Initial import from FreeBSD RELENG_4:
[dragonfly.git] / sys / netgraph / ng_parse.h
1
2 /*
3  * ng_parse.h
4  *
5  * Copyright (c) 1999 Whistle Communications, Inc.
6  * All rights reserved.
7  * 
8  * Subject to the following obligations and disclaimer of warranty, use and
9  * redistribution of this software, in source or object code forms, with or
10  * without modifications are expressly permitted by Whistle Communications;
11  * provided, however, that:
12  * 1. Any and all reproductions of the source or object code must include the
13  *    copyright notice above and the following disclaimer of warranties; and
14  * 2. No rights are granted, in any manner or form, to use Whistle
15  *    Communications, Inc. trademarks, including the mark "WHISTLE
16  *    COMMUNICATIONS" on advertising, endorsements, or otherwise except as
17  *    such appears in the above copyright notice or in the software.
18  * 
19  * THIS SOFTWARE IS BEING PROVIDED BY WHISTLE COMMUNICATIONS "AS IS", AND
20  * TO THE MAXIMUM EXTENT PERMITTED BY LAW, WHISTLE COMMUNICATIONS MAKES NO
21  * REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THIS SOFTWARE,
22  * INCLUDING WITHOUT LIMITATION, ANY AND ALL IMPLIED WARRANTIES OF
23  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
24  * WHISTLE COMMUNICATIONS DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
25  * REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF THIS
26  * SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
27  * IN NO EVENT SHALL WHISTLE COMMUNICATIONS BE LIABLE FOR ANY DAMAGES
28  * RESULTING FROM OR ARISING OUT OF ANY USE OF THIS SOFTWARE, INCLUDING
29  * WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
30  * PUNITIVE, OR CONSEQUENTIAL DAMAGES, PROCUREMENT OF SUBSTITUTE GOODS OR
31  * SERVICES, LOSS OF USE, DATA OR PROFITS, HOWEVER CAUSED AND UNDER ANY
32  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
34  * THIS SOFTWARE, EVEN IF WHISTLE COMMUNICATIONS IS ADVISED OF THE POSSIBILITY
35  * OF SUCH DAMAGE.
36  *
37  * Author: Archie Cobbs <archie@freebsd.org>
38  *
39  * $Whistle: ng_parse.h,v 1.2 1999/11/29 01:43:48 archie Exp $
40  * $FreeBSD: src/sys/netgraph/ng_parse.h,v 1.2.4.4 2002/07/02 23:44:03 archie Exp $
41  */
42
43 #ifndef _NETGRAPH_PARSE_H_
44 #define _NETGRAPH_PARSE_H_
45
46 /*
47
48   This defines a library of routines for converting between various C
49   language types in binary form and ASCII strings.  Types are user
50   definable.  Several pre-defined types are supplied, for some common
51   C types: structures, variable and fixed length arrays, integer types,
52   variable and fixed length strings, IP addresses, etc.
53
54   A netgraph node type may provide a list of types that correspond to
55   the structures it expects to send and receive in the arguments field
56   of a control message.  This allows these messages to be converted
57   between their native binary form and the corresponding ASCII form.
58
59   A future use of the ASCII form may be for inter-machine communication
60   of control messages, because the ASCII form is machine independent
61   whereas the native binary form is not.
62
63   Syntax
64   ------
65
66     Structures:
67
68       '{' [ <name>=<value> ... ] '}'
69
70       Omitted fields have their default values by implication.
71       The order in which the fields are specified does not matter.
72
73     Arrays:
74
75       '[' [ [index=]<value> ... ] ']'
76
77       Element value may be specified with or without the "<index>=" prefix;
78       If omitted, the index after the previous element is used.
79       Omitted fields have their default values by implication.
80
81     Strings:
82
83       "foo bar blah\r\n"
84
85       That is, strings are specified just like C strings. The usual
86       backslash escapes are accepted.
