kernel - Cleanup gcc warnings

[dragonfly.git] / sys / dev / drm / drm_irq.c

/*
 * drm_irq.c IRQ and vblank support
 *
 * \author Rickard E. (Rik) Faith <faith@valinux.com>
 * \author Gareth Hughes <gareth@valinux.com>
 */

/*
 * Created: Fri Mar 19 14:30:16 1999 by faith@valinux.com
 *
 * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas.
 * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */

#include <drm/drmP.h>
#include "drm_trace.h"
#include "drm_internal.h"

#include <linux/slab.h>

#include <linux/export.h>

/* Access macro for slots in vblank timestamp ringbuffer. */
#define vblanktimestamp(dev, pipe, count) \
        ((dev)->vblank[pipe].time[(count) % DRM_VBLANKTIME_RBSIZE])

/* Retry timestamp calculation up to 3 times to satisfy
 * drm_timestamp_precision before giving up.
 */
#define DRM_TIMESTAMP_MAXRETRIES 3

/* Threshold in nanoseconds for detection of redundant
 * vblank irq in drm_handle_vblank(). 1 msec should be ok.
 */
#define DRM_REDUNDANT_VBLIRQ_THRESH_NS 1000000

static bool
drm_get_last_vbltimestamp(struct drm_device *dev, unsigned int pipe,
                          struct timeval *tvblank, unsigned flags);

unsigned int drm_timestamp_precision = 20;  /* Default to 20 usecs. */

/*
 * Default to use monotonic timestamps for wait-for-vblank and page-flip
 * complete events.
 */
unsigned int drm_timestamp_monotonic = 1;

int drm_vblank_offdelay = 5000;    /* Default to 5000 msecs. */

module_param_named(vblankoffdelay, drm_vblank_offdelay, int, 0600);
module_param_named(timestamp_precision_usec, drm_timestamp_precision, int, 0600);
module_param_named(timestamp_monotonic, drm_timestamp_monotonic, int, 0600);

static void store_vblank(struct drm_device *dev, unsigned int pipe,
                         u32 vblank_count_inc,
                         struct timeval *t_vblank, u32 last)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        u32 tslot;

        assert_spin_locked(&dev->vblank_time_lock);

        vblank->last = last;

        /* All writers hold the spinlock, but readers are serialized by
         * the latching of vblank->count below.
         */
        tslot = vblank->count + vblank_count_inc;
        vblanktimestamp(dev, pipe, tslot) = *t_vblank;

        /*
         * vblank timestamp updates are protected on the write side with
         * vblank_time_lock, but on the read side done locklessly using a
         * sequence-lock on the vblank counter. Ensure correct ordering using
         * memory barrriers. We need the barrier both before and also after the
         * counter update to synchronize with the next timestamp write.
         * The read-side barriers for this are in drm_vblank_count_and_time.
         */
        smp_wmb();
        vblank->count += vblank_count_inc;
        smp_wmb();
}

/**
 * drm_reset_vblank_timestamp - reset the last timestamp to the last vblank
 * @dev: DRM device
 * @pipe: index of CRTC for which to reset the timestamp
 *
 * Reset the stored timestamp for the current vblank count to correspond
 * to the last vblank occurred.
 *
 * Only to be called from drm_vblank_on().
 *
 * Note: caller must hold dev->vbl_lock since this reads & writes
 * device vblank fields.
 */
static void drm_reset_vblank_timestamp(struct drm_device *dev, unsigned int pipe)
{
        u32 cur_vblank;
        bool rc;
        struct timeval t_vblank;
        int count = DRM_TIMESTAMP_MAXRETRIES;

        lockmgr(&dev->vblank_time_lock, LK_EXCLUSIVE);

        /*
         * sample the current counter to avoid random jumps
         * when drm_vblank_enable() applies the diff
         */
        do {
                cur_vblank = dev->driver->get_vblank_counter(dev, pipe);
                rc = drm_get_last_vbltimestamp(dev, pipe, &t_vblank, 0);
        } while (cur_vblank != dev->driver->get_vblank_counter(dev, pipe) && --count > 0);

        /*
         * Only reinitialize corresponding vblank timestamp if high-precision query
         * available and didn't fail. Otherwise reinitialize delayed at next vblank
         * interrupt and assign 0 for now, to mark the vblanktimestamp as invalid.
         */
        if (!rc)
                t_vblank = (struct timeval) {0, 0};

        /*
         * +1 to make sure user will never see the same
         * vblank counter value before and after a modeset
         */
        store_vblank(dev, pipe, 1, &t_vblank, cur_vblank);

        lockmgr(&dev->vblank_time_lock, LK_RELEASE);
}

/**
 * drm_update_vblank_count - update the master vblank counter
 * @dev: DRM device
 * @pipe: counter to update
 *
 * Call back into the driver to update the appropriate vblank counter
 * (specified by @pipe).  Deal with wraparound, if it occurred, and
 * update the last read value so we can deal with wraparound on the next
 * call if necessary.
 *
 * Only necessary when going from off->on, to account for frames we
 * didn't get an interrupt for.
 *
 * Note: caller must hold dev->vbl_lock since this reads & writes
 * device vblank fields.
 */
static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
                                    unsigned long flags)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        u32 cur_vblank, diff;
        bool rc;
        struct timeval t_vblank;
        int count = DRM_TIMESTAMP_MAXRETRIES;
        int framedur_ns = vblank->framedur_ns;

        /*
         * Interrupts were disabled prior to this call, so deal with counter
         * wrap if needed.
         * NOTE!  It's possible we lost a full dev->max_vblank_count + 1 events
         * here if the register is small or we had vblank interrupts off for
         * a long time.
         *
         * We repeat the hardware vblank counter & timestamp query until
         * we get consistent results. This to prevent races between gpu
         * updating its hardware counter while we are retrieving the
         * corresponding vblank timestamp.
         */
        do {
                cur_vblank = dev->driver->get_vblank_counter(dev, pipe);
                rc = drm_get_last_vbltimestamp(dev, pipe, &t_vblank, flags);
        } while (cur_vblank != dev->driver->get_vblank_counter(dev, pipe) && --count > 0);

        if (dev->max_vblank_count != 0) {
                /* trust the hw counter when it's around */
                diff = (cur_vblank - vblank->last) & dev->max_vblank_count;
        } else if (rc && framedur_ns) {
                const struct timeval *t_old;
                u64 diff_ns;

                t_old = &vblanktimestamp(dev, pipe, vblank->count);
                diff_ns = timeval_to_ns(&t_vblank) - timeval_to_ns(t_old);

                /*
                 * Figure out how many vblanks we've missed based
                 * on the difference in the timestamps and the
                 * frame/field duration.
                 */
                diff = DIV_ROUND_CLOSEST_ULL(diff_ns, framedur_ns);

                if (diff == 0 && flags & DRM_CALLED_FROM_VBLIRQ)
                        DRM_DEBUG("crtc %u: Redundant vblirq ignored."
                                  " diff_ns = %lld, framedur_ns = %d)\n",
                                  pipe, (long long) diff_ns, framedur_ns);
        } else {
                /* some kind of default for drivers w/o accurate vbl timestamping */
                diff = (flags & DRM_CALLED_FROM_VBLIRQ) != 0;
        }

        DRM_DEBUG_VBLANK("updating vblank count on crtc %u:"
                  " current=%u, diff=%u, hw=%u hw_last=%u\n",
                  pipe, vblank->count, diff, cur_vblank, vblank->last);

        if (diff == 0) {
                WARN_ON_ONCE(cur_vblank != vblank->last);
                return;
        }

