2 * Copyright (c) 2007 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * 3. Neither the name of The DragonFly Project nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific, prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * $DragonFly: src/sys/vfs/hammer/hammer_disk.h,v 1.55 2008/11/13 02:18:43 dillon Exp $
37 #ifndef VFS_HAMMER_DISK_H_
38 #define VFS_HAMMER_DISK_H_
40 #include <sys/endian.h>
47 * The structures below represent the on-disk format for a HAMMER
48 * filesystem. Note that all fields for on-disk structures are naturally
49 * aligned. HAMMER uses little endian for fields in on-disk structures.
50 * HAMMER doesn't support big endian arch, but is planned.
52 * Most of HAMMER revolves around the concept of an object identifier. An
53 * obj_id is a 64 bit quantity which uniquely identifies a filesystem object
54 * FOR THE ENTIRE LIFE OF THE FILESYSTEM. This uniqueness allows backups
55 * and mirrors to retain varying amounts of filesystem history by removing
56 * any possibility of conflict through identifier reuse.
58 * A HAMMER filesystem may span multiple volumes.
60 * A HAMMER filesystem uses a 16K filesystem buffer size. All filesystem
61 * I/O is done in multiples of 16K.
63 * 64K X-bufs are used for blocks >= a file's 1MB mark.
65 * Per-volume storage limit: 52 bits 4096 TB
66 * Per-Zone storage limit: 60 bits 1 MTB
67 * Per-filesystem storage limit: 60 bits 1 MTB
69 #define HAMMER_BUFSIZE 16384
70 #define HAMMER_XBUFSIZE 65536
71 #define HAMMER_HBUFSIZE (HAMMER_BUFSIZE / 2)
72 #define HAMMER_XDEMARC (1024 * 1024)
73 #define HAMMER_BUFMASK (HAMMER_BUFSIZE - 1)
74 #define HAMMER_XBUFMASK (HAMMER_XBUFSIZE - 1)
76 #define HAMMER_BUFSIZE64 ((uint64_t)HAMMER_BUFSIZE)
77 #define HAMMER_BUFMASK64 ((uint64_t)HAMMER_BUFMASK)
79 #define HAMMER_XBUFSIZE64 ((uint64_t)HAMMER_XBUFSIZE)
80 #define HAMMER_XBUFMASK64 ((uint64_t)HAMMER_XBUFMASK)
82 #define HAMMER_OFF_ZONE_MASK 0xF000000000000000ULL /* zone portion */
83 #define HAMMER_OFF_VOL_MASK 0x0FF0000000000000ULL /* volume portion */
84 #define HAMMER_OFF_SHORT_MASK 0x000FFFFFFFFFFFFFULL /* offset portion */
85 #define HAMMER_OFF_LONG_MASK 0x0FFFFFFFFFFFFFFFULL /* offset portion */
87 #define HAMMER_OFF_BAD ((hammer_off_t)-1)
89 #define HAMMER_BUFSIZE_DOALIGN(offset) \
90 (((offset) + HAMMER_BUFMASK) & ~HAMMER_BUFMASK)
91 #define HAMMER_BUFSIZE64_DOALIGN(offset) \
92 (((offset) + HAMMER_BUFMASK64) & ~HAMMER_BUFMASK64)
94 #define HAMMER_XBUFSIZE_DOALIGN(offset) \
95 (((offset) + HAMMER_XBUFMASK) & ~HAMMER_XBUFMASK)
96 #define HAMMER_XBUFSIZE64_DOALIGN(offset) \
97 (((offset) + HAMMER_XBUFMASK64) & ~HAMMER_XBUFMASK64)
100 * The current limit of volumes that can make up a HAMMER FS
102 #define HAMMER_MAX_VOLUMES 256
105 * Reserved space for (future) header junk after the volume header.
107 #define HAMMER_MIN_VOL_JUNK (HAMMER_BUFSIZE * 16) /* 256 KB */
108 #define HAMMER_MAX_VOL_JUNK HAMMER_MIN_VOL_JUNK
109 #define HAMMER_VOL_JUNK_SIZE HAMMER_MIN_VOL_JUNK
112 * Hammer transaction ids are 64 bit unsigned integers and are usually
113 * synchronized with the time of day in nanoseconds.
115 * Hammer offsets are used for FIFO indexing and embed a cycle counter
116 * and volume number in addition to the offset. Most offsets are required
117 * to be 16 KB aligned.
119 typedef uint64_t hammer_tid_t;
120 typedef uint64_t hammer_off_t;
121 typedef uint32_t hammer_crc_t;
123 #define HAMMER_MIN_TID 0ULL /* unsigned */
124 #define HAMMER_MAX_TID 0xFFFFFFFFFFFFFFFFULL /* unsigned */
125 #define HAMMER_MIN_KEY -0x8000000000000000LL /* signed */
126 #define HAMMER_MAX_KEY 0x7FFFFFFFFFFFFFFFLL /* signed */
127 #define HAMMER_MIN_OBJID HAMMER_MIN_KEY /* signed */
128 #define HAMMER_MAX_OBJID HAMMER_MAX_KEY /* signed */
129 #define HAMMER_MIN_RECTYPE 0x0U /* unsigned */
130 #define HAMMER_MAX_RECTYPE 0xFFFFU /* unsigned */
131 #define HAMMER_MIN_OFFSET 0ULL /* unsigned */
132 #define HAMMER_MAX_OFFSET 0xFFFFFFFFFFFFFFFFULL /* unsigned */
135 * hammer_off_t has several different encodings. Note that not all zones
136 * encode a vol_no. Zone bits are not a part of filesystem capacity as
137 * the zone bits aren't directly or indirectly mapped to physical volumes.
139 * In other words, HAMMER's logical filesystem offset consists of 64 bits,
140 * but the filesystem is considered 60 bits filesystem, not 64 bits.
141 * The maximum filesystem capacity is 1EB, not 16EB.