87
88     Other simple types (integers, IP addresses) have their obvious forms.
89
90   Example
91   -------
92
93     Suppose we have a netgraph command that takes as an argument
94     a 'struct foo' shown below.  Here is an example of a possible
95     value for the structure, and the corresponding ASCII encoding
96     of that value:
97
98         Structure                       Binary value
99         ---------                       ------------
100
101         struct foo {
102             struct in_addr ip;          01 02 03 04
103             int bar;                    00 00 00 00
104             char label[8];              61 62 63 0a 00 00 00 00
105             u_char alen;                03 00
106             short ary[0];               05 00 00 00 0a 00
107         };
108
109         ASCII value
110         -----------
111
112         { ip=1.2.3.4 label="abc\n" alen=3 ary=[ 5 2=10 ] }
113
114     Note that omitted fields and array elements get their default
115     values ("bar" and ary[2]), and that the alignment is handled
116     automatically (the extra 00 byte after "num").  Also, since byte
117     order and alignment are inherently machine dependent, so is this
118     conversion process.  The above example shows an x86 (little
119     endian) encoding.  Also the above example is tricky because the
120     structure is variable length, depending on 'alen', the number of
121     elements in the array 'ary'.
122
123     Here is how one would define a parse type for the above structure,
124     subclassing the pre-defined types below.  We construct the type in
125     a 'bottom up' fashion, defining each field's type first, then the
126     type for the whole structure ('//' comments used to avoid breakage).
127
128     // Super-type info for 'label' field
129     struct ng_parse_fixedstring_info foo_label_info = { 8 };
130
131     // Parse type for 'label' field
132     struct ng_parse_type foo_label_type = {
133             &ng_parse_fixedstring_type          // super-type
134             &foo_label_info                     // super-type info
135     };
136
137     #define OFFSETOF(s, e) ((char *)&((s *)0)->e - (char *)((s *)0))
138
139     // Function to compute the length of the array 'ary', which
140     // is variable length, depending on the previous field 'alen'.
141     // Upon entry 'buf' will be pointing at &ary[0].
142     int
143     foo_ary_getLength(const struct ng_parse_type *type,
144             const u_char *start, const u_char *buf)
145     {
146             const struct foo *f;
147
148             f = (const struct foo *)(buf - OFFSETOF(struct foo, ary));
149             return f->alen;
150     }
151
152     // Super-type info for 'ary' field
153     struct ng_parse_array_info foo_ary_info = {
154             &ng_parse_int16_type,               // element type
155             &foo_ary_getLength                  // func to get array length
156     }
157
158     // Parse type for 'ary' field
159     struct ng_parse_type foo_ary_type = {
160             &ng_parse_array_type,               // super-type
161             &foo_ary_info                       // super-type info
162     };
163
164     // Super-type info for struct foo
165     struct ng_parse_struct_field foo_fields[] = {
166             { "ip",     &ng_parse_ipaddr_type   },
167             { "bar",    &ng_parse_int32_type    },
168             { "label",  &foo_label_type         },
169             { "alen",   &ng_parse_uint8_type    },
170             { "ary",    &foo_ary_type           },
171             { NULL }
172     };
173
174     // Parse type for struct foo
175     struct ng_parse_type foo_type = {
176             &ng_parse_struct_type,              // super-type
177             &foo_fields                         // super-type info
178     };
179
180   To define a type, you can define it as a sub-type of a predefined
181   type as shown above, possibly overriding some of the predefined
182   type's methods, or define an entirely new syntax, with the restriction
183   that the ASCII representation of your type's value must not contain
184   any whitespace or any of these characters: { } [ ] = "
185
186   See ng_ksocket.c for an example of how to do this for 'struct sockaddr'.
187   See ng_parse.c to see implementations of the pre-defined types below.
188
189 */
190
191 /************************************************************************
192                         METHODS REQUIRED BY A TYPE
193  ************************************************************************/
194
195 /*
196  * Three methods are required for a type. These may be given explicitly
197  * or, if NULL, inherited from the super-type.  The 'getDefault' method
198  * is always optional; the others are required if there is no super-type.
199  */
200
201 struct ng_parse_type;
202
203 /*
204  * Convert ASCII to binary according to the supplied type.