        /*
         * Only reinitialize corresponding vblank timestamp if high-precision query
         * available and didn't fail, or we were called from the vblank interrupt.
         * Otherwise reinitialize delayed at next vblank interrupt and assign 0
         * for now, to mark the vblanktimestamp as invalid.
         */
        if (!rc && (flags & DRM_CALLED_FROM_VBLIRQ) == 0)
                t_vblank = (struct timeval) {0, 0};

        store_vblank(dev, pipe, diff, &t_vblank, cur_vblank);
}

/*
 * Disable vblank irq's on crtc, make sure that last vblank count
 * of hardware and corresponding consistent software vblank counter
 * are preserved, even if there are any spurious vblank irq's after
 * disable.
 */
static void vblank_disable_and_save(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        unsigned long irqflags;

        /* Prevent vblank irq processing while disabling vblank irqs,
         * so no updates of timestamps or count can happen after we've
         * disabled. Needed to prevent races in case of delayed irq's.
         */
        spin_lock_irqsave(&dev->vblank_time_lock, irqflags);

        /*
         * Only disable vblank interrupts if they're enabled. This avoids
         * calling the ->disable_vblank() operation in atomic context with the
         * hardware potentially runtime suspended.
         */
        if (vblank->enabled) {
                dev->driver->disable_vblank(dev, pipe);
                vblank->enabled = false;
        }

        /*
         * Always update the count and timestamp to maintain the
         * appearance that the counter has been ticking all along until
         * this time. This makes the count account for the entire time
         * between drm_vblank_on() and drm_vblank_off().
         */
        drm_update_vblank_count(dev, pipe, 0);

        spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
}

static void vblank_disable_fn(unsigned long arg)
{
        struct drm_vblank_crtc *vblank = (void *)arg;
        struct drm_device *dev = vblank->dev;
        unsigned int pipe = vblank->pipe;
        unsigned long irqflags;

        if (!dev->vblank_disable_allowed)
                return;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        if (atomic_read(&vblank->refcount) == 0 && vblank->enabled) {
                DRM_DEBUG_VBLANK("disabling vblank on crtc %u\n", pipe);
                vblank_disable_and_save(dev, pipe);
        }
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}

/**
 * drm_vblank_cleanup - cleanup vblank support
 * @dev: DRM device
 *
 * This function cleans up any resources allocated in drm_vblank_init.
 */
void drm_vblank_cleanup(struct drm_device *dev)
{
        unsigned int pipe;

        /* Bail if the driver didn't call drm_vblank_init() */
        if (dev->num_crtcs == 0)
                return;

        for (pipe = 0; pipe < dev->num_crtcs; pipe++) {
                struct drm_vblank_crtc *vblank = &dev->vblank[pipe];

                WARN_ON(vblank->enabled &&
                        drm_core_check_feature(dev, DRIVER_MODESET));

                del_timer_sync(&vblank->disable_timer);
        }

        kfree(dev->vblank);

        dev->num_crtcs = 0;
}
EXPORT_SYMBOL(drm_vblank_cleanup);

/**
 * drm_vblank_init - initialize vblank support
 * @dev: DRM device
 * @num_crtcs: number of CRTCs supported by @dev
 *
 * This function initializes vblank support for @num_crtcs display pipelines.
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs)
{
        int ret = -ENOMEM;
        unsigned int i;

        lockinit(&dev->vbl_lock, "drmvbl", 0, LK_CANRECURSE);
        lockinit(&dev->vblank_time_lock, "drmvtl", 0, LK_CANRECURSE);

        dev->num_crtcs = num_crtcs;

        dev->vblank = kcalloc(num_crtcs, sizeof(*dev->vblank), GFP_KERNEL);
        if (!dev->vblank)
                goto err;

        for (i = 0; i < num_crtcs; i++) {
                struct drm_vblank_crtc *vblank = &dev->vblank[i];

                vblank->dev = dev;
                vblank->pipe = i;
                init_waitqueue_head(&vblank->queue);
                setup_timer(&vblank->disable_timer, vblank_disable_fn,
                            (unsigned long)vblank);
        }

        DRM_INFO("Supports vblank timestamp caching Rev 2 (21.10.2013).\n");

        /* Driver specific high-precision vblank timestamping supported? */
        if (dev->driver->get_vblank_timestamp)
                DRM_INFO("Driver supports precise vblank timestamp query.\n");
        else
                DRM_INFO("No driver support for vblank timestamp query.\n");

        /* Must have precise timestamping for reliable vblank instant disable */
        if (dev->vblank_disable_immediate && !dev->driver->get_vblank_timestamp) {
                dev->vblank_disable_immediate = false;
                DRM_INFO("Setting vblank_disable_immediate to false because "
                         "get_vblank_timestamp == NULL\n");
        }

        dev->vblank_disable_allowed = false;

        return 0;

err:
        dev->num_crtcs = 0;
        return ret;
}
EXPORT_SYMBOL(drm_vblank_init);

#if 0
static void drm_irq_vgaarb_nokms(void *cookie, bool state)
{
        struct drm_device *dev = cookie;

        if (dev->driver->vgaarb_irq) {
                dev->driver->vgaarb_irq(dev, state);
                return;
        }

        if (!dev->irq_enabled)
                return;

        if (state) {
                if (dev->driver->irq_uninstall)
                        dev->driver->irq_uninstall(dev);
        } else {
                if (dev->driver->irq_preinstall)
                        dev->driver->irq_preinstall(dev);
                if (dev->driver->irq_postinstall)
                        dev->driver->irq_postinstall(dev);
        }
}
#endif

/**
 * drm_irq_install - install IRQ handler
 * @dev: DRM device
 * @irq: IRQ number to install the handler for
 *
 * Initializes the IRQ related data. Installs the handler, calling the driver
 * irq_preinstall() and irq_postinstall() functions before and after the
 * installation.
 *
 * This is the simplified helper interface provided for drivers with no special
 * needs. Drivers which need to install interrupt handlers for multiple
 * interrupts must instead set drm_device->irq_enabled to signal the DRM core
 * that vblank interrupts are available.
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_irq_install(struct drm_device *dev, int irq)
{
        int ret;

        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                return -EINVAL;

        if (irq == 0)
                return -EINVAL;

        /* Driver must have been initialized */
        if (!dev->dev_private)
                return -EINVAL;

        if (dev->irq_enabled)
                return -EBUSY;
        dev->irq_enabled = true;

        DRM_DEBUG("irq=%d\n", irq);

        /* Before installing handler */
        if (dev->driver->irq_preinstall)
                dev->driver->irq_preinstall(dev);

        /* Install handler */
        ret = -bus_setup_intr(dev->dev, dev->irqr, INTR_MPSAFE,
            dev->driver->irq_handler, dev, &dev->irqh, &dev->irq_lock);

        if (ret != 0) {
                dev->irq_enabled = false;
                return ret;
        }

        /* After installing handler */
        if (dev->driver->irq_postinstall)
                ret = dev->driver->irq_postinstall(dev);

        if (ret < 0) {
                dev->irq_enabled = false;
                bus_teardown_intr(dev->dev, dev->irqr, dev->irqh);
        } else {
                dev->irq = irq;
        }

        return ret;
}
EXPORT_SYMBOL(drm_irq_install);