143 * zone 0: available, a big-block that contains the offset is unused
144 * zone 1 (z,v,o): raw volume relative (offset 0 is the volume header)
145 * zone 2 (z,v,o): raw buffer relative (offset 0 is the first buffer)
146 * zone 3 (z,o): undo/redo fifo - fixed zone-2 offset array in volume header
147 * zone 4 (z,v,o): freemap - only real blockmap
148 * zone 8 (z,v,o): B-Tree - actually zone-2 address
149 * zone 9 (z,v,o): meta - actually zone-2 address
150 * zone 10 (z,v,o): large-data - actually zone-2 address
151 * zone 11 (z,v,o): small-data - actually zone-2 address
152 * zone 15: unavailable, usually the offset is beyond volume size
154 * layer1/layer2 direct map:
155 * Maximum HAMMER filesystem capacity from volume aspect
156 * 2^8(max volumes) * 2^52(max volume size) = 2^60 = 1EB (long offset)
157 * <------------------------------------------------------------->
158 * 8bits 52bits (short offset)
159 * <------><----------------------------------------------------->
160 * zzzzvvvvvvvvoooo oooooooooooooooo oooooooooooooooo oooooooooooooooo
161 * ----111111111111 1111112222222222 222222222ooooooo oooooooooooooooo
162 * <-----------------><------------------><---------------------->
163 * 18bits 19bits 23bits
164 * <------------------------------------------------------------->
165 * 2^18(layer1) * 2^19(layer2) * 2^23(big-block) = 2^60 = 1EB
166 * Maximum HAMMER filesystem capacity from blockmap aspect
169 * +-------------------------> offset 0 of a device/partition
170 * | volume header (1928 bytes)
171 * | the rest of header junk space (HAMMER_BUFSIZE aligned)
172 * +-------------------------> vol_bot_beg
173 * | boot area (HAMMER_BUFSIZE aligned)
174 * +-------------------------> vol_mem_beg
175 * | memory log (HAMMER_BUFSIZE aligned)
176 * +-------------------------> vol_buf_beg (physical offset of zone-2)
177 * | zone-4 big-block for layer1
178 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE
179 * | zone-4 big-blocks for layer2
180 * | ... (1 big-block per 4TB space)
181 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ...
182 * | zone-3 big-blocks for UNDO/REDO FIFO
183 * | ... (max 128 big-blocks)
184 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ...
185 * | zone-8 big-block for root B-Tree node/etc
186 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ...
187 * | zone-9 big-block for root inode/PFS#0/etc
188 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ...
189 * | zone-X big-blocks
190 * | ... (big-blocks for new zones after newfs_hammer)
195 * +-------------------------> vol_buf_end (HAMMER_BUFSIZE aligned)
196 * +-------------------------> end of a device/partition
198 * volume#N layout (0<N<256)
199 * +-------------------------> offset 0 of a device/partition
200 * | volume header (1928 bytes)
201 * | the rest of header junk space (HAMMER_BUFSIZE aligned)
202 * +-------------------------> vol_bot_beg
203 * | boot area (HAMMER_BUFSIZE aligned)
204 * +-------------------------> vol_mem_beg
205 * | memory log (HAMMER_BUFSIZE aligned)
206 * +-------------------------> vol_buf_beg (physical offset of zone-2)
207 * | zone-4 big-blocks for layer2
208 * | ... (1 big-block per 4TB space)
209 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ...
210 * | zone-X big-blocks
211 * | ... (unused until volume#(N-1) runs out of space)
216 * +-------------------------> vol_buf_end (HAMMER_BUFSIZE aligned)
217 * +-------------------------> end of a device/partition
220 #define HAMMER_ZONE_RAW_VOLUME 0x1000000000000000ULL
221 #define HAMMER_ZONE_RAW_BUFFER 0x2000000000000000ULL
222 #define HAMMER_ZONE_UNDO 0x3000000000000000ULL
223 #define HAMMER_ZONE_FREEMAP 0x4000000000000000ULL
224 #define HAMMER_ZONE_RESERVED05 0x5000000000000000ULL /* not used */
225 #define HAMMER_ZONE_RESERVED06 0x6000000000000000ULL /* not used */
226 #define HAMMER_ZONE_RESERVED07 0x7000000000000000ULL /* not used */
227 #define HAMMER_ZONE_BTREE 0x8000000000000000ULL
228 #define HAMMER_ZONE_META 0x9000000000000000ULL
229 #define HAMMER_ZONE_LARGE_DATA 0xA000000000000000ULL
230 #define HAMMER_ZONE_SMALL_DATA 0xB000000000000000ULL
231 #define HAMMER_ZONE_RESERVED0C 0xC000000000000000ULL /* not used */
232 #define HAMMER_ZONE_RESERVED0D 0xD000000000000000ULL /* not used */
233 #define HAMMER_ZONE_RESERVED0E 0xE000000000000000ULL /* not used */
234 #define HAMMER_ZONE_UNAVAIL 0xF000000000000000ULL
236 #define HAMMER_ZONE_RAW_VOLUME_INDEX 1
237 #define HAMMER_ZONE_RAW_BUFFER_INDEX 2
238 #define HAMMER_ZONE_UNDO_INDEX 3
239 #define HAMMER_ZONE_FREEMAP_INDEX 4
240 #define HAMMER_ZONE_BTREE_INDEX 8
241 #define HAMMER_ZONE_META_INDEX 9
242 #define HAMMER_ZONE_LARGE_DATA_INDEX 10
243 #define HAMMER_ZONE_SMALL_DATA_INDEX 11
244 #define HAMMER_ZONE_UNAVAIL_INDEX 15
246 #define HAMMER_MAX_ZONES 16
248 #define HAMMER_ZONE(offset) ((offset) & HAMMER_OFF_ZONE_MASK)
250 #define hammer_is_zone_raw_volume(offset) \
251 (HAMMER_ZONE(offset) == HAMMER_ZONE_RAW_VOLUME)
252 #define hammer_is_zone_raw_buffer(offset) \
253 (HAMMER_ZONE(offset) == HAMMER_ZONE_RAW_BUFFER)
254 #define hammer_is_zone_undo(offset) \
255 (HAMMER_ZONE(offset) == HAMMER_ZONE_UNDO)
256 #define hammer_is_zone_freemap(offset) \
257 (HAMMER_ZONE(offset) == HAMMER_ZONE_FREEMAP)
258 #define hammer_is_zone_btree(offset) \
259 (HAMMER_ZONE(offset) == HAMMER_ZONE_BTREE)
260 #define hammer_is_zone_meta(offset) \
261 (HAMMER_ZONE(offset) == HAMMER_ZONE_META)
262 #define hammer_is_zone_large_data(offset) \
263 (HAMMER_ZONE(offset) == HAMMER_ZONE_LARGE_DATA)
264 #define hammer_is_zone_small_data(offset) \
265 (HAMMER_ZONE(offset) == HAMMER_ZONE_SMALL_DATA)
266 #define hammer_is_zone_unavail(offset) \
267 (HAMMER_ZONE(offset) == HAMMER_ZONE_UNAVAIL)
268 #define hammer_is_zone_data(offset) \
269 (hammer_is_zone_large_data(offset) || hammer_is_zone_small_data(offset))
272 * Test if the zone is directly mapped to zone-2 offset via freemap.