205  *
206  * The ASCII characters begin at offset *off in 'string'.  The binary
207  * representation is put into 'buf', which has at least *buflen bytes.
208  * 'start' points to the first byte output by ng_parse() (ie, start <= buf).
209  *
210  * Upon return, *buflen contains the length of the new binary data, and
211  * *off is updated to point just past the end of the parsed range of
212  * characters, or, in the case of an error, to the offending character(s).
213  *
214  * Return values:
215  *      0               Success; *buflen holds the length of the data
216  *                      and *off points just past the last char parsed.
217  *      EALREADY        Field specified twice
218  *      ENOENT          Unknown field
219  *      E2BIG           Array or character string overflow
220  *      ERANGE          Output was longer than *buflen bytes
221  *      EINVAL          Parse failure or other invalid content
222  *      ENOMEM          Out of memory
223  *      EOPNOTSUPP      Mandatory array/structure element missing
224  */
225 typedef int     ng_parse_t(const struct ng_parse_type *type, const char *string,
226                         int *off, const u_char *start,
227                         u_char *buf, int *buflen);
228
229 /*
230  * Convert binary to ASCII according to the supplied type.
231  *
232  * The results are put into 'buf', which is at least buflen bytes long.
233  * *off points to the current byte in 'data' and should be updated
234  * before return to point just past the last byte unparsed.
235  *
236  * Returns:
237  *      0               Success
238  *      ERANGE          Output was longer than buflen bytes
239  */
240 typedef int     ng_unparse_t(const struct ng_parse_type *type,
241                         const u_char *data, int *off, char *buf, int buflen);
242
243 /*
244  * Compute the default value according to the supplied type.
245  *
246  * Store the result in 'buf', which is at least *buflen bytes long.
247  * Upon return *buflen contains the length of the output.
248  *
249  * Returns:
250  *      0               Success
251  *      ERANGE          Output was longer than *buflen bytes
252  *      EOPNOTSUPP      Default value is not specified for this type
253  */
254 typedef int     ng_getDefault_t(const struct ng_parse_type *type,
255                         const u_char *start, u_char *buf, int *buflen);
256
257 /*
258  * Return the alignment requirement of this type.  Zero is same as one.
259  */
260 typedef int     ng_getAlign_t(const struct ng_parse_type *type);
261
262 /************************************************************************
263                         TYPE DEFINITION
264  ************************************************************************/
265
266 /*
267  * This structure describes a type, which may be a sub-type of another
268  * type by pointing to it with 'supertype' and possibly omitting methods.
269  * Typically the super-type requires some type-specific info, which is
270  * supplied by the 'info' field.
271  *
272  * The 'private' field is ignored by all of the pre-defined types.
273  * Sub-types may use it as they see fit.
274  *
275  * The 'getDefault' method may always be omitted (even if there is no
276  * super-type), which means the value for any item of this type must
277  * always be explicitly given.
278  */
279 struct ng_parse_type {
280         const struct ng_parse_type *supertype;  /* super-type, if any */
281         const void              *info;          /* type-specific info */
282         void                    *private;       /* client private info */
283         ng_parse_t              *parse;         /* parse method */
284         ng_unparse_t            *unparse;       /* unparse method */
285         ng_getDefault_t         *getDefault;    /* get default value method */
286         ng_getAlign_t           *getAlign;      /* get alignment */
287 };
288
289 /************************************************************************
290                         PRE-DEFINED TYPES
291  ************************************************************************/
292
293 /*
294  * STRUCTURE TYPE
295  *
296  * This type supports arbitrary C structures.  The normal field alignment
297  * rules for the local machine are applied.  Fields are always parsed in
298  * field order, no matter what order they are listed in the ASCII string.
299  *
300  *   Default value:             Determined on a per-field basis
301  *   Additional info:           struct ng_parse_struct_field *
302  */
303 extern const struct ng_parse_type ng_parse_struct_type;
304
305 /* Each field has a name, type, and optional alignment override. If the
306    override is non-zero, the alignment is determined from the field type.