/**
 * drm_irq_uninstall - uninstall the IRQ handler
 * @dev: DRM device
 *
 * Calls the driver's irq_uninstall() function and unregisters the IRQ handler.
 * This should only be called by drivers which used drm_irq_install() to set up
 * their interrupt handler. Other drivers must only reset
 * drm_device->irq_enabled to false.
 *
 * Note that for kernel modesetting drivers it is a bug if this function fails.
 * The sanity checks are only to catch buggy user modesetting drivers which call
 * the same function through an ioctl.
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_irq_uninstall(struct drm_device *dev)
{
        unsigned long irqflags;
        bool irq_enabled;
        int i;

        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                return -EINVAL;

        irq_enabled = dev->irq_enabled;
        dev->irq_enabled = false;

        /*
         * Wake up any waiters so they don't hang. This is just to paper over
         * isssues for UMS drivers which aren't in full control of their
         * vblank/irq handling. KMS drivers must ensure that vblanks are all
         * disabled when uninstalling the irq handler.
         */
        if (dev->num_crtcs) {
                spin_lock_irqsave(&dev->vbl_lock, irqflags);
                for (i = 0; i < dev->num_crtcs; i++) {
                        struct drm_vblank_crtc *vblank = &dev->vblank[i];

                        if (!vblank->enabled)
                                continue;

                        WARN_ON(drm_core_check_feature(dev, DRIVER_MODESET));

                        vblank_disable_and_save(dev, i);
                        wake_up(&vblank->queue);
                }
                spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
        }

        if (!irq_enabled)
                return -EINVAL;

        DRM_DEBUG("irq=%d\n", dev->irq);

        if (dev->driver->irq_uninstall)
                dev->driver->irq_uninstall(dev);

        bus_teardown_intr(dev->dev, dev->irqr, dev->irqh);

        return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);

/*
 * IRQ control ioctl.
 *
 * \param inode device inode.
 * \param file_priv DRM file private.
 * \param cmd command.
 * \param arg user argument, pointing to a drm_control structure.
 * \return zero on success or a negative number on failure.
 *
 * Calls irq_install() or irq_uninstall() according to \p arg.
 */
int drm_control(struct drm_device *dev, void *data,
                struct drm_file *file_priv)
{
        struct drm_control *ctl = data;
        int ret = 0, irq;

        /* if we haven't irq we fallback for compatibility reasons -
         * this used to be a separate function in drm_dma.h
         */

        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                return 0;
        if (drm_core_check_feature(dev, DRIVER_MODESET))
                return 0;
        /* UMS was only ever support on pci devices. */
        if (WARN_ON(!dev->pdev))
                return -EINVAL;

        switch (ctl->func) {
        case DRM_INST_HANDLER:
                irq = dev->irq;

                if (dev->if_version < DRM_IF_VERSION(1, 2) &&
                    ctl->irq != irq)
                        return -EINVAL;
                mutex_lock(&dev->struct_mutex);
                ret = drm_irq_install(dev, irq);
                mutex_unlock(&dev->struct_mutex);

                return ret;
        case DRM_UNINST_HANDLER:
                mutex_lock(&dev->struct_mutex);
                ret = drm_irq_uninstall(dev);
                mutex_unlock(&dev->struct_mutex);

                return ret;
        default:
                return -EINVAL;
        }
}

/**
 * drm_calc_timestamping_constants - calculate vblank timestamp constants
 * @crtc: drm_crtc whose timestamp constants should be updated.
 * @mode: display mode containing the scanout timings
 *
 * Calculate and store various constants which are later
 * needed by vblank and swap-completion timestamping, e.g,
 * by drm_calc_vbltimestamp_from_scanoutpos(). They are
 * derived from CRTC's true scanout timing, so they take
 * things like panel scaling or other adjustments into account.
 */
void drm_calc_timestamping_constants(struct drm_crtc *crtc,
                                     const struct drm_display_mode *mode)
{
        struct drm_device *dev = crtc->dev;
        unsigned int pipe = drm_crtc_index(crtc);
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        int linedur_ns = 0, framedur_ns = 0;
        int dotclock = mode->crtc_clock;

        if (!dev->num_crtcs)
                return;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        /* Valid dotclock? */
        if (dotclock > 0) {
                int frame_size = mode->crtc_htotal * mode->crtc_vtotal;

                /*
                 * Convert scanline length in pixels and video
                 * dot clock to line duration and frame duration
                 * in nanoseconds:
                 */
                linedur_ns  = div_u64((u64) mode->crtc_htotal * 1000000, dotclock);
                framedur_ns = div_u64((u64) frame_size * 1000000, dotclock);

                /*
                 * Fields of interlaced scanout modes are only half a frame duration.
                 */
                if (mode->flags & DRM_MODE_FLAG_INTERLACE)
                        framedur_ns /= 2;
        } else
                DRM_ERROR("crtc %u: Can't calculate constants, dotclock = 0!\n",
                          crtc->base.id);

        vblank->linedur_ns  = linedur_ns;
        vblank->framedur_ns = framedur_ns;

        DRM_DEBUG("crtc %u: hwmode: htotal %d, vtotal %d, vdisplay %d\n",
                  crtc->base.id, mode->crtc_htotal,
                  mode->crtc_vtotal, mode->crtc_vdisplay);
        DRM_DEBUG("crtc %u: clock %d kHz framedur %d linedur %d\n",
                  crtc->base.id, dotclock, framedur_ns, linedur_ns);
}
EXPORT_SYMBOL(drm_calc_timestamping_constants);

/**
 * drm_calc_vbltimestamp_from_scanoutpos - precise vblank timestamp helper
 * @dev: DRM device
 * @pipe: index of CRTC whose vblank timestamp to retrieve
 * @max_error: Desired maximum allowable error in timestamps (nanosecs)
 *             On return contains true maximum error of timestamp
 * @vblank_time: Pointer to struct timeval which should receive the timestamp
 * @flags: Flags to pass to driver:
 *         0 = Default,
 *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler
 * @mode: mode which defines the scanout timings
 *
 * Implements calculation of exact vblank timestamps from given drm_display_mode
 * timings and current video scanout position of a CRTC. This can be called from
 * within get_vblank_timestamp() implementation of a kms driver to implement the
 * actual timestamping.
 *
 * Should return timestamps conforming to the OML_sync_control OpenML
 * extension specification. The timestamp corresponds to the end of
 * the vblank interval, aka start of scanout of topmost-leftmost display
 * pixel in the following video frame.
 *
 * Requires support for optional dev->driver->get_scanout_position()
 * in kms driver, plus a bit of setup code to provide a drm_display_mode
 * that corresponds to the true scanout timing.
 *
 * The current implementation only handles standard video modes. It
 * returns as no operation if a doublescan or interlaced video mode is
 * active. Higher level code is expected to handle this.
 *
 * Returns:
 * Negative value on error, failure or if not supported in current
 * video mode:
 *
 * -EINVAL   - Invalid CRTC.
 * -EAGAIN   - Temporary unavailable, e.g., called before initial modeset.
 * -ENOTSUPP - Function not supported in current display mode.
 * -EIO      - Failed, e.g., due to failed scanout position query.
 *
 * Returns or'ed positive status flags on success:
 *
 * DRM_VBLANKTIME_SCANOUTPOS_METHOD - Signal this method used for timestamping.
 * DRM_VBLANKTIME_INVBL - Timestamp taken while scanout was in vblank interval.
 *
 */
int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
                                          unsigned int pipe,
                                          int *max_error,
                                          struct timeval *vblank_time,
                                          unsigned flags,
                                          const struct drm_display_mode *mode)
{
        struct timeval tv_etime;
        ktime_t stime, etime;
        unsigned int vbl_status;
        int ret = DRM_VBLANKTIME_SCANOUTPOS_METHOD;
        int vpos, hpos, i;
        int delta_ns, duration_ns;

        if (pipe >= dev->num_crtcs) {
                DRM_ERROR("Invalid crtc %u\n", pipe);
                return -EINVAL;
        }