274 #define hammer_is_zone2_mapped_index(zone) \
275 ((zone) >= HAMMER_ZONE_BTREE_INDEX && \
276 (zone) < HAMMER_MAX_ZONES)
278 * Test if the zone is directly mapped to zone-2 offset. The word
279 * directly here means the zone is neither RAW_VOLUME nor UNDO zone.
281 #define hammer_is_direct_mapped_index(zone) \
282 (((zone) == HAMMER_ZONE_RAW_BUFFER_INDEX) || \
283 ((zone) == HAMMER_ZONE_FREEMAP_INDEX) || \
284 hammer_is_zone2_mapped_index(zone))
286 #define HAMMER_ZONE_ENCODE(zone, ham_off) \
287 (((hammer_off_t)(zone) << 60) | (ham_off))
288 #define HAMMER_ZONE_DECODE(ham_off) \
289 ((int)(((hammer_off_t)(ham_off) >> 60)))
291 #define HAMMER_VOL_ENCODE(vol_no) \
292 ((hammer_off_t)((vol_no) & 255) << 52)
293 #define HAMMER_VOL_DECODE(ham_off) \
294 ((int)(((hammer_off_t)(ham_off) >> 52) & 255))
296 #define HAMMER_OFF_SHORT_ENCODE(offset) \
297 ((hammer_off_t)(offset) & HAMMER_OFF_SHORT_MASK)
298 #define HAMMER_OFF_LONG_ENCODE(offset) \
299 ((hammer_off_t)(offset) & HAMMER_OFF_LONG_MASK)
301 #define HAMMER_ENCODE(zone, vol_no, offset) \
302 (((hammer_off_t)(zone) << 60) | \
303 HAMMER_VOL_ENCODE(vol_no) | \
304 HAMMER_OFF_SHORT_ENCODE(offset))
305 #define HAMMER_ENCODE_RAW_VOLUME(vol_no, offset) \
306 HAMMER_ENCODE(HAMMER_ZONE_RAW_VOLUME_INDEX, vol_no, offset)
307 #define HAMMER_ENCODE_RAW_BUFFER(vol_no, offset) \
308 HAMMER_ENCODE(HAMMER_ZONE_RAW_BUFFER_INDEX, vol_no, offset)
309 #define HAMMER_ENCODE_UNDO(offset) \
310 HAMMER_ENCODE(HAMMER_ZONE_UNDO_INDEX, HAMMER_ROOT_VOLNO, offset)
311 #define HAMMER_ENCODE_FREEMAP(vol_no, offset) \
312 HAMMER_ENCODE(HAMMER_ZONE_FREEMAP_INDEX, vol_no, offset)
315 * Translate a zone address to zone-X address.
317 #define hammer_xlate_to_zoneX(zone, offset) \
318 HAMMER_ZONE_ENCODE((zone), (offset) & ~HAMMER_OFF_ZONE_MASK)
319 #define hammer_xlate_to_zone2(offset) \
320 hammer_xlate_to_zoneX(HAMMER_ZONE_RAW_BUFFER_INDEX, (offset))
322 #define hammer_data_zone(data_len) \
323 (((data_len) >= HAMMER_BUFSIZE) ? \
324 HAMMER_ZONE_LARGE_DATA : \
325 HAMMER_ZONE_SMALL_DATA)
326 #define hammer_data_zone_index(data_len) \
327 (((data_len) >= HAMMER_BUFSIZE) ? \
328 HAMMER_ZONE_LARGE_DATA_INDEX : \
329 HAMMER_ZONE_SMALL_DATA_INDEX)
332 * Big-Block backing store
334 * A blockmap is a two-level map which translates a blockmap-backed zone
335 * offset into a raw zone 2 offset. The layer 1 handles 18 bits and the
336 * layer 2 handles 19 bits. The 8M big-block size is 23 bits so two
337 * layers gives us 18+19+23 = 60 bits of address space.
339 * When using hinting for a blockmap lookup, the hint is lost when the
340 * scan leaves the HINTBLOCK, which is typically several BIGBLOCK's.
341 * HINTBLOCK is a heuristic.
343 #define HAMMER_HINTBLOCK_SIZE (HAMMER_BIGBLOCK_SIZE * 4)
344 #define HAMMER_HINTBLOCK_MASK64 ((uint64_t)HAMMER_HINTBLOCK_SIZE - 1)
345 #define HAMMER_BIGBLOCK_SIZE (8192 * 1024)
346 #define HAMMER_BIGBLOCK_SIZE64 ((uint64_t)HAMMER_BIGBLOCK_SIZE)
347 #define HAMMER_BIGBLOCK_MASK (HAMMER_BIGBLOCK_SIZE - 1)
348 #define HAMMER_BIGBLOCK_MASK64 ((uint64_t)HAMMER_BIGBLOCK_SIZE - 1)
349 #define HAMMER_BIGBLOCK_BITS 23
351 #define HAMMER_BIGBLOCK_OVERFILL (6144 * 1024)
353 #if (1 << HAMMER_BIGBLOCK_BITS) != HAMMER_BIGBLOCK_SIZE
354 #error "HAMMER_BIGBLOCK_BITS BROKEN"
357 #define HAMMER_BUFFERS_PER_BIGBLOCK \
358 (HAMMER_BIGBLOCK_SIZE / HAMMER_BUFSIZE)
359 #define HAMMER_BUFFERS_PER_BIGBLOCK_MASK \
360 (HAMMER_BUFFERS_PER_BIGBLOCK - 1)
361 #define HAMMER_BUFFERS_PER_BIGBLOCK_MASK64 \
362 ((hammer_off_t)HAMMER_BUFFERS_PER_BIGBLOCK_MASK)
364 #define HAMMER_BIGBLOCK_DOALIGN(offset) \
365 (((offset) + HAMMER_BIGBLOCK_MASK64) & ~HAMMER_BIGBLOCK_MASK64)
368 * Maximum number of mirrors operating in master mode (multi-master
369 * clustering and mirroring). Note that HAMMER1 does not support
370 * multi-master clustering as of 2015.
372 #define HAMMER_MAX_MASTERS 16
375 * The blockmap is somewhat of a degenerate structure. HAMMER only actually
376 * uses it in its original incarnation to implement the freemap.