307    Note: add an extra struct ng_parse_struct_field with name == NULL
308    to indicate the end of the list. */
309 struct ng_parse_struct_field {
310         const char                      *name;          /* field name */
311         const struct ng_parse_type      *type;          /* field type */
312         int                             alignment;      /* override alignment */
313 };
314
315 /*
316  * FIXED LENGTH ARRAY TYPE
317  *
318  * This type supports fixed length arrays, having any element type.
319  *
320  *   Default value:             As returned by getDefault for each index
321  *   Additional info:           struct ng_parse_fixedarray_info *
322  */
323 extern const struct ng_parse_type ng_parse_fixedarray_type;
324
325 /*
326  * Get the default value for the element at index 'index'.  This method
327  * may be NULL, in which case the default value is computed from the
328  * element type.  Otherwise, it should fill in the default value at *buf
329  * (having size *buflen) and update *buflen to the length of the filled-in
330  * value before return.  If there is not enough routine return ERANGE.
331  */
332 typedef int     ng_parse_array_getDefault_t(const struct ng_parse_type *type,
333                                 int index, const u_char *start,
334                                 u_char *buf, int *buflen);
335
336 struct ng_parse_fixedarray_info {
337         const struct ng_parse_type      *elementType;
338         int                             length;
339         ng_parse_array_getDefault_t     *getDefault;
340 };
341
342 /*
343  * VARIABLE LENGTH ARRAY TYPE
344  *
345  * Same as fixed length arrays, except that the length is determined
346  * by a function instead of a constant value.
347  *
348  *   Default value:             Same as with fixed length arrays
349  *   Additional info:           struct ng_parse_array_info *
350  */
351 extern const struct ng_parse_type ng_parse_array_type;
352
353 /*
354  * Return the length of the array.  If the array is a field in a structure,
355  * all prior fields are guaranteed to be filled in already.  Upon entry,
356  * 'start' is equal to the first byte parsed in this run, while 'buf' points
357  * to the first element of the array to be filled in.
358  */
359 typedef int     ng_parse_array_getLength_t(const struct ng_parse_type *type,
360                                 const u_char *start, const u_char *buf);
361
362 struct ng_parse_array_info {
363         const struct ng_parse_type      *elementType;
364         ng_parse_array_getLength_t      *getLength;
365         ng_parse_array_getDefault_t     *getDefault;
366 };
367
368 /*
369  * ARBITRARY LENGTH STRING TYPE
370  *
371  * For arbirary length, NUL-terminated strings.
372  *
373  *   Default value:             Empty string
374  *   Additional info:           None required
375  */
376 extern const struct ng_parse_type ng_parse_string_type;
377
378 /*
379  * BOUNDED LENGTH STRING TYPE
380  *
381  * These are strings that have a fixed-size buffer, and always include
382  * a terminating NUL character.
383  *
384  *   Default value:             Empty string
385  *   Additional info:           struct ng_parse_fixedstring_info *
386  */
387 extern const struct ng_parse_type ng_parse_fixedstring_type;
388
389 struct ng_parse_fixedstring_info {
390         int     bufSize;        /* size of buffer (including NUL) */
391 };
392
393 /*
394  * COMMONLY USED BOUNDED LENGTH STRING TYPES
395  */
396 extern const struct ng_parse_type ng_parse_nodebuf_type;  /* NG_NODELEN + 1 */
397 extern const struct ng_parse_type ng_parse_hookbuf_type;  /* NG_HOOKLEN + 1 */
398 extern const struct ng_parse_type ng_parse_pathbuf_type;  /* NG_PATHLEN + 1 */
399 extern const struct ng_parse_type ng_parse_typebuf_type;  /* NG_TYPELEN + 1 */
400 extern const struct ng_parse_type ng_parse_cmdbuf_type;   /* NG_CMDSTRLEN + 1 */
401
402 /*
403  * INTEGER TYPES
404  *
405  *   Default value:             0
406  *   Additional info:           None required
407  */
408 extern const struct ng_parse_type ng_parse_int8_type;
409 extern const struct ng_parse_type ng_parse_int16_type;
410 extern const struct ng_parse_type ng_parse_int32_type;
411 extern const struct ng_parse_type ng_parse_int64_type;
412
413 /* Same thing but unparse as unsigned quantities */
414 extern const struct ng_parse_type ng_parse_uint8_type;
415 extern const struct ng_parse_type ng_parse_uint16_type;
416 extern const struct ng_parse_type ng_parse_uint32_type;
417 extern const struct ng_parse_type ng_parse_uint64_type;
418
419 /* Same thing but unparse as hex quantities, e.g., "0xe7" */
420 extern const struct ng_parse_type ng_parse_hint8_type;
421 extern const struct ng_parse_type ng_parse_hint16_type;
422 extern const struct ng_parse_type ng_parse_hint32_type;
423 extern const struct ng_parse_type ng_parse_hint64_type;
424
425 /*
426  * IP ADDRESS TYPE
427  *
428  *   Default value:             0.0.0.0
429  *   Additional info:           None required
430  */
431 extern const struct ng_parse_type ng_parse_ipaddr_type;
432
433 /*
434  * VARIABLE LENGTH BYTE ARRAY TYPE
435  *
436  * The bytes are displayed in hex.  The ASCII form may be either an
437  * array of bytes or a string constant, in which case the array is
438  * zero-filled after the string bytes.
