RealTek PHY"));
209 * If the interface is not up, don't do anything.
211 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
214 if (IFM_SUBTYPE(ife->ifm_media) == IFM_100_T4) {
216 * XXX Not supported as a manual setting right now.
221 mii_phy_set_media(sc);
226 * Is the interface even up?
228 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
232 * Only used for autonegotiation.
234 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
238 * The RealTek PHY's autonegotiation doesn't need to be
239 * kicked; it continues in the background.
244 /* Update the media status. */
247 /* Callback if something changed. */
248 mii_phy_update(sc, cmd);
253 rlphy_status(struct mii_softc *sc)
255 struct mii_data *mii = sc->mii_pdata;
256 int bmsr, bmcr, anlpar;
258 mii->mii_media_status = IFM_AVALID;
259 mii->mii_media_active = IFM_ETHER;
261 bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
262 if (bmsr & BMSR_LINK)
263 mii->mii_media_status |= IFM_ACTIVE;
265 bmcr = PHY_READ(sc, MII_BMCR);
266 if (bmcr & BMCR_ISO) {
267 mii->mii_media_active |= IFM_NONE;
268 mii->mii_media_status = 0;
272 if (bmcr & BMCR_LOOP)
273 mii->mii_media_active |= IFM_LOOP;
275 if (bmcr & BMCR_AUTOEN) {
279 * NWay autonegotiation takes the highest-order common
280 * bit of the ANAR and ANLPAR (i.e. best media advertised
281 * both by us and our link partner).
283 if ((bmsr & BMSR_ACOMP) == 0) {
284 /* Erg, still trying, I guess... */
285 mii->mii_media_active |= IFM_NONE;
289 if ((anlpar = PHY_READ(sc, MII_ANAR) &
290 PHY_READ(sc, MII_ANLPAR))) {
291 if (anlpar & ANLPAR_T4)
292 mii->mii_media_active |= IFM_100_T4;
293 else if (anlpar & ANLPAR_TX_FD)
294 mii->mii_media_active |= IFM_100_TX|IFM_FDX;
295 else if (anlpar & ANLPAR_TX)
296 mii->mii_media_active |= IFM_100_TX;
297 else if (anlpar & ANLPAR_10_FD)
298 mii->mii_media_active |= IFM_10_T|IFM_FDX;
299 else if (anlpar & ANLPAR_10)
300 mii->mii_media_active |= IFM_10_T;
302 mii->mii_media_active |= IFM_NONE;
306 * If the other side doesn't support NWAY, then the
307 * best we can do is determine if we have a 10Mbps or
308 * 100Mbps link. There's no way to know if the link
309 * is full or half duplex, so we default to half duplex
310 * and hope that the user is clever enough to manually
311 * change the media settings if we're wrong.
315 * The RealTek PHY supports non-NWAY link speed
316 * detection, however it does not report the link
317 * detection results via the ANLPAR or BMSR registers.
318 * (What? RealTek doesn't do things the way everyone
319 * else does? I'm just shocked, shocked I tell you.)
320 * To determine the link speed, we have to do one
323 * - If this is a standalone RealTek RTL8201(L) PHY,
324 * we can determine the link speed by testing bit 0
325 * in the magic, vendor-specific register at offset
328 * - If this is a RealTek MAC with integrated PHY, we
329 * can test the 'SPEED10' bit of the MAC's media status
332 parent = device_get_parent(sc->mii_dev);
333 if (strcmp(device_get_name(parent), "rl") != 0) {
334 if (PHY_READ(sc, 0x0019) & 0x01)
335 mii->mii_media_active |= IFM_100_TX;
337 mii->mii_media_active |= IFM_10_T;
339 if (PHY_READ(sc, RL_MEDIASTAT) &
340 RL_MEDIASTAT_SPEED10)
341 mii->mii_media_active |= IFM_10_T;
343 mii->mii_media_active |= IFM_100_TX;
346 mii->mii_media_active = mii->mii_media.ifm_cur->ifm_media;