378 * zone:1 raw volume (no blockmap)
379 * zone:2 raw buffer (no blockmap)
380 * zone:3 undomap (direct layer2 array in volume header)
381 * zone:4 freemap (the only real blockmap)
382 * zone:8-15 zone id used to classify big-block only, address is actually
385 typedef struct hammer_blockmap {
386 hammer_off_t phys_offset; /* zone-2 offset only used by zone-4 */
387 hammer_off_t first_offset; /* zone-X offset only used by zone-3 */
388 hammer_off_t next_offset; /* zone-X offset for allocation */
389 hammer_off_t alloc_offset; /* zone-X offset only used by zone-3 */
391 hammer_crc_t entry_crc;
392 } *hammer_blockmap_t;
394 #define HAMMER_BLOCKMAP_CRCSIZE \
395 offsetof(struct hammer_blockmap, entry_crc)
398 * The blockmap is a 2-layer entity made up of big-blocks. The first layer
399 * contains 262144 32-byte entries (18 bits), the second layer contains
400 * 524288 16-byte entries (19 bits), representing 8MB (23 bit) blockmaps.
401 * 18+19+23 = 60 bits. The top four bits are the zone id.
403 * Currently only the freemap utilizes both layers in all their glory.
404 * All primary data/meta-data zones actually encode a zone-2 address
405 * requiring no real blockmap translation.
407 * The freemap uses the upper 8 bits of layer-1 to identify the volume,
408 * thus any space allocated via the freemap can be directly translated
409 * to a zone:2 (or zone:8-15) address.
411 * zone-X blockmap offset: [zone:4][layer1:18][layer2:19][big-block:23]
415 * 32 bytes layer1 entry for 8MB big-block.
416 * A big-block can hold 2^23 / 2^5 = 2^18 layer1 entries,
417 * which equals bits assigned for layer1 in zone-2 address.
419 typedef struct hammer_blockmap_layer1 {
420 hammer_off_t blocks_free; /* big-blocks free */
421 hammer_off_t phys_offset; /* UNAVAIL or zone-2 */
422 hammer_off_t reserved01;
423 hammer_crc_t layer2_crc; /* xor'd crc's of HAMMER_BLOCKSIZE */
425 hammer_crc_t layer1_crc; /* MUST BE LAST FIELD OF STRUCTURE*/
426 } *hammer_blockmap_layer1_t;
428 #define HAMMER_LAYER1_CRCSIZE \
429 offsetof(struct hammer_blockmap_layer1, layer1_crc)
432 * 16 bytes layer2 entry for 8MB big-blocks.
433 * A big-block can hold 2^23 / 2^4 = 2^19 layer2 entries,
434 * which equals bits assigned for layer2 in zone-2 address.
436 * NOTE: bytes_free is signed and can legally go negative if/when data
437 * de-dup occurs. This field will never go higher than
438 * HAMMER_BIGBLOCK_SIZE. If exactly HAMMER_BIGBLOCK_SIZE
439 * the big-block is completely free.
441 typedef struct hammer_blockmap_layer2 {
442 uint8_t zone; /* typed allocation zone */
445 uint32_t append_off; /* allocatable space index */
446 int32_t bytes_free; /* bytes free within this big-block */
447 hammer_crc_t entry_crc;
448 } *hammer_blockmap_layer2_t;
450 #define HAMMER_LAYER2_CRCSIZE \
451 offsetof(struct hammer_blockmap_layer2, entry_crc)
453 #define HAMMER_BLOCKMAP_UNAVAIL ((hammer_off_t)-1LL)
455 #define HAMMER_BLOCKMAP_RADIX1 /* 2^18 = 262144 */ \
456 ((int)(HAMMER_BIGBLOCK_SIZE / sizeof(struct hammer_blockmap_layer1)))
457 #define HAMMER_BLOCKMAP_RADIX2 /* 2^19 = 524288 */ \
458 ((int)(HAMMER_BIGBLOCK_SIZE / sizeof(struct hammer_blockmap_layer2)))
460 #define HAMMER_BLOCKMAP_LAYER1 /* 2^(18+19+23) = 1EB */ \
461 (HAMMER_BLOCKMAP_RADIX1 * HAMMER_BLOCKMAP_LAYER2)
462 #define HAMMER_BLOCKMAP_LAYER2 /* 2^(19+23) = 4TB */ \
463 (HAMMER_BLOCKMAP_RADIX2 * HAMMER_BIGBLOCK_SIZE64)
465 #define HAMMER_BLOCKMAP_LAYER1_MASK (HAMMER_BLOCKMAP_LAYER1 - 1)
466 #define HAMMER_BLOCKMAP_LAYER2_MASK (HAMMER_BLOCKMAP_LAYER2 - 1)
468 #define HAMMER_BLOCKMAP_LAYER2_DOALIGN(offset) \
469 (((offset) + HAMMER_BLOCKMAP_LAYER2_MASK) & \
470 ~HAMMER_BLOCKMAP_LAYER2_MASK)
473 * Index within layer1 or layer2 big-block for the entry representing
474 * a zone-2 physical offset.
476 #define HAMMER_BLOCKMAP_LAYER1_INDEX(zone2_offset) \
477 ((int)(((zone2_offset) & HAMMER_BLOCKMAP_LAYER1_MASK) / \
478 HAMMER_BLOCKMAP_LAYER2))
480 #define HAMMER_BLOCKMAP_LAYER2_INDEX(zone2_offset) \
481 ((int)(((zone2_offset) & HAMMER_BLOCKMAP_LAYER2_MASK) / \
482 HAMMER_BIGBLOCK_SIZE64))
485 * Byte offset within layer1 or layer2 big-block for the entry representing
486 * a zone-2 physical offset. Multiply the index by sizeof(blockmap_layer).
488 #define HAMMER_BLOCKMAP_LAYER1_OFFSET(zone2_offset) \
489 (HAMMER_BLOCKMAP_LAYER1_INDEX(zone2_offset) * \
490 sizeof(struct hammer_blockmap_layer1))
492 #define HAMMER_BLOCKMAP_LAYER2_OFFSET(zone2_offset) \
493 (HAMMER_BLOCKMAP_LAYER2_INDEX(zone2_offset) * \
494 sizeof(struct hammer_blockmap_layer2))
497 * Move on to offset 0 of the next layer1 or layer2.
499 #define HAMMER_ZONE_LAYER1_NEXT_OFFSET(offset) \
500 (((offset) + HAMMER_BLOCKMAP_LAYER2) & ~HAMMER_BLOCKMAP_LAYER2_MASK)
502 #define HAMMER_ZONE_LAYER2_NEXT_OFFSET(offset) \
503 (((offset) + HAMMER_BIGBLOCK_SIZE) & ~HAMMER_BIGBLOCK_MASK64)
506 * HAMMER UNDO parameters. The UNDO fifo is mapped directly in the volume
507 * header with an array of zone-2 offsets. A maximum of (128x8MB) = 1GB,
508 * and minimum of (64x8MB) = 512MB may be reserved. The size of the undo
509 * fifo is usually set a newfs time.