        /* Scanout position query not supported? Should not happen. */
        if (!dev->driver->get_scanout_position) {
                DRM_ERROR("Called from driver w/o get_scanout_position()!?\n");
                return -EIO;
        }

        /* If mode timing undefined, just return as no-op:
         * Happens during initial modesetting of a crtc.
         */
        if (mode->crtc_clock == 0) {
                DRM_DEBUG_VBLANK("crtc %u: Noop due to uninitialized mode.\n", pipe);
                return -EAGAIN;
        }

        /* Get current scanout position with system timestamp.
         * Repeat query up to DRM_TIMESTAMP_MAXRETRIES times
         * if single query takes longer than max_error nanoseconds.
         *
         * This guarantees a tight bound on maximum error if
         * code gets preempted or delayed for some reason.
         */
        for (i = 0; i < DRM_TIMESTAMP_MAXRETRIES; i++) {
                /*
                 * Get vertical and horizontal scanout position vpos, hpos,
                 * and bounding timestamps stime, etime, pre/post query.
                 */
                vbl_status = dev->driver->get_scanout_position(dev, pipe, flags,
                                                               &vpos, &hpos,
                                                               &stime, &etime,
                                                               mode);

                /* Return as no-op if scanout query unsupported or failed. */
                if (!(vbl_status & DRM_SCANOUTPOS_VALID)) {
                        DRM_DEBUG_VBLANK("crtc %u : scanoutpos query failed [0x%x].\n",
                                  pipe, vbl_status);
                        return -EIO;
                }

                /* Compute uncertainty in timestamp of scanout position query. */
                duration_ns = ktime_to_ns(etime) - ktime_to_ns(stime);

                /* Accept result with <  max_error nsecs timing uncertainty. */
                if (duration_ns <= *max_error)
                        break;
        }

        /* Noisy system timing? */
        if (i == DRM_TIMESTAMP_MAXRETRIES) {
                DRM_DEBUG_VBLANK("crtc %u: Noisy timestamp %d us > %d us [%d reps].\n",
                          pipe, duration_ns/1000, *max_error/1000, i);
        }

        /* Return upper bound of timestamp precision error. */
        *max_error = duration_ns;

        /* Check if in vblank area:
         * vpos is >=0 in video scanout area, but negative
         * within vblank area, counting down the number of lines until
         * start of scanout.
         */
        if (vbl_status & DRM_SCANOUTPOS_IN_VBLANK)
                ret |= DRM_VBLANKTIME_IN_VBLANK;

        /* Convert scanout position into elapsed time at raw_time query
         * since start of scanout at first display scanline. delta_ns
         * can be negative if start of scanout hasn't happened yet.
         */
        delta_ns = div_s64(1000000LL * (vpos * mode->crtc_htotal + hpos),
                           mode->crtc_clock);

        if (!drm_timestamp_monotonic)
                etime = ktime_mono_to_real(etime);

        /* save this only for debugging purposes */
        tv_etime = ktime_to_timeval(etime);
        /* Subtract time delta from raw timestamp to get final
         * vblank_time timestamp for end of vblank.
         */
        if (delta_ns < 0)
                etime = ktime_add_ns(etime, -delta_ns);
        else
                etime = ktime_sub_ns(etime, delta_ns);
        *vblank_time = ktime_to_timeval(etime);

        DRM_DEBUG_VBLANK("crtc %u : v 0x%x p(%d,%d)@ %ld.%ld -> %ld.%ld [e %d us, %d rep]\n",
                  pipe, vbl_status, hpos, vpos,
                  (long)tv_etime.tv_sec, (long)tv_etime.tv_usec,
                  (long)vblank_time->tv_sec, (long)vblank_time->tv_usec,
                  duration_ns/1000, i);

        return ret;
}
EXPORT_SYMBOL(drm_calc_vbltimestamp_from_scanoutpos);

static struct timeval get_drm_timestamp(void)
{
        ktime_t now;

        now = drm_timestamp_monotonic ? ktime_get() : ktime_get_real();
        return ktime_to_timeval(now);
}

/**
 * drm_get_last_vbltimestamp - retrieve raw timestamp for the most recent
 *                             vblank interval
 * @dev: DRM device
 * @pipe: index of CRTC whose vblank timestamp to retrieve
 * @tvblank: Pointer to target struct timeval which should receive the timestamp
 * @flags: Flags to pass to driver:
 *         0 = Default,
 *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler
 *
 * Fetches the system timestamp corresponding to the time of the most recent
 * vblank interval on specified CRTC. May call into kms-driver to
 * compute the timestamp with a high-precision GPU specific method.
 *
 * Returns zero if timestamp originates from uncorrected do_gettimeofday()
 * call, i.e., it isn't very precisely locked to the true vblank.
 *
 * Returns:
 * True if timestamp is considered to be very precise, false otherwise.
 */
static bool
drm_get_last_vbltimestamp(struct drm_device *dev, unsigned int pipe,
                          struct timeval *tvblank, unsigned flags)
{
        int ret;

        /* Define requested maximum error on timestamps (nanoseconds). */
        int max_error = (int) drm_timestamp_precision * 1000;

        /* Query driver if possible and precision timestamping enabled. */
        if (dev->driver->get_vblank_timestamp && (max_error > 0)) {
                ret = dev->driver->get_vblank_timestamp(dev, pipe, &max_error,
                                                        tvblank, flags);
                if (ret > 0)
                        return true;
        }

        /* GPU high precision timestamp query unsupported or failed.
         * Return current monotonic/gettimeofday timestamp as best estimate.
         */
        *tvblank = get_drm_timestamp();

        return false;
}

/**
 * drm_vblank_count - retrieve "cooked" vblank counter value
 * @dev: DRM device
 * @pipe: index of CRTC for which to retrieve the counter
 *
 * Fetches the "cooked" vblank count value that represents the number of
 * vblank events since the system was booted, including lost events due to
 * modesetting activity.
 *
 * This is the legacy version of drm_crtc_vblank_count().
 *
 * Returns:
 * The software vblank counter.
 */
u32 drm_vblank_count(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];

        if (WARN_ON(pipe >= dev->num_crtcs))
                return 0;

        return vblank->count;
}
EXPORT_SYMBOL(drm_vblank_count);

/**
 * drm_crtc_vblank_count - retrieve "cooked" vblank counter value
 * @crtc: which counter to retrieve
 *
 * Fetches the "cooked" vblank count value that represents the number of
 * vblank events since the system was booted, including lost events due to
 * modesetting activity.
 *
 * This is the native KMS version of drm_vblank_count().
 *
 * Returns:
 * The software vblank counter.
 */
u32 drm_crtc_vblank_count(struct drm_crtc *crtc)
{
        return drm_vblank_count(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_count);

/**
 * drm_vblank_count_and_time - retrieve "cooked" vblank counter value and the
 *     system timestamp corresponding to that vblank counter value.
 * @dev: DRM device
 * @pipe: index of CRTC whose counter to retrieve
 * @vblanktime: Pointer to struct timeval to receive the vblank timestamp.
 *
 * Fetches the "cooked" vblank count value that represents the number of
 * vblank events since the system was booted, including lost events due to
 * modesetting activity. Returns corresponding system timestamp of the time
 * of the vblank interval that corresponds to the current vblank counter value.
 *
 * This is the legacy version of drm_crtc_vblank_count_and_time().
 */
u32 drm_vblank_count_and_time(struct drm_device *dev, unsigned int pipe,
                              struct timeval *vblanktime)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        int count = DRM_TIMESTAMP_MAXRETRIES;
        u32 cur_vblank;

        vblanktime->tv_sec = 0;         /* silence gcc warning */
        vblanktime->tv_usec = 0;        /* silence gcc warning */
        if (WARN_ON(pipe >= dev->num_crtcs))
                return 0;