439  *
440  *   Default value:             All bytes are zero
441  *   Additional info:           ng_parse_array_getLength_t *
442  */
443 extern const struct ng_parse_type ng_parse_bytearray_type;
444
445 /*
446  * NETGRAPH CONTROL MESSAGE TYPE
447  *
448  * This is the parse type for a struct ng_mesg.
449  *
450  *   Default value:             All fields zero
451  *   Additional info:           None required
452  */
453 extern const struct ng_parse_type ng_parse_ng_mesg_type;
454
455 /************************************************************************
456                 CONVERSTION AND PARSING ROUTINES
457  ************************************************************************/
458
459 /* Tokens for parsing structs and arrays */
460 enum ng_parse_token {
461         T_LBRACE,               /* '{' */
462         T_RBRACE,               /* '}' */
463         T_LBRACKET,             /* '[' */
464         T_RBRACKET,             /* ']' */
465         T_EQUALS,               /* '=' */
466         T_STRING,               /* string in double quotes */
467         T_ERROR,                /* error parsing string in double quotes */
468         T_WORD,                 /* anything else containing no whitespace */
469         T_EOF,                  /* end of string reached */
470 };
471
472 /*
473  * See typedef ng_parse_t for definition
474  */
475 extern int      ng_parse(const struct ng_parse_type *type, const char *string,
476                         int *off, u_char *buf, int *buflen);
477
478 /*
479  * See typedef ng_unparse_t for definition (*off assumed to be zero).
480  */
481 extern int      ng_unparse(const struct ng_parse_type *type,
482                         const u_char *data, char *buf, int buflen);
483
484 /*
485  * See typedef ng_getDefault_t for definition
486  */
487 extern int      ng_parse_getDefault(const struct ng_parse_type *type,
488                         u_char *buf, int *buflen);
489
490 /*
491  * Parse a token: '*startp' is the offset to start looking.  Upon
492  * successful return, '*startp' equals the beginning of the token
493  * and '*lenp' the length.  If error, '*startp' points at the
494  * offending character(s).
495  */
496 extern enum     ng_parse_token ng_parse_get_token(const char *s,
497                         int *startp, int *lenp);
498
499 /*
500  * Like above, but specifically for getting a string token and returning
501  * the string value.  The string token must be enclosed in double quotes
502  * and the normal C backslash escapes are recognized.  The caller must
503  * eventually free() the returned result.  Returns NULL if token is
504  * not a string token, or parse or other error.
505  */
506 extern char     *ng_get_string_token(const char *s, int *startp, int *lenp);
507
508 /*
509  * Convert a raw string into a doubly-quoted string including any
510  * necessary backslash escapes.  Caller must free the result.
511  * Returns NULL if ENOMEM.
512  */
513 extern char     *ng_encode_string(const char *s);
514
515 #endif /* _NETGRAPH_PARSE_H_ */
516