511 #define HAMMER_MIN_UNDO_BIGBLOCKS 64
512 #define HAMMER_MAX_UNDO_BIGBLOCKS 128
515 * All on-disk HAMMER structures which make up elements of the UNDO FIFO
516 * contain a hammer_fifo_head and hammer_fifo_tail structure. This structure
517 * contains all the information required to validate the fifo element
518 * and to scan the fifo in either direction. The head is typically embedded
519 * in higher level hammer on-disk structures while the tail is typically
520 * out-of-band. hdr_size is the size of the whole mess, including the tail.
522 * All undo structures are guaranteed to not cross a 16K filesystem
523 * buffer boundary. Most undo structures are fairly small. Data spaces
524 * are not immediately reused by HAMMER so file data is not usually recorded
525 * as part of an UNDO.
527 * PAD elements are allowed to take up only 8 bytes of space as a special
528 * case, containing only hdr_signature, hdr_type, and hdr_size fields,
529 * and with the tail overloaded onto the head structure for 8 bytes total.
531 * Every undo record has a sequence number. This number is unrelated to
532 * transaction ids and instead collects the undo transactions associated
533 * with a single atomic operation. A larger transactional operation, such
534 * as a remove(), may consist of several smaller atomic operations
535 * representing raw meta-data operations.
537 * HAMMER VERSION 4 CHANGES
539 * In HAMMER version 4 the undo structure alignment is reduced from 16384
540 * to 512 bytes in order to ensure that each 512 byte sector begins with
541 * a header. The hdr_seq field in the header is a 32 bit sequence number
542 * which allows the recovery code to detect missing sectors
543 * without relying on the 32-bit crc and to definitively identify the current
544 * undo sequence space without having to rely on information from the volume
545 * header. In addition, new REDO entries in the undo space are used to
546 * record write, write/extend, and transaction id updates.
548 * The grand result is:
550 * (1) The volume header no longer needs to be synchronized for most
551 * flush and fsync operations.
553 * (2) Most fsync operations need only lay down REDO records
555 * (3) Data overwrite for nohistory operations covered by REDO records
556 * can be supported (instead of rolling a new block allocation),
557 * by rolling UNDO for the prior contents of the data.
559 * HAMMER VERSION 5 CHANGES
561 * Hammer version 5 contains a minor adjustment making layer2's bytes_free
562 * field signed, allowing dedup to push it into the negative domain.
564 #define HAMMER_HEAD_ALIGN 8
565 #define HAMMER_HEAD_ALIGN_MASK (HAMMER_HEAD_ALIGN - 1)
566 #define HAMMER_HEAD_DOALIGN(bytes) \
567 (((bytes) + HAMMER_HEAD_ALIGN_MASK) & ~HAMMER_HEAD_ALIGN_MASK)
569 #define HAMMER_UNDO_ALIGN 512
570 #define HAMMER_UNDO_ALIGN64 ((uint64_t)512)
571 #define HAMMER_UNDO_MASK (HAMMER_UNDO_ALIGN - 1)
572 #define HAMMER_UNDO_MASK64 (HAMMER_UNDO_ALIGN64 - 1)
573 #define HAMMER_UNDO_DOALIGN(offset) \
574 (((offset) + HAMMER_UNDO_MASK) & ~HAMMER_UNDO_MASK64)
576 typedef struct hammer_fifo_head {
577 uint16_t hdr_signature;
579 uint32_t hdr_size; /* Aligned size of the whole mess */
580 uint32_t hdr_seq; /* Sequence number */
581 hammer_crc_t hdr_crc; /* XOR crc up to field w/ crc after field */
582 } *hammer_fifo_head_t;
584 #define HAMMER_FIFO_HEAD_CRCOFF offsetof(struct hammer_fifo_head, hdr_crc)
586 typedef struct hammer_fifo_tail {
587 uint16_t tail_signature;
589 uint32_t tail_size; /* aligned size of the whole mess */
590 } *hammer_fifo_tail_t;
595 * NOTE: 0x8000U part of HAMMER_HEAD_TYPE_PAD can be removed if the HAMMER
596 * version ever gets bumped again. It exists only to keep compatibility with
599 #define HAMMER_HEAD_TYPE_PAD (0x0040U | 0x8000U)
600 #define HAMMER_HEAD_TYPE_DUMMY 0x0041U /* dummy entry w/seqno */
601 #define HAMMER_HEAD_TYPE_UNDO 0x0043U /* random UNDO information */
602 #define HAMMER_HEAD_TYPE_REDO 0x0044U /* data REDO / fast fsync */
604 #define HAMMER_HEAD_SIGNATURE 0xC84EU
605 #define HAMMER_TAIL_SIGNATURE 0xC74FU
608 * Misc FIFO structures.
610 * UNDO - Raw meta-data media updates.
612 typedef struct hammer_fifo_undo {
613 struct hammer_fifo_head head;
614 hammer_off_t undo_offset; /* zone-1,2 offset */
615 int32_t undo_data_bytes;
616 int32_t undo_reserved01;
617 /* followed by data */
618 } *hammer_fifo_undo_t;
621 * REDO (HAMMER version 4+) - Logical file writes/truncates.
623 * REDOs contain information which will be duplicated in a later meta-data
624 * update, allowing fast write()+fsync() operations. REDOs can be ignored
625 * without harming filesystem integrity but must be processed if fsync()
626 * semantics are desired.
628 * Unlike UNDOs which are processed backwards within the recovery span,
629 * REDOs must be processed forwards starting further back (starting outside
630 * the recovery span).
632 * WRITE - Write logical file (with payload). Executed both
633 * out-of-span and in-span. Out-of-span WRITEs may be
634 * filtered out by TERMs.
636 * TRUNC - Truncate logical file (no payload). Executed both
637 * out-of-span and in-span. Out-of-span WRITEs may be
638 * filtered out by TERMs.
640 * TERM_* - Indicates meta-data was committed (if out-of-span) or
641 * will be rolled-back (in-span). Any out-of-span TERMs
642 * matching earlier WRITEs remove those WRITEs from
643 * consideration as they might conflict with a later data
644 * commit (which is not being rolled-back).
646 * SYNC - The earliest in-span SYNC (the last one when scanning
647 * backwards) tells the recovery code how far out-of-span
648 * it must go to run REDOs.