        /*
         * Vblank timestamps are read lockless. To ensure consistency the vblank
         * counter is rechecked and ordering is ensured using memory barriers.
         * This works like a seqlock. The write-side barriers are in store_vblank.
         */
        do {
                cur_vblank = vblank->count;
                smp_rmb();
                *vblanktime = vblanktimestamp(dev, pipe, cur_vblank);
                smp_rmb();
        } while (cur_vblank != vblank->count && --count > 0);

        return cur_vblank;
}
EXPORT_SYMBOL(drm_vblank_count_and_time);

/**
 * drm_crtc_vblank_count_and_time - retrieve "cooked" vblank counter value
 *     and the system timestamp corresponding to that vblank counter value
 * @crtc: which counter to retrieve
 * @vblanktime: Pointer to struct timeval to receive the vblank timestamp.
 *
 * Fetches the "cooked" vblank count value that represents the number of
 * vblank events since the system was booted, including lost events due to
 * modesetting activity. Returns corresponding system timestamp of the time
 * of the vblank interval that corresponds to the current vblank counter value.
 *
 * This is the native KMS version of drm_vblank_count_and_time().
 */
u32 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc,
                                   struct timeval *vblanktime)
{
        return drm_vblank_count_and_time(crtc->dev, drm_crtc_index(crtc),
                                         vblanktime);
}
EXPORT_SYMBOL(drm_crtc_vblank_count_and_time);

static void send_vblank_event(struct drm_device *dev,
                struct drm_pending_vblank_event *e,
                unsigned long seq, struct timeval *now)
{
        assert_spin_locked(&dev->event_lock);

        e->event.sequence = seq;
        e->event.tv_sec = now->tv_sec;
        e->event.tv_usec = now->tv_usec;

        list_add_tail(&e->base.link,
                      &e->base.file_priv->event_list);
        wake_up_interruptible(&e->base.file_priv->event_wait);
#ifdef __DragonFly__
        KNOTE(&e->base.file_priv->dkq.ki_note, 0);
#endif
        trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
                                         e->event.sequence);
}

/**
 * drm_arm_vblank_event - arm vblank event after pageflip
 * @dev: DRM device
 * @pipe: CRTC index
 * @e: the event to prepare to send
 *
 * A lot of drivers need to generate vblank events for the very next vblank
 * interrupt. For example when the page flip interrupt happens when the page
 * flip gets armed, but not when it actually executes within the next vblank
 * period. This helper function implements exactly the required vblank arming
 * behaviour.
 *
 * Caller must hold event lock. Caller must also hold a vblank reference for
 * the event @e, which will be dropped when the next vblank arrives.
 *
 * This is the legacy version of drm_crtc_arm_vblank_event().
 */
void drm_arm_vblank_event(struct drm_device *dev, unsigned int pipe,
                          struct drm_pending_vblank_event *e)
{
        assert_spin_locked(&dev->event_lock);

        e->pipe = pipe;
        e->event.sequence = drm_vblank_count(dev, pipe);
        list_add_tail(&e->base.link, &dev->vblank_event_list);
}
EXPORT_SYMBOL(drm_arm_vblank_event);

/**
 * drm_crtc_arm_vblank_event - arm vblank event after pageflip
 * @crtc: the source CRTC of the vblank event
 * @e: the event to send
 *
 * A lot of drivers need to generate vblank events for the very next vblank
 * interrupt. For example when the page flip interrupt happens when the page
 * flip gets armed, but not when it actually executes within the next vblank
 * period. This helper function implements exactly the required vblank arming
 * behaviour.
 *
 * Caller must hold event lock. Caller must also hold a vblank reference for
 * the event @e, which will be dropped when the next vblank arrives.
 *
 * This is the native KMS version of drm_arm_vblank_event().
 */
void drm_crtc_arm_vblank_event(struct drm_crtc *crtc,
                               struct drm_pending_vblank_event *e)
{
        drm_arm_vblank_event(crtc->dev, drm_crtc_index(crtc), e);
}
EXPORT_SYMBOL(drm_crtc_arm_vblank_event);

/**
 * drm_send_vblank_event - helper to send vblank event after pageflip
 * @dev: DRM device
 * @pipe: CRTC index
 * @e: the event to send
 *
 * Updates sequence # and timestamp on event, and sends it to userspace.
 * Caller must hold event lock.
 *
 * This is the legacy version of drm_crtc_send_vblank_event().
 */
void drm_send_vblank_event(struct drm_device *dev, unsigned int pipe,
                           struct drm_pending_vblank_event *e)
{
        struct timeval now;
        unsigned int seq;

        if (dev->num_crtcs > 0) {
                seq = drm_vblank_count_and_time(dev, pipe, &now);
        } else {
                seq = 0;

                now = get_drm_timestamp();
        }
        e->pipe = pipe;
        send_vblank_event(dev, e, seq, &now);
}
EXPORT_SYMBOL(drm_send_vblank_event);

/**
 * drm_crtc_send_vblank_event - helper to send vblank event after pageflip
 * @crtc: the source CRTC of the vblank event
 * @e: the event to send
 *
 * Updates sequence # and timestamp on event, and sends it to userspace.
 * Caller must hold event lock.
 *
 * This is the native KMS version of drm_send_vblank_event().
 */
void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
                                struct drm_pending_vblank_event *e)
{
        drm_send_vblank_event(crtc->dev, drm_crtc_index(crtc), e);
}
EXPORT_SYMBOL(drm_crtc_send_vblank_event);

/**
 * drm_vblank_enable - enable the vblank interrupt on a CRTC
 * @dev: DRM device
 * @pipe: CRTC index
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
static int drm_vblank_enable(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        int ret = 0;

        assert_spin_locked(&dev->vbl_lock);

        lockmgr(&dev->vblank_time_lock, LK_EXCLUSIVE);

        if (!vblank->enabled) {
                /*
                 * Enable vblank irqs under vblank_time_lock protection.
                 * All vblank count & timestamp updates are held off
                 * until we are done reinitializing master counter and
                 * timestamps. Filtercode in drm_handle_vblank() will
                 * prevent double-accounting of same vblank interval.
                 */
                ret = dev->driver->enable_vblank(dev, pipe);
                DRM_DEBUG_VBLANK("enabling vblank on crtc %u, ret: %d\n", pipe, ret);
                if (ret)
                        atomic_dec(&vblank->refcount);
                else {
                        vblank->enabled = true;
                        drm_update_vblank_count(dev, pipe, 0);
                }
        }

        lockmgr(&dev->vblank_time_lock, LK_RELEASE);

        return ret;
}

/**
 * drm_vblank_get - get a reference count on vblank events
 * @dev: DRM device
 * @pipe: index of CRTC to own
 *
 * Acquire a reference count on vblank events to avoid having them disabled
 * while in use.
 *
 * This is the legacy version of drm_crtc_vblank_get().
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_vblank_get(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        unsigned long irqflags;
        int ret = 0;

        if (!dev->num_crtcs)
                return -EINVAL;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return -EINVAL;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        /* Going from 0->1 means we have to enable interrupts again */
        if (atomic_add_return(1, &vblank->refcount) == 1) {
                ret = drm_vblank_enable(dev, pipe);
        } else {
                if (!vblank->enabled) {
                        atomic_dec(&vblank->refcount);
                        ret = -EINVAL;
                }
        }
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);

        return ret;
}
EXPORT_SYMBOL(drm_vblank_get);