650 * NOTE: WRITEs do not always have matching TERMs even under
651 * perfect conditions because truncations might remove the
652 * buffers from consideration. I/O problems can also remove
653 * buffers from consideration.
655 * TRUNCSs do not always have matching TERMs because several
656 * truncations may be aggregated together into a single TERM.
658 typedef struct hammer_fifo_redo {
659 struct hammer_fifo_head head;
660 int64_t redo_objid; /* file being written */
661 hammer_off_t redo_offset; /* logical offset in file */
662 int32_t redo_data_bytes;
664 uint32_t redo_localization;
665 uint32_t redo_reserved01;
666 uint64_t redo_reserved02;
667 /* followed by data */
668 } *hammer_fifo_redo_t;
670 #define HAMMER_REDO_WRITE 0x00000001
671 #define HAMMER_REDO_TRUNC 0x00000002
672 #define HAMMER_REDO_TERM_WRITE 0x00000004
673 #define HAMMER_REDO_TERM_TRUNC 0x00000008
674 #define HAMMER_REDO_SYNC 0x00000010
676 typedef union hammer_fifo_any {
677 struct hammer_fifo_head head;
678 struct hammer_fifo_undo undo;
679 struct hammer_fifo_redo redo;
680 } *hammer_fifo_any_t;
683 * Volume header types
685 #define HAMMER_FSBUF_VOLUME 0xC8414D4DC5523031ULL /* HAMMER01 */
686 #define HAMMER_FSBUF_VOLUME_REV 0x313052C54D4D41C8ULL /* (reverse endian) */
689 * HAMMER Volume header
691 * A HAMMER filesystem can be built from 1-256 block devices, each block
692 * device contains a volume header followed by however many buffers fit
695 * One of the volumes making up a HAMMER filesystem is the root volume.
696 * The root volume is always volume #0 which is the first block device path
697 * specified by newfs_hammer(8). All HAMMER volumes have a volume header,
698 * however the root volume may be the only volume that has valid values for
699 * some fields in the header.
701 * Special field notes:
703 * vol_bot_beg - offset of boot area (mem_beg - bot_beg bytes)
704 * vol_mem_beg - offset of memory log (buf_beg - mem_beg bytes)
705 * vol_buf_beg - offset of the first buffer in volume
706 * vol_buf_end - offset of volume EOF (on buffer boundary)
708 * The memory log area allows a kernel to cache new records and data
709 * in memory without allocating space in the actual filesystem to hold
710 * the records and data. In the event that a filesystem becomes full,
711 * any records remaining in memory can be flushed to the memory log
712 * area. This allows the kernel to immediately return success.
714 * The buffer offset is a physical offset of zone-2 offset. The lower
715 * 52 bits of the zone-2 offset is added to the buffer offset of each
716 * volume to generate an actual I/O offset within the block device.
718 * NOTE: boot area and memory log are currently not used.
722 * Filesystem type string
724 #define HAMMER_FSTYPE_STRING "DragonFly HAMMER"
727 * These macros are only used by userspace when userspace commands either
728 * initialize or add a new HAMMER volume.
730 #define HAMMER_BOOT_MINBYTES (32*1024)
731 #define HAMMER_BOOT_NOMBYTES (64LL*1024*1024)
732 #define HAMMER_BOOT_MAXBYTES (256LL*1024*1024)
734 #define HAMMER_MEM_MINBYTES (256*1024)
735 #define HAMMER_MEM_NOMBYTES (1LL*1024*1024*1024)
736 #define HAMMER_MEM_MAXBYTES (64LL*1024*1024*1024)
738 typedef struct hammer_volume_ondisk {
739 uint64_t vol_signature; /* HAMMER_FSBUF_VOLUME for a valid header */
742 * These are relative to block device offset, not zone offsets.
744 int64_t vol_bot_beg; /* offset of boot area */
745 int64_t vol_mem_beg; /* offset of memory log */
746 int64_t vol_buf_beg; /* offset of the first buffer in volume */
747 int64_t vol_buf_end; /* offset of volume EOF (on buffer boundary) */
748 int64_t vol_reserved01;
750 uuid_t vol_fsid; /* identify filesystem */
751 uuid_t vol_fstype; /* identify filesystem type */
752 char vol_label[64]; /* filesystem label */
754 int32_t vol_no; /* volume number within filesystem */
755 int32_t vol_count; /* number of volumes making up filesystem */
757 uint32_t vol_version; /* version control information */
758 hammer_crc_t vol_crc; /* header crc */
759 uint32_t vol_flags; /* volume flags */
760 uint32_t vol_rootvol; /* the root volume number (must be 0) */
762 uint32_t vol_reserved[8];
765 * These fields are initialized and space is reserved in every
766 * volume making up a HAMMER filesytem, but only the root volume
767 * contains valid data. Note that vol0_stat_bigblocks does not
768 * include big-blocks for freemap and undomap initially allocated
769 * by newfs_hammer(8).
771 int64_t vol0_stat_bigblocks; /* total big-blocks when fs is empty */
772 int64_t vol0_stat_freebigblocks;/* number of free big-blocks */
773 int64_t vol0_reserved01;
774 int64_t vol0_stat_inodes; /* for statfs only */
775 int64_t vol0_reserved02;
776 hammer_off_t vol0_btree_root; /* B-Tree root offset in zone-8 */
777 hammer_tid_t vol0_next_tid; /* highest partially synchronized TID */
778 hammer_off_t vol0_reserved03;
781 * Blockmaps for zones. Not all zones use a blockmap. Note that
782 * the entire root blockmap is cached in the hammer_mount structure.
784 struct hammer_blockmap vol0_blockmap[HAMMER_MAX_ZONES];
787 * Array of zone-2 addresses for undo FIFO.