/**
 * drm_crtc_vblank_get - get a reference count on vblank events
 * @crtc: which CRTC to own
 *
 * Acquire a reference count on vblank events to avoid having them disabled
 * while in use.
 *
 * This is the native kms version of drm_vblank_get().
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_crtc_vblank_get(struct drm_crtc *crtc)
{
        return drm_vblank_get(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_get);

/**
 * drm_vblank_put - release ownership of vblank events
 * @dev: DRM device
 * @pipe: index of CRTC to release
 *
 * Release ownership of a given vblank counter, turning off interrupts
 * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
 *
 * This is the legacy version of drm_crtc_vblank_put().
 */
void drm_vblank_put(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        if (WARN_ON(atomic_read(&vblank->refcount) == 0))
                return;

        /* Last user schedules interrupt disable */
        if (atomic_dec_and_test(&vblank->refcount)) {
                if (drm_vblank_offdelay == 0)
                        return;
                else if (dev->vblank_disable_immediate || drm_vblank_offdelay < 0)
                        vblank_disable_fn((unsigned long)vblank);
                else
                        mod_timer(&vblank->disable_timer,
                                  jiffies + ((drm_vblank_offdelay * HZ)/1000));
        }
}
EXPORT_SYMBOL(drm_vblank_put);

/**
 * drm_crtc_vblank_put - give up ownership of vblank events
 * @crtc: which counter to give up
 *
 * Release ownership of a given vblank counter, turning off interrupts
 * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
 *
 * This is the native kms version of drm_vblank_put().
 */
void drm_crtc_vblank_put(struct drm_crtc *crtc)
{
        drm_vblank_put(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_put);

/**
 * drm_wait_one_vblank - wait for one vblank
 * @dev: DRM device
 * @pipe: CRTC index
 *
 * This waits for one vblank to pass on @pipe, using the irq driver interfaces.
 * It is a failure to call this when the vblank irq for @pipe is disabled, e.g.
 * due to lack of driver support or because the crtc is off.
 */
void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        int ret;
        u32 last;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        ret = drm_vblank_get(dev, pipe);
        if (WARN(ret, "vblank not available on crtc %i, ret=%i\n", pipe, ret))
                return;

        last = drm_vblank_count(dev, pipe);

        ret = wait_event_timeout(vblank->queue,
                                 last != drm_vblank_count(dev, pipe),
                                 msecs_to_jiffies(100));

        WARN(ret == 0, "vblank wait timed out on crtc %i\n", pipe);

        drm_vblank_put(dev, pipe);
}
EXPORT_SYMBOL(drm_wait_one_vblank);

/**
 * drm_crtc_wait_one_vblank - wait for one vblank
 * @crtc: DRM crtc
 *
 * This waits for one vblank to pass on @crtc, using the irq driver interfaces.
 * It is a failure to call this when the vblank irq for @crtc is disabled, e.g.
 * due to lack of driver support or because the crtc is off.
 */
void drm_crtc_wait_one_vblank(struct drm_crtc *crtc)
{
        drm_wait_one_vblank(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_wait_one_vblank);

/**
 * drm_vblank_off - disable vblank events on a CRTC
 * @dev: DRM device
 * @pipe: CRTC index
 *
 * Drivers can use this function to shut down the vblank interrupt handling when
 * disabling a crtc. This function ensures that the latest vblank frame count is
 * stored so that drm_vblank_on() can restore it again.
 *
 * Drivers must use this function when the hardware vblank counter can get
 * reset, e.g. when suspending.
 *
 * This is the legacy version of drm_crtc_vblank_off().
 */
void drm_vblank_off(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        struct drm_pending_vblank_event *e, *t;
        struct timeval now;
        unsigned long irqflags;
        unsigned int seq;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        spin_lock_irqsave(&dev->event_lock, irqflags);

        lockmgr(&dev->vbl_lock, LK_EXCLUSIVE);
        vblank_disable_and_save(dev, pipe);
        wake_up(&vblank->queue);

        /*
         * Prevent subsequent drm_vblank_get() from re-enabling
         * the vblank interrupt by bumping the refcount.
         */
        if (!vblank->inmodeset) {
                atomic_inc(&vblank->refcount);
                vblank->inmodeset = 1;
        }
        lockmgr(&dev->vbl_lock, LK_RELEASE);

        /* Send any queued vblank events, lest the natives grow disquiet */
        seq = drm_vblank_count_and_time(dev, pipe, &now);

        list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
                if (e->pipe != pipe)
                        continue;
                DRM_DEBUG_VBLANK("Sending premature vblank event on disable: \
                          wanted %d, current %d\n",
                          e->event.sequence, seq);
                list_del(&e->base.link);
                drm_vblank_put(dev, pipe);
                send_vblank_event(dev, e, seq, &now);
        }
        spin_unlock_irqrestore(&dev->event_lock, irqflags);
}
EXPORT_SYMBOL(drm_vblank_off);

/**
 * drm_crtc_vblank_off - disable vblank events on a CRTC
 * @crtc: CRTC in question
 *
 * Drivers can use this function to shut down the vblank interrupt handling when
 * disabling a crtc. This function ensures that the latest vblank frame count is
 * stored so that drm_vblank_on can restore it again.
 *
 * Drivers must use this function when the hardware vblank counter can get
 * reset, e.g. when suspending.
 *
 * This is the native kms version of drm_vblank_off().
 */
void drm_crtc_vblank_off(struct drm_crtc *crtc)
{
        drm_vblank_off(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_off);

/**
 * drm_crtc_vblank_reset - reset vblank state to off on a CRTC
 * @crtc: CRTC in question
 *
 * Drivers can use this function to reset the vblank state to off at load time.
 * Drivers should use this together with the drm_crtc_vblank_off() and
 * drm_crtc_vblank_on() functions. The difference compared to
 * drm_crtc_vblank_off() is that this function doesn't save the vblank counter
 * and hence doesn't need to call any driver hooks.
 */
void drm_crtc_vblank_reset(struct drm_crtc *crtc)
{
        struct drm_device *dev = crtc->dev;
        unsigned long irqflags;
        unsigned int pipe = drm_crtc_index(crtc);
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        /*
         * Prevent subsequent drm_vblank_get() from enabling the vblank
         * interrupt by bumping the refcount.
         */
        if (!vblank->inmodeset) {
                atomic_inc(&vblank->refcount);
                vblank->inmodeset = 1;
        }
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);

        WARN_ON(!list_empty(&dev->vblank_event_list));
}
EXPORT_SYMBOL(drm_crtc_vblank_reset);

/**
 * drm_vblank_on - enable vblank events on a CRTC
 * @dev: DRM device
 * @pipe: CRTC index
 *
 * This functions restores the vblank interrupt state captured with
 * drm_vblank_off() again. Note that calls to drm_vblank_on() and
 * drm_vblank_off() can be unbalanced and so can also be unconditionally called
 * in driver load code to reflect the current hardware state of the crtc.
 *
 * This is the legacy version of drm_crtc_vblank_on().
 */
void drm_vblank_on(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        unsigned long irqflags;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        /* Drop our private "prevent drm_vblank_get" refcount */
        if (vblank->inmodeset) {
                atomic_dec(&vblank->refcount);
                vblank->inmodeset = 0;
        }

        drm_reset_vblank_timestamp(dev, pipe);