789 hammer_off_t vol0_undo_array[HAMMER_MAX_UNDO_BIGBLOCKS];
790 } *hammer_volume_ondisk_t;
792 #define HAMMER_ROOT_VOLNO 0
794 #define HAMMER_VOLF_NEEDFLUSH 0x0004 /* volume needs flush */
796 #define HAMMER_VOL_CRCSIZE1 \
797 offsetof(struct hammer_volume_ondisk, vol_crc)
798 #define HAMMER_VOL_CRCSIZE2 \
799 (sizeof(struct hammer_volume_ondisk) - HAMMER_VOL_CRCSIZE1 - \
800 sizeof(hammer_crc_t))
802 #define HAMMER_VOL_VERSION_MIN 1 /* minimum supported version */
803 #define HAMMER_VOL_VERSION_DEFAULT 6 /* newfs default version */
804 #define HAMMER_VOL_VERSION_WIP 7 /* version >= this is WIP */
805 #define HAMMER_VOL_VERSION_MAX 6 /* maximum supported version */
807 #define HAMMER_VOL_VERSION_ONE 1
808 #define HAMMER_VOL_VERSION_TWO 2 /* new dirent layout (2.3+) */
809 #define HAMMER_VOL_VERSION_THREE 3 /* new snapshot layout (2.5+) */
810 #define HAMMER_VOL_VERSION_FOUR 4 /* new undo/flush (2.5+) */
811 #define HAMMER_VOL_VERSION_FIVE 5 /* dedup (2.9+) */
812 #define HAMMER_VOL_VERSION_SIX 6 /* DIRHASH_ALG1 */
815 * Translate a zone-2 address to physical address
817 #define hammer_xlate_to_phys(volume, zone2_offset) \
818 ((volume)->vol_buf_beg + HAMMER_OFF_SHORT_ENCODE(zone2_offset))
821 * Translate a zone-3 address to zone-2 address
823 #define HAMMER_UNDO_INDEX(zone3_offset) \
824 (HAMMER_OFF_SHORT_ENCODE(zone3_offset) / HAMMER_BIGBLOCK_SIZE)
826 #define hammer_xlate_to_undo(volume, zone3_offset) \
827 ((volume)->vol0_undo_array[HAMMER_UNDO_INDEX(zone3_offset)] + \
828 (zone3_offset & HAMMER_BIGBLOCK_MASK64))
831 * Effective per-volume filesystem capacity including big-blocks for layer1/2
833 #define HAMMER_VOL_BUF_SIZE(volume) \
834 ((volume)->vol_buf_end - (volume)->vol_buf_beg)
837 * Record types are fairly straightforward. The B-Tree includes the record
838 * type in its index sort.
840 #define HAMMER_RECTYPE_UNKNOWN 0x0000
841 #define HAMMER_RECTYPE_INODE 0x0001 /* inode in obj_id space */
842 #define HAMMER_RECTYPE_DATA 0x0010
843 #define HAMMER_RECTYPE_DIRENTRY 0x0011
844 #define HAMMER_RECTYPE_DB 0x0012
845 #define HAMMER_RECTYPE_EXT 0x0013 /* ext attributes */
846 #define HAMMER_RECTYPE_FIX 0x0014 /* fixed attribute */
847 #define HAMMER_RECTYPE_PFS 0x0015 /* PFS management */
848 #define HAMMER_RECTYPE_SNAPSHOT 0x0016 /* Snapshot management */
849 #define HAMMER_RECTYPE_CONFIG 0x0017 /* hammer cleanup config */
850 #define HAMMER_RECTYPE_MAX 0xFFFF
852 #define HAMMER_RECTYPE_ENTRY_START (HAMMER_RECTYPE_INODE + 1)
853 #define HAMMER_RECTYPE_CLEAN_START HAMMER_RECTYPE_EXT
855 #define HAMMER_FIXKEY_SYMLINK 1
857 #define HAMMER_OBJTYPE_UNKNOWN 0 /* never exists on-disk as unknown */
858 #define HAMMER_OBJTYPE_DIRECTORY 1
859 #define HAMMER_OBJTYPE_REGFILE 2
860 #define HAMMER_OBJTYPE_DBFILE 3
861 #define HAMMER_OBJTYPE_FIFO 4
862 #define HAMMER_OBJTYPE_CDEV 5
863 #define HAMMER_OBJTYPE_BDEV 6
864 #define HAMMER_OBJTYPE_SOFTLINK 7
865 #define HAMMER_OBJTYPE_PSEUDOFS 8 /* pseudo filesystem obj */
866 #define HAMMER_OBJTYPE_SOCKET 9
869 * HAMMER inode attribute data
871 * The data reference for a HAMMER inode points to this structure. Any
872 * modifications to the contents of this structure will result in a
873 * replacement operation.
875 * parent_obj_id is only valid for directories (which cannot be hard-linked),
876 * and specifies the parent directory obj_id. This field will also be set
877 * for non-directory inodes as a recovery aid, but can wind up holding
878 * stale information. However, since object id's are not reused, the worse
879 * that happens is that the recovery code is unable to use it.
880 * A parent_obj_id of 0 means it's a root inode of root or non-root PFS.
882 * NOTE: Future note on directory hardlinks. We can implement a record type
883 * which allows us to point to multiple parent directories.
885 typedef struct hammer_inode_data {
886 uint16_t version; /* inode data version */
887 uint16_t mode; /* basic unix permissions */
888 uint32_t uflags; /* chflags */
889 uint32_t rmajor; /* used by device nodes */
890 uint32_t rminor; /* used by device nodes */
892 int64_t parent_obj_id; /* parent directory obj_id */
897 uint8_t cap_flags; /* capability support flags (extension) */
900 uint64_t nlinks; /* hard links */
901 uint64_t size; /* filesystem object size */
903 char symlink[24]; /* HAMMER_INODE_BASESYMLEN */
905 uint64_t mtime; /* mtime must be second-to-last */
906 uint64_t atime; /* atime must be last */
907 } *hammer_inode_data_t;
910 * Neither mtime nor atime upates are CRCd by the B-Tree element.
911 * mtime updates have UNDO, atime updates do not.
913 #define HAMMER_INODE_CRCSIZE \
914 offsetof(struct hammer_inode_data, mtime)
916 #define HAMMER_INODE_DATA_VERSION 1
917 #define HAMMER_OBJID_ROOT 1 /* root inodes # */
918 #define HAMMER_INODE_BASESYMLEN 24 /* see ext.symlink */
921 * Capability & implementation flags.
923 * HAMMER_INODE_CAP_DIR_LOCAL_INO - Use inode B-Tree localization
924 * for directory entries. Also see HAMMER_DIR_INODE_LOCALIZATION().
926 #define HAMMER_INODE_CAP_DIRHASH_MASK 0x03 /* directory: hash algorithm */
927 #define HAMMER_INODE_CAP_DIRHASH_ALG0 0x00
928 #define HAMMER_INODE_CAP_DIRHASH_ALG1 0x01
929 #define HAMMER_INODE_CAP_DIRHASH_ALG2 0x02
930 #define HAMMER_INODE_CAP_DIRHASH_ALG3 0x03
931 #define HAMMER_INODE_CAP_DIR_LOCAL_INO 0x04 /* use inode localization */
933 #define HAMMER_DATA_DOALIGN(offset) \
934 (((offset) + 15) & ~15)
935 #define HAMMER_DATA_DOALIGN_WITH(type, offset) \
936 (((type)(offset) + 15) & (~(type)15))
939 * A HAMMER directory entry associates a HAMMER filesystem object with a
940 * namespace. It is hooked into a pseudo-filesystem (with its own inode
941 * numbering space) in the filesystem by setting the high 16 bits of the
942 * localization field. The low 16 bits must be 0 and are reserved for
945 * Directory entries are indexed with a 128 bit namekey rather then an
946 * offset. A portion of the namekey is an iterator/randomizer to deal
949 * NOTE: leaf.base.obj_type from the related B-Tree leaf entry holds
950 * the filesystem object type of obj_id, e.g. a den_type equivalent.