        /*
         * re-enable interrupts if there are users left, or the
         * user wishes vblank interrupts to be enabled all the time.
         */
        if (atomic_read(&vblank->refcount) != 0 ||
            (!dev->vblank_disable_immediate && drm_vblank_offdelay == 0))
                WARN_ON(drm_vblank_enable(dev, pipe));
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
EXPORT_SYMBOL(drm_vblank_on);

/**
 * drm_crtc_vblank_on - enable vblank events on a CRTC
 * @crtc: CRTC in question
 *
 * This functions restores the vblank interrupt state captured with
 * drm_vblank_off() again. Note that calls to drm_vblank_on() and
 * drm_vblank_off() can be unbalanced and so can also be unconditionally called
 * in driver load code to reflect the current hardware state of the crtc.
 *
 * This is the native kms version of drm_vblank_on().
 */
void drm_crtc_vblank_on(struct drm_crtc *crtc)
{
        drm_vblank_on(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_on);

/**
 * drm_vblank_pre_modeset - account for vblanks across mode sets
 * @dev: DRM device
 * @pipe: CRTC index
 *
 * Account for vblank events across mode setting events, which will likely
 * reset the hardware frame counter.
 *
 * This is done by grabbing a temporary vblank reference to ensure that the
 * vblank interrupt keeps running across the modeset sequence. With this the
 * software-side vblank frame counting will ensure that there are no jumps or
 * discontinuities.
 *
 * Unfortunately this approach is racy and also doesn't work when the vblank
 * interrupt stops running, e.g. across system suspend resume. It is therefore
 * highly recommended that drivers use the newer drm_vblank_off() and
 * drm_vblank_on() instead. drm_vblank_pre_modeset() only works correctly when
 * using "cooked" software vblank frame counters and not relying on any hardware
 * counters.
 *
 * Drivers must call drm_vblank_post_modeset() when re-enabling the same crtc
 * again.
 */
void drm_vblank_pre_modeset(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];

        /* vblank is not initialized (IRQ not installed ?), or has been freed */
        if (!dev->num_crtcs)
                return;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        /*
         * To avoid all the problems that might happen if interrupts
         * were enabled/disabled around or between these calls, we just
         * have the kernel take a reference on the CRTC (just once though
         * to avoid corrupting the count if multiple, mismatch calls occur),
         * so that interrupts remain enabled in the interim.
         */
        if (!vblank->inmodeset) {
                vblank->inmodeset = 0x1;
                if (drm_vblank_get(dev, pipe) == 0)
                        vblank->inmodeset |= 0x2;
        }
}
EXPORT_SYMBOL(drm_vblank_pre_modeset);

/**
 * drm_vblank_post_modeset - undo drm_vblank_pre_modeset changes
 * @dev: DRM device
 * @pipe: CRTC index
 *
 * This function again drops the temporary vblank reference acquired in
 * drm_vblank_pre_modeset.
 */
void drm_vblank_post_modeset(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        unsigned long irqflags;

        /* vblank is not initialized (IRQ not installed ?), or has been freed */
        if (!dev->num_crtcs)
                return;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return;

        if (vblank->inmodeset) {
                spin_lock_irqsave(&dev->vbl_lock, irqflags);
                dev->vblank_disable_allowed = true;
                spin_unlock_irqrestore(&dev->vbl_lock, irqflags);

                if (vblank->inmodeset & 0x2)
                        drm_vblank_put(dev, pipe);

                vblank->inmodeset = 0;
        }
}
EXPORT_SYMBOL(drm_vblank_post_modeset);

/*
 * drm_modeset_ctl - handle vblank event counter changes across mode switch
 * @DRM_IOCTL_ARGS: standard ioctl arguments
 *
 * Applications should call the %_DRM_PRE_MODESET and %_DRM_POST_MODESET
 * ioctls around modesetting so that any lost vblank events are accounted for.
 *
 * Generally the counter will reset across mode sets.  If interrupts are
 * enabled around this call, we don't have to do anything since the counter
 * will have already been incremented.
 */
int drm_modeset_ctl(struct drm_device *dev, void *data,
                    struct drm_file *file_priv)
{
        struct drm_modeset_ctl *modeset = data;
        unsigned int pipe;

        /* If drm_vblank_init() hasn't been called yet, just no-op */
        if (!dev->num_crtcs)
                return 0;

        /* KMS drivers handle this internally */
        if (drm_core_check_feature(dev, DRIVER_MODESET))
                return 0;

        pipe = modeset->crtc;
        if (pipe >= dev->num_crtcs)
                return -EINVAL;

        switch (modeset->cmd) {
        case _DRM_PRE_MODESET:
                drm_vblank_pre_modeset(dev, pipe);
                break;
        case _DRM_POST_MODESET:
                drm_vblank_post_modeset(dev, pipe);
                break;
        default:
                return -EINVAL;
        }

        return 0;
}

#ifdef __DragonFly__
/*
 * The Linux layer version of kfree() is a macro and can't be called
 * directly via a function pointer
 */
static void
drm_vblank_event_destroy(struct drm_pending_event *e)
{
        kfree(e);
}
#endif

static int drm_queue_vblank_event(struct drm_device *dev, unsigned int pipe,
                                  union drm_wait_vblank *vblwait,
                                  struct drm_file *file_priv)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        struct drm_pending_vblank_event *e;
        struct timeval now;
        unsigned long flags;
        unsigned int seq;
        int ret;

        e = kzalloc(sizeof(*e), GFP_KERNEL);
        if (e == NULL) {
                ret = -ENOMEM;
                goto err_put;
        }

        e->pipe = pipe;
        e->base.pid = curproc->p_pid;
        e->event.base.type = DRM_EVENT_VBLANK;
        e->event.base.length = sizeof(e->event);
        e->event.user_data = vblwait->request.signal;
        e->base.event = &e->event.base;
        e->base.file_priv = file_priv;
#ifdef __DragonFly__
        e->base.destroy = drm_vblank_event_destroy;
#else
        e->base.destroy = (void (*) (struct drm_pending_event *)) kfree;
#endif

        spin_lock_irqsave(&dev->event_lock, flags);

        /*
         * drm_vblank_off() might have been called after we called
         * drm_vblank_get(). drm_vblank_off() holds event_lock
         * around the vblank disable, so no need for further locking.
         * The reference from drm_vblank_get() protects against
         * vblank disable from another source.
         */
        if (!vblank->enabled) {
                ret = -EINVAL;
                goto err_unlock;
        }

        if (file_priv->event_space < sizeof(e->event)) {
                ret = -EBUSY;
                goto err_unlock;
        }

        file_priv->event_space -= sizeof(e->event);
        seq = drm_vblank_count_and_time(dev, pipe, &now);

        if ((vblwait->request.type & _DRM_VBLANK_NEXTONMISS) &&
            (seq - vblwait->request.sequence) <= (1 << 23)) {
                vblwait->request.sequence = seq + 1;
                vblwait->reply.sequence = vblwait->request.sequence;
        }

        DRM_DEBUG_VBLANK("event on vblank count %d, current %d, crtc %u\n",
                  vblwait->request.sequence, seq, pipe);

        trace_drm_vblank_event_queued(current->pid, pipe,
                                      vblwait->request.sequence);

        e->event.sequence = vblwait->request.sequence;
        if ((seq - vblwait->request.sequence) <= (1 << 23)) {
                drm_vblank_put(dev, pipe);
                send_vblank_event(dev, e, seq, &now);
                vblwait->reply.sequence = seq;
        } else {
                /* drm_handle_vblank_events will call drm_vblank_put */
                list_add_tail(&e->base.link, &dev->vblank_event_list);
                vblwait->reply.sequence = vblwait->request.sequence;
        }

        spin_unlock_irqrestore(&dev->event_lock, flags);

        return 0;

err_unlock:
        spin_unlock_irqrestore(&dev->event_lock, flags);
        kfree(e);
err_put:
        drm_vblank_put(dev, pipe);
        return ret;
}