951 * It is not stored in hammer_direntry_data.
953 * NOTE: name field / the filename data reference is NOT terminated with \0.
955 typedef struct hammer_direntry_data {
956 int64_t obj_id; /* object being referenced */
957 uint32_t localization; /* identify pseudo-filesystem */
959 char name[16]; /* name (extended) */
960 } *hammer_direntry_data_t;
962 #define HAMMER_ENTRY_NAME_OFF offsetof(struct hammer_direntry_data, name[0])
963 #define HAMMER_ENTRY_SIZE(nlen) offsetof(struct hammer_direntry_data, name[nlen])
966 * Symlink data which does not fit in the inode is stored in a separate
969 typedef struct hammer_symlink_data {
970 char name[16]; /* name (extended) */
971 } *hammer_symlink_data_t;
973 #define HAMMER_SYMLINK_NAME_OFF offsetof(struct hammer_symlink_data, name[0])
976 * The root inode for the primary filesystem and root inode for any
977 * pseudo-fs may be tagged with an optional data structure using
978 * HAMMER_RECTYPE_PFS and localization id. This structure allows
979 * the node to be used as a mirroring master or slave.
981 * When operating as a slave CD's into the node automatically become read-only
982 * and as-of sync_end_tid.
984 * When operating as a master the read PFSD info sets sync_end_tid to
985 * the most recently flushed TID.
987 * sync_low_tid is not yet used but will represent the highest pruning
988 * end-point, after which full history is available.
990 * We need to pack this structure making it equally sized on both 32-bit and
991 * 64-bit machines as it is part of struct hammer_ioc_mrecord_pfs which is
992 * send over the wire in hammer mirror operations. Only on 64-bit machines
993 * the size of this struct differ when packed or not. This leads us to the
994 * situation where old 64-bit systems (using the non-packed structure),
995 * which were never able to mirror to/from 32-bit systems, are now no longer
996 * able to mirror to/from newer 64-bit systems (using the packed structure).
998 struct hammer_pseudofs_data {
999 hammer_tid_t sync_low_tid; /* full history beyond this point */
1000 hammer_tid_t sync_beg_tid; /* earliest tid w/ full history avail */
1001 hammer_tid_t sync_end_tid; /* current synchronizatoin point */
1002 uint64_t sync_beg_ts; /* real-time of last completed sync */
1003 uint64_t sync_end_ts; /* initiation of current sync cycle */
1004 uuid_t shared_uuid; /* shared uuid (match required) */
1005 uuid_t unique_uuid; /* unique uuid of this master/slave */
1006 int32_t reserved01; /* reserved for future master_id */
1007 int32_t mirror_flags; /* misc flags */
1008 char label[64]; /* filesystem space label */
1009 char snapshots[64]; /* softlink dir for pruning */
1010 int32_t reserved02; /* was prune_{time,freq} */
1011 int32_t reserved03; /* was reblock_{time,freq} */
1012 int32_t reserved04; /* was snapshot_freq */
1013 int32_t prune_min; /* do not prune recent history */
1014 int32_t prune_max; /* do not retain history beyond here */
1015 int32_t reserved[16];
1018 typedef struct hammer_pseudofs_data *hammer_pseudofs_data_t;
1020 #define HAMMER_PFSD_SLAVE 0x00000001
1021 #define HAMMER_PFSD_DELETED 0x80000000
1023 #define hammer_is_pfs_slave(pfsd) \
1024 (((pfsd)->mirror_flags & HAMMER_PFSD_SLAVE) != 0)
1025 #define hammer_is_pfs_master(pfsd) \
1026 (!hammer_is_pfs_slave(pfsd))
1027 #define hammer_is_pfs_deleted(pfsd) \
1028 (((pfsd)->mirror_flags & HAMMER_PFSD_DELETED) != 0)
1030 #define HAMMER_MAX_PFS 65536
1031 #define HAMMER_MAX_PFSID (HAMMER_MAX_PFS - 1)
1032 #define HAMMER_ROOT_PFSID 0
1035 * Snapshot meta-data { Objid = HAMMER_OBJID_ROOT, Key = tid, rectype = SNAPSHOT }.
1037 * Snapshot records replace the old <fs>/snapshots/<softlink> methodology. Snapshot
1038 * records are mirrored but may be independantly managed once they are laid down on
1041 * NOTE: The b-tree key is signed, the tid is not, so callers must still sort the
1044 * NOTE: Reserved fields must be zero (as usual)
1046 typedef struct hammer_snapshot_data {
1047 hammer_tid_t tid; /* the snapshot TID itself (== key) */
1048 uint64_t ts; /* real-time when snapshot was made */
1049 uint64_t reserved01;
1050 uint64_t reserved02;
1051 char label[64]; /* user-supplied description */
1052 uint64_t reserved03[4];
1053 } *hammer_snapshot_data_t;
1056 * Config meta-data { ObjId = HAMMER_OBJID_ROOT, Key = 0, rectype = CONFIG }.
1058 * Used to store the hammer cleanup config. This data is not mirrored.
1060 typedef struct hammer_config_data {
1062 } *hammer_config_data_t;
1065 * Rollup various structures embedded as record data
1067 typedef union hammer_data_ondisk {
1068 struct hammer_direntry_data entry;
1069 struct hammer_inode_data inode;
1070 struct hammer_symlink_data symlink;
1071 struct hammer_pseudofs_data pfsd;
1072 struct hammer_snapshot_data snap;
1073 struct hammer_config_data config;
1074 } *hammer_data_ondisk_t;
1077 * Ondisk layout of B-Tree related structures
1079 #include "hammer_btree.h"
1081 #define HAMMER_DIR_INODE_LOCALIZATION(ino_data) \
1082 (((ino_data)->cap_flags & HAMMER_INODE_CAP_DIR_LOCAL_INO) ? \
1083 HAMMER_LOCALIZE_INODE : \
1084 HAMMER_LOCALIZE_MISC)
1086 #endif /* !VFS_HAMMER_DISK_H_ */