/*
 * Wait for VBLANK.
 *
 * \param inode device inode.
 * \param file_priv DRM file private.
 * \param cmd command.
 * \param data user argument, pointing to a drm_wait_vblank structure.
 * \return zero on success or a negative number on failure.
 *
 * This function enables the vblank interrupt on the pipe requested, then
 * sleeps waiting for the requested sequence number to occur, and drops
 * the vblank interrupt refcount afterwards. (vblank IRQ disable follows that
 * after a timeout with no further vblank waits scheduled).
 */
int drm_wait_vblank(struct drm_device *dev, void *data,
                    struct drm_file *file_priv)
{
        struct drm_vblank_crtc *vblank;
        union drm_wait_vblank *vblwait = data;
        int ret;
        unsigned int flags, seq, pipe, high_pipe;

        if (!dev->irq_enabled)
                return -EINVAL;

        if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
                return -EINVAL;

        if (vblwait->request.type &
            ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK |
              _DRM_VBLANK_HIGH_CRTC_MASK)) {
                DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
                          vblwait->request.type,
                          (_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK |
                           _DRM_VBLANK_HIGH_CRTC_MASK));
                return -EINVAL;
        }

        flags = vblwait->request.type & _DRM_VBLANK_FLAGS_MASK;
        high_pipe = (vblwait->request.type & _DRM_VBLANK_HIGH_CRTC_MASK);
        if (high_pipe)
                pipe = high_pipe >> _DRM_VBLANK_HIGH_CRTC_SHIFT;
        else
                pipe = flags & _DRM_VBLANK_SECONDARY ? 1 : 0;
        if (pipe >= dev->num_crtcs)
                return -EINVAL;

        vblank = &dev->vblank[pipe];

        ret = drm_vblank_get(dev, pipe);
        if (ret) {
                DRM_DEBUG_VBLANK("failed to acquire vblank counter, %d\n", ret);
                return ret;
        }
        seq = drm_vblank_count(dev, pipe);

        switch (vblwait->request.type & _DRM_VBLANK_TYPES_MASK) {
        case _DRM_VBLANK_RELATIVE:
                vblwait->request.sequence += seq;
                vblwait->request.type &= ~_DRM_VBLANK_RELATIVE;
        case _DRM_VBLANK_ABSOLUTE:
                break;
        default:
                ret = -EINVAL;
                goto done;
        }

        if (flags & _DRM_VBLANK_EVENT) {
                /* must hold on to the vblank ref until the event fires
                 * drm_vblank_put will be called asynchronously
                 */
                return drm_queue_vblank_event(dev, pipe, vblwait, file_priv);
        }

        if ((flags & _DRM_VBLANK_NEXTONMISS) &&
            (seq - vblwait->request.sequence) <= (1<<23)) {
                vblwait->request.sequence = seq + 1;
        }

        DRM_DEBUG_VBLANK("waiting on vblank count %d, crtc %u\n",
                  vblwait->request.sequence, pipe);
        vblank->last_wait = vblwait->request.sequence;
        DRM_WAIT_ON(ret, vblank->queue, 3 * HZ,
                    (((drm_vblank_count(dev, pipe) -
                       vblwait->request.sequence) <= (1 << 23)) ||
                     !vblank->enabled ||
                     !dev->irq_enabled));

        if (ret != -EINTR) {
                struct timeval now;

                vblwait->reply.sequence = drm_vblank_count_and_time(dev, pipe, &now);
                vblwait->reply.tval_sec = now.tv_sec;
                vblwait->reply.tval_usec = now.tv_usec;

                DRM_DEBUG_VBLANK("returning %d to client\n",
                          vblwait->reply.sequence);
        } else {
                DRM_DEBUG_VBLANK("vblank wait interrupted by signal\n");
        }

done:
        drm_vblank_put(dev, pipe);
        return ret;
}

static void drm_handle_vblank_events(struct drm_device *dev, unsigned int pipe)
{
        struct drm_pending_vblank_event *e, *t;
        struct timeval now;
        unsigned int seq;

        assert_spin_locked(&dev->event_lock);

        seq = drm_vblank_count_and_time(dev, pipe, &now);

        list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
                if (e->pipe != pipe)
                        continue;
                if ((seq - e->event.sequence) > (1<<23))
                        continue;

                DRM_DEBUG_VBLANK("vblank event on %d, current %d\n",
                          e->event.sequence, seq);

                list_del(&e->base.link);
                drm_vblank_put(dev, pipe);
                send_vblank_event(dev, e, seq, &now);
        }

        trace_drm_vblank_event(pipe, seq);
}

/**
 * drm_handle_vblank - handle a vblank event
 * @dev: DRM device
 * @pipe: index of CRTC where this event occurred
 *
 * Drivers should call this routine in their vblank interrupt handlers to
 * update the vblank counter and send any signals that may be pending.
 *
 * This is the legacy version of drm_crtc_handle_vblank().
 */
bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe)
{
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
        unsigned long irqflags;

        if (WARN_ON_ONCE(!dev->num_crtcs))
                return false;

        if (WARN_ON(pipe >= dev->num_crtcs))
                return false;

        spin_lock_irqsave(&dev->event_lock, irqflags);

        /* Need timestamp lock to prevent concurrent execution with
         * vblank enable/disable, as this would cause inconsistent
         * or corrupted timestamps and vblank counts.
         */
        lockmgr(&dev->vblank_time_lock, LK_EXCLUSIVE);

        /* Vblank irq handling disabled. Nothing to do. */
        if (!vblank->enabled) {
                lockmgr(&dev->vblank_time_lock, LK_RELEASE);
                spin_unlock_irqrestore(&dev->event_lock, irqflags);
                return false;
        }

        drm_update_vblank_count(dev, pipe, DRM_CALLED_FROM_VBLIRQ);

        lockmgr(&dev->vblank_time_lock, LK_RELEASE);

        wake_up(&vblank->queue);
        drm_handle_vblank_events(dev, pipe);

        spin_unlock_irqrestore(&dev->event_lock, irqflags);

        return true;
}
EXPORT_SYMBOL(drm_handle_vblank);

/**
 * drm_crtc_handle_vblank - handle a vblank event
 * @crtc: where this event occurred
 *
 * Drivers should call this routine in their vblank interrupt handlers to
 * update the vblank counter and send any signals that may be pending.
 *
 * This is the native KMS version of drm_handle_vblank().
 *
 * Returns:
 * True if the event was successfully handled, false on failure.
 */
bool drm_crtc_handle_vblank(struct drm_crtc *crtc)
{
        return drm_handle_vblank(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_handle_vblank);

/**
 * drm_vblank_no_hw_counter - "No hw counter" implementation of .get_vblank_counter()
 * @dev: DRM device
 * @pipe: CRTC for which to read the counter
 *
 * Drivers can plug this into the .get_vblank_counter() function if
 * there is no useable hardware frame counter available.
 *
 * Returns:
 * 0
 */
u32 drm_vblank_no_hw_counter(struct drm_device *dev, unsigned int pipe)
{
        return 0;
}
EXPORT_SYMBOL(drm_vblank_no_hw_